• 무역상무연구
• /
• 제59권
• /
• pp.81-112
• /
• 2013

This article intends to examine main features of revision in relation to the duration of cover in the Institute Cargo Clauses 2009 and the results of analysis are as followings. First, the cover, which had been "warehouse to warehouse", has been extended to what may be called "shelf to unloading". Thus the insurance attaches when the goods are first moved within the warehouse or place of storage at the named place for the purpose of immediate loading for the commencement of transit. Secondly, the new termination Clause 8.1.3 requires an election by the assured, or their employees, to use a vehicle or container, for storage other than in the ordinary course of transit. Thirdly, Clause 10.1, which deals with the assured's voluntary change of voyage, was amended to solve the problem that the words "held covered" could be misunderstood by an assured without specialist knowledge of English marine insurance law to be a guarantee of cover, even where cover would not be commercially available. Finally, Clause 10.2 is designed to solve the so-called "phantom ship problem", arising from the harsh decision in The Prestrioka. The new Clause 10.2 provides protection for an innocent assured in the situation of a phantom ship.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.1-6
• /
• 2017

Modern society has been experiencing by population growth and urbanization that bring, a change of eating habits which has occurred a various types of waste in a large amount. Even though these wastes are required an immediate treatment with difficulties unsanitary handling and existing waste treatment method are by incineration, fermentation, drying and etc. however a bad smell occurs after the treatment that need's a lot of energy in processing organic wastes with high moisture contents and wasteful and inefficient problem. The strength assessment of the organic waste agitating vessel is required in terms of safety due to the differences of loading on the shaft that was treated by agitating the mixture of food waste. The damage of agitating axis is depended on steam pressure, temperature condition and the force moment that exerted by the food waste. Thus the strength assessment and stability evaluation are very important, especially to handle a hard waste. In this study the rotation capacity of agitation is about 5 tons considering general structural rolled steel pressure vessel strength and steam pressure. The purpose is to estimate the safety and strength evaluation for a agitator axis and impellers according to the rotating angle of the axis under the condition of the 3.2 ton capacity reactor.

• Carbon letters
• /
• 제5권3호
• /
• pp.108-112
• /
• 2004

Effect of silicon infiltration on the bend and tensile strength of 2D cross-ply carbon-carbon composites are studied. It is observed that bend strength higher than tensile strength in both types of composite is due to the different mode of fracture and loading direction. After silicon infiltrations bend and tensile strength suddenly decreases of carbon-carbon composites. This is due to the fact that, after silicon infiltration, silicon in the immediate vicinity of carbon forms the strong bond between carbon and silicon by formation silicon carbide and un-reacted silicon as free silicon. Therefore, these composites consist of three components carbon, silicon carbide and silicon. Due to mismatch between these three components secondary cracks developed and these cracks propagate from $90^{\circ}$ oriented plies to $0^{\circ}$ oriented plies by damaging the fibers (i.e., in-situ fiber damages). Hence, secondary cracks and in-situ fiber damages are responsible for degradation of mechanical properties of carbon-carbon composites after silicon infiltration which is revealed by microstructure investigation study by scanning electron microscope.

• Acute and Critical Care
• /
• 제33권4호
• /
• pp.271-275
• /
• 2018

We experienced a case of severe intraoperative hyperkalemia during laparoscopic radical nephrectomy in a 60-year-old male patient with renal insufficiency, whose hypertension had been managed by preoperative angiotensin II receptor blocker (ARB) and adrenergic beta-antagonist. After renal vessel ligation, his intraoperative potassium concentration suddenly increased to 7.0 mEq/L, but his electrocardiography (ECG) did not show any significant change. While preoperative ARB therapy has been regarded as a contributing factor for further aggravation of underlying renal insufficiency, we assumed that nephrectomy itself and rhabdomyolysis caused by surgical trauma also aggravated the underlying renal dysfunction and resulted in sudden hyperkalemia. Hyperkalemia was managed successfully with calcium gluconate, insulin, furosemide and crystalloid loading during the intraoperative and immediate postoperative periods, and potassium concentration decreased to 5.0 mEq/L at 8 hours after the operation. The patient's hospital course was uncomplicated, but his renal function deteriorated further.

• 대한치과보철학회지
• /
• 제39권5호
• /
• pp.463-476
• /
• 2001

Since the treatment of edentulous patients with osseointegrated implant was first introduced more than 30 years ago, implant therapy has become one of the most important dental treatment modalities today. Based on the previous experience and knowledge, $Br{\aa}nemark\;Novum^{(R)}$ protocol was introduced with the concept of simplifying surgical and prosthetic technique and reducing healing time recently. This protocol recommends the installation of three 5mm wide diameter futures in anterior mandible and the prefabricated titanium bars for superstructure fabrication. This study was designed to analyze the stress distribution at fixture and superstructure area according to changes of fixture number, diameter and superstructure materials. Four 3-dimensional finite element models were fabricated. Model 1 - 5 standard fixtures (13mm long and 3.75mm in diameter) & superstructure consisted of type IV gold alloy and resin Model 2- 3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of type IV gold alloy and resin Model 3-3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of titanium and resin Model 4-3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of titanium and porcelain A 150N occlusal force was applied on the 1st molar of each model in 3 directions - vertical($90^{\circ}$), horizontal($0^{\circ}$) and oblique($120^{\circ}$). After analyzing the stresses and displacements, following results were obtained. 1. There were no significant difference in stress distribution among experimental models. 2. Model 2, 3, 4 showed less amount of compressive stress than that of model 1. However, tensile stress was similar. 3. Veneer material with a high modulus of elasticity demonstrated less stress accumulation in the superstructure. Within the limites of this study, $Br{\aa}nemark\;Novum^{(R)}$ protocol demonstrated comparable biomechanical properties to conventional protocol.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.27.1-27.9
• /
• 2019

Background: Implants are becoming the first choice of rehabilitation for tooth loss. Even though they have a high success rate, failures still occur for many reasons. The objective of this study is to analyze the reasons for recurring failure at the same site and the results of re-implantation. Methods: Thirteen patients (11 males and 2 females, mean age 60 ± 9.9 years) who experienced implant surgery failure at the same site (same tooth extraction area) two or more times in the Department of Oral and Maxillofacial Surgery, Seoul National University Bundang Hospital, between 2004 and 2017 were selected. The medical records on a type, sites, diameter, and length of implants; time and estimated cause of failure; and radiographs were reviewed. Data were collected and analyzed retrospectively, and the current statuses were evaluated. Results: A total of 14 implants experienced failure in the same site more than two times. Twelve implants were placed in the maxilla, while 2 implants were placed in the mandible. The maxillary molar area was the most common site of failure (57.1%), followed by the mandibular molar, anterior maxilla, and premolar areas (14.3% each). The first failure occurred most commonly after prosthetic treatment (35.7%) with an average period of failure of 3.8 months after loading. Ten cases were treated as immediate re-implantation, while the other 4 were delayed reimplantation after an average of 3.9 months. The second failure occurred most commonly after prosthetic treatment (42.9%), with an average of 31 months after loading; during the healing period (42.9%); and during the ongoing prosthetic period (14.3%). In 3 cases (21.4%), the treatment plan was altered to an implant bridge, while the other 11 cases underwent another implant placement procedure (78.6%). Finally, a total of 9 implants (64.3%) survived, with an average functioning period of 60 months. Conclusions: Implants can fail repeatedly at the same site due to overloading, infection, and other unspecified reasons. The age and sex of the patient and the location of implant placement seem to be associated with recurring failure. Type of implant, bone augmentation, and bone materials used are less relevant.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.25-34
• /
• 2009

큰 휨 지지력을 제공하는 테두리 보가 없이 기둥과 바닥판만으로 구성된 플랫 플레이트 시스템은 응력 조건뿐만 아니라 사용성 조건에 의하여 구조적 성능이 결정될 수 있다. 시공 순서 및 그에 따른 동바리로 연결되어 있는 슬래브들 간의 시공 하중 분포에 대한 영향이 플랫 플레이트의 단기 및 장기 성능에 대한 중요한 영향 요소가 될 수 있다. 이 연구에서는 슬래브 처짐 산정을 위하여, 선형해석 프로그램을 이용하여 시공 순서 및 콘크리트 균열효과를 고려할 수 있는 실용해석 기법을 제시한다. 구조설계기준에서 제시하고 있는 1방향 휨부재의 처짐 산정을 위한 유효단면 2차 모멘트의 개념을 2방향 슬래브 시스템인 플랫 플레이트의 유한요소해석에 확장하여 적용한다. 플랫 플레이트 시스템의 처짐에 대한 시공 중 과하중의 영향을 분석하기 위하여, 간편법에 의하여 산정된 시공 하중의 지배조건들에 대하여 제안된 실용해석 기법을 적용한다.

• Geomechanics and Engineering
• /
• 제8권4호
• /
• pp.615-630
• /
• 2015

The use of helical anchors has been extensively beyond their traditional use in the electrical power industry in recent years. They are commonly used in more traditional civil engineering infrastructure applications so that the advantages of rapid installation and immediate loading capability. The majority of the research has been directed toward the tensile uplift behaviour of single anchors (only one plate) by far. However, anchors commonly have more than one plate. Moreover, no thorough numerical and experimental analyses have been performed to determine the ultimate pullout loads of multi-plate anchors. The understanding of behavior of these anchors is unsatisfactory and the existing design methods have shown to be largely inappropriate and inadequate for a framework adopted by engineers. So, a better understanding of helical anchor behavior will lead to increased confidence in design, a wider acceptance as a foundation alternative, and more economic and safer designs. The main aim of this research is to use numerical modeling techniques to better understand multi-plate helical anchor foundation behavior in soft clay soils. Experimental and numerical investigations into the uplift capacity of helical anchor in soft clay have been conducted in this study. A total of 6 laboratory tests were carried out using helical anchor plate with a diameter of 0.05 m. The results of physical and computational studies investigating the uplift response of helical anchors in soft clay show that maximum resistances depend on anchor embedment ratio and anchor spacing ratio S/D. Agreement between uplift capacities from laboratory tests and finite element modelling using PLAXIS is excellent for anchors up to embedment ratios of 6.

• The Journal of Advanced Prosthodontics
• /
• 제7권3호
• /
• pp.191-198
• /
• 2015

PURPOSE. The purpose of this study was to compare the coronal bone level and patient satisfaction in 1-implant and 2-implant assisted mandibular overdentures. MATERIALS AND METHODS. Twenty patients who had maladaptive mandibular dentures were treated in this study. Patients were randomly divided into two groups. The first group received 1 implant (Simple line II, Implantium, South Korea) in their mandibular midline and the second group received 2 implants in their B and D regions (according to Misch's category). If the primary stability of each implant was at least 60 ISQ, ball attachment was placed and denture relined with soft liner. After 6 weeks, retentive cap incorporated with hard acrylic resin. In the 6 and 12 months recalls, periapical digital radiograph were made and visual analogue scale questionnaires were used to record patient satisfaction. The Friedman test was done for comparing the presurgical and postsurgical parameters in each group and the U-Mann Whitney test (P<.05) was done for comparison of post-treatment results between the two groups. RESULTS. All implants achieved sufficient primary stability to be immediately loaded. Patient satisfaction was high, and there were no significant differences between two groups (P>.05). In addition, mean marginal bone loss was $0.6{\pm}0.67$ mm in the first group and $0.6{\pm}0.51$ mm in the second group, after 12 month. Mean marginal bone loss showed no significant differences between two groups. CONCLUSION. This preliminary one-year result indicated that mandibular overdentures anchored to a single implant can be a safe and cost-effective method as a starting step for implant-overdenture treatment.

• 대한치과교정학회지
• /
• 제29권6호
• /
• pp.699-706
• /
• 1999

고정원의 조절은 교정치료에 있어서 매우 중요한 요소로 이를 보강하기 위한 많은 노력이 있어왔다. 골융합성 임프란트의 경우 확실한 고정원으로서 가능성이 인정되고 있고, 또 임상에서 많이 시도되고 있다. 그러나 임프란트를 매식하기 위해서는 무치악이 존재해야 하거나 하악구치 후방부위에 식립해야 하는 등 장소의 제약이 있고, 값이 비싸며, 골융합을 위하여 기다리는 시간이 필요하다는 등의 단점으로 인하여 보편화되고 있지는 않다. 최근 몇몇 임상가에 의하여 수술용 titanium microscrew 나 miniscrew를 교정치료시의 고정원으로 사용하려는 시도가 있었는데, 이것은 골융합성 임프란트보다 수술이 간단하며, 가격이 저렴하고, 치조골 어느 부위이든지 식립할 수 있다는 장점이 있다. 저자는 titanium microscrew implant를 사용한 skeletal cortical anchorage를 이용하여 통상적인 교정치료 동안 협조도가 고갈된 환자를 치료하였다. 6개월간의 titanium microscrew로 부터 가해진 교정력에 의하여 상악 전치부는 4 mm후방 치체이동과 압하이동을 얻었다. 통상의 교정치료에서 고정원역할을 하는 상악 구치부도 1.5 mm후방이동 되었다. titanium microscrew는 치료기간 동안 움직임없이 잘 유지되었다. 비록 과학적으로 밝혀져야할 임상적인 문제가 있기는 하나, skeletal cortical anchorage는 확실한 고정원으로서의 역할을 할 수 있을 것으로 생각된다.