• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.155-158
• /
• 2008

Flow imbalance among the cavities was often observed in multi-cavity mold. The flow imbalance affects on the dimensions and physical properties of molded articles. First of all, the origin of flow imbalance is geometrical imbalance of delivery system. However, even the geometry of delivery system is balanced the cavity imbalance is being developed. This comes from the temperature distribution in the cross-section of runner, which is affected by the operational conditions. In this study, experimental study of flow imbalance has been conducted for various injection speeds. This study also suggests new runner design to eliminate flow imbalance in multi-cavity injection mold. Simulation and experimental results showed suggested new designed runner could eliminate or reduce flow imbalance in multi-cavity injection mold.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.329-332
• /
• 2008

Flow imbalance among the cavities was often observed in multi-cavity mold. The flow imbalance affects on the dimensions and physical properties of melded articles. First of all, the origin of flow imbalance is geometrical imbalance of delivery system. However, even the geometry of delivery system is balanced the cavity imbalance is being developed. This comes from the temperature distribution in the cross-section of runner, which is affected by the operational conditions. In this study, experimental study of flow imbalance has been conducted for various injection speeds. This study also suggests new runner design to eliminate flow imbalance in multi-cavity injection mold. Simulation and experimental results showed suggested new designed runner could eliminate or reduce flow imbalance in multi-cavity injection mold.

• 한국정밀공학회지
• /
• 제25권4호
• /
• pp.47-52
• /
• 2008

Recently, the study for filling imbalance in thermoplastic polymer has gradually been increased. However, it is hard to find the researches for filling imbalance of thermoplastic elastomer(TPE). The experiment of filling imbalance was conducted for the three kinds of thermoplastic vulcanizes(TPVs) and PP polymer in the mold with geometrically balanced runner system(Unary Branch Type Runner System). In this experiment, the effects of the melt temperature, injection pressure and injection speed on the filling imbalance were investigated. There was also the imbalance in TPV injection molding process as well as in conventional injection molding with plastics. The tendency of filling imbalance in TPV injection molding specially decreased by taking place the hesitation of TPV melt.

• Design & Manufacturing
• /
• 제2권4호
• /
• pp.5-10
• /
• 2008

Recently, the study for filling imbalance in thermoplastic polymer has gradually been increased. However, it is hard to find the researches for filling imbalance of thermoplastic elastomer(TPE). The experiment of filling imbalance was conducted for the three kinds of thermoplastic vulcanizes(TPVs) and PP polymer in the mold with geometrically balanced runner system(Unary Branch Type Runner System). In this experiment, the effects of the melt temperature, injection pressure and injection speed on the filling imbalance were investigated. There was also the imbalance in TPV injection molding process as well as in conventional injection molding with plastics. The tendency of filling imbalance in TPV injection molding specially decreased by taking place the hesitation of TPV melt.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.931-937
• /
• 2004

Simultaneous filling is a goal in plastic injection mold that has multi cavities. The moldings which have not been filled at the same time have undesired faults such as dimension inaccuracy, residual stress, law mechanical strength, etc. The best way to simultaneous fill is to be injected in a geometrically balanced runner system. In a general processing, however, in balanced runner system mold, filling imbalance would be observed in cavities. These phenomena result from molten polymer's characteristics and circumstances in balanced runner. In this study, the degree of filling imbalance (DFI) was defined for showing rate of filling imbalance in geometrically balanced injection mold that has 8 cavities. Before the main experiment, an injection molding simulation was conducted to know a pattern of filling imbalance with Moldflow software. There were somewhat differences between results of experiment and simulation about the filling imbalance. The reason for the difference was that the software have not concerned about a situation in a real flow channel. It was also investigated how the injection speed affected on filling imbalance in the experiment.

• Journal of electromagnetic engineering and science
• /
• 제6권3호
• /
• pp.182-188
• /
• 2006

Orthogonal frequency division multiplexing(OFDM) is very useful for the wireless communication system. However, OFDM is very sensitive to the radio frequency impairments. One of the most important major impairments is the IQ imbalance between in-phase(l) and quadrature(Q) branches in the up and down-conversion. IQ imbalance can be divided into phase and amplitude imbalances. These imbalances make constellation of signal to expand and rotate. The performance of system is severely degraded. In this paper, a closed-form for the bit error probability of the OFDM signal in IQ imbalance environment is derived in terms of the function of phase and amplitude imbalance parameters. So, it will be convenient and useful to evaluate the performance of OFDM communication system with IQ imbalance. It is confirmed that computer simulation results closely match with the results of the analytical derivation. When phase imbalance $\varphi=20^{\circ}$, amplitude imbalance $\varepsilon=0.1$; 0.3; 0.4; 0.5, BER at $10^{-5}$ is severely degraded by 1.8 dB, 3.12 dB, 4.72, and 8.44 dB, respectively.

• 한국통신학회논문지
• /
• 제32권9C호
• /
• pp.905-912
• /
• 2007

본 논문에서는 OFDM 기반 무선 LAN 시스템에서 긴 훈련심볼을 이용하는, 시간동기 오차의 영향이 고려된 IQ imbalance 추정 및 보상 기법을 제안한다. 기존의 긴 훈련심볼을 이용한 IQ imbalance 보상 기법은 시간동기 오차에 민감한 구조를 갖기 때문에 시간동기 오차가 필연적인 실제 시스템에서는 심각한 성능 저하를 보인다. 본 논문에서는 시간동기 오차로 인해 발생하는 위상회전을 상쇄시킬 수 있는 새로운 criterion을 정의하고, 이에 따른 IQ imbalance 추정 및 보상 기법을 제안한다. 제안된 기법은 시간동기 오차가 존재할 경우에도 IQ imbalance 의 영향을 이상적인 경우 대비 최대 0.2dB 이하로 보상할 수 있으며, IEEE 802.11a 시스템의 54Mbps 전송모드에 적용하였을 경우 기존 기법에 비해 약 4.3dB의 성능 이득을 보인다. 제안된 기법을 이용한 IQ imbalance 추정 및 보상단은 Verilog HDL을 이용하여 하드웨어 설계 및 검증 되었으며, 0.18um CMOS 공정을 이용하여 합성한 결과, 약 75K gates 와 6K bits의 메모리로 구현되었다.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.41-46
• /
• 2007

Recently, the study for filling imbalance in thermoplastic polymer has gradually been increased. However, it is hard to find the researches for filling imbalance of thermoplastic elastomer(TPE). The experiment of filling imbalance was conducted for the three kinds of thermoplastic vulcanizes(TPVs) in the mold with geometrically balanced runner system. In this experiment, the effects of the melt temperature and injection speed on the filling imbalance were investigated. To solve the filling imbalance, Runner Core pin(RC pin) in the experimental mold was adopted and it's effects was tested. In this paper, we present that the insert length of RC pin is dependent to each polymers for optimal filling balance.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.529-536
• /
• 2016

Magnetically suspended sensitive gyroscopes (MSSGs) provide an interesting alternative for achieving precious attitude angular measurement. To effectively reduce the measurement error caused by dynamic imbalance, this paper proposes a novel compensation method based on analysis and modeling of the error for a MSSG. Firstly, the angular velocity measurement principle of the MSSG is described. Then the analytical model of dynamic imbalance error has been established by solving the complex coefficient differential dynamic equations of the rotor. The generation mechanism and changing regularity of the dynamic imbalance error have been revealed. Next, a compensation method is designed to compensate the dynamic imbalance error and improve the measurement accuracy of the MSSG. The common issues caused by dynamic imbalance can be effectively resolved by the proposed method in gyroscopes with a levitating rotor. Comparative simulation results before and after compensation have verified the effectiveness and superiority of the proposed compensation method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.266-270
• /
• 2007

Small injection molded articles such as lens and mobile product's parts are usually molded in multi-cavity mold. The problems occurred in multi-cavity molding are flow imbalance among the cavities. The flow imbalance affects on the dimensions and physical properties of molded articles. First of all, the origin of flow imbalance is geometrical imbalance of delivery system. However, even the geometry of delivery system is balanced well the cavity imbalance is being developed. This comes from the unsuitable operational conditions of injection molding. Among the operational conditions, injection speed is the most significant process variable affecting the filling imbalances in multi-cavity injection molding. In this study, experimental study of flow imbalance has been conducted for various injection speeds and materials. Also, the filling Imbalances were compared with CAE results. The dimensions and physical state of multi-cavity molded parts were examined. The results showed that the filling imbalances vary according to the injection speed and flow property of resins. Subsequently, the imbalanced filling and pressure distribution in the multi-cavity affect on the dimensions and physical states of molded parts.