• Journal of Korea Multimedia Society
• /
• v.21 no.2
• /
• pp.181-187
• /
• 2018

Line-laser beams are used for depth measurement of welding beads along the circumference of a pipe. For this, first we project a line-laser beam on an rotating pipe and take a sequence of images of the beam projected on the pipe using a CCD camera. Second, the projected line laser beam in each image is detected, converted into a thin curve. Finally measure the distance between the thinned curve and an imaginary line. When a line-laser beam is projected to a rough metal surface such as arc welding beads, the beam is severely scattered. This severe scattering makes the thinned curve perturbed. In this paper, we propose a thinning method robust against scattering of line lasers. First, we extract a projected line laser beam region using an adaptive threshold. Second, we model a thinned curve with a spline curve with control points. Next, we adjust the control points to fit the curve to the projected line-laser beam. Finally, we take a weighted mean of thin curves on a sequence of image frames. Experiments shows that the proposed thinning method results in a thinning curve, which is smooth and fit to the projected line-laser beam with small error.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.4
• /
• pp.207-214
• /
• 1996

Main cause of low back pain is a poor posture. Most low back pains are due to a poor posture. The poor posture induces muscle tension and finaliy low back pain. The poor posture arehabitually trained from the childhood by the environmetal factors. In general, maintaining good posture during working and sleeping hours are the first line of defence against back pam. (1) Supine posture is the easiest posture that relaxes and fixes muscles. Supine posture is thus a starting position for on exercise. Lying down releases the weight pressures of head and shoulder and thus body can be relaxed and extended which are helpful for treating back pain. However, supine posture can increase the pressure in ribcage posture aspect and disphragram due to visceral oragans. (2) Sitting in one position for a long time results in fatigue and relaxation of spinal muscies. Finally, body strength is weakened and sitting posture will become poor. If this poor posture continues for a longer time, pain will be accompanied due to overelongation of muscle ligaments. The habitual poor posture could induce intervertebral disc distortion. If the intervertebral disc is damaged, sitting in one position or movement causes pain. (3) Abnormal lumbar curve induces the tention of abdominal muscle and paravertebral muscle groups as well as tention of lower limb muscle group connected to pelvis. For a person with weak body strength, muscle relaxation increases curvature in lumbar, chest and cervical regions. This will induce a pelvic anterior tilting of the imaginary line between A. S. I. S. and P. S. I. S. Hip joint extensor muscle acts on releasing the pelvic anterior tilting. Contrections of hamstring muscle and femoral muscle recover the imaginary line between A.S.LS. and P.S.I.S. from pelvic anterior tilting. thus, contraction of rectus abdominis muscle are required to maintain the normal lumbar curve.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.24-28
• /
• 2005

Stress state of chip formation zone is one of the main problems in metal cutting mechanics. In two-dimensional case this process is usually considered as consistent shears of work material along one of several shear surfaces, separating chip from workpiece. These shear planes are assumed to be trajectories of maximum shear stress forming corresponding slip-line field. This paper suggests a new approach to the constriction of slip-line field, which implies uniform compression in chip formation zone. Based on the given model it has been found that imaginary shear line in orthogonal cutting is close to the trajectory of maximum normal stress and the problem about its determination has been considered as well. It has been shown that there is a second central slip-line field inside chip, which corresponds well to experimental data about stress distribution on tool rake face and tool-chip contact length. The suggested model would be useful in understanding mechanistic problems in machining.

• Journal of Information Technology Applications and Management
• /
• v.28 no.3
• /
• pp.77-87
• /
• 2021

The color gray in the cinema expresses the private or public memory and oblivion in the reminiscence scenes. The aesthetic function and meaning of gray that interacts with other elements in cinematic time and space are expanded in various ways. This study was analyzed the cases in which gray was used as the main visual style by limiting the scope to Korean films. Based on the traditional cultural symbolic meaning of gray, I analyzed how it was applied and transformed in films, and interpreted the cultural-social meaning by the interaction between gray and other elements. In film history starting from monochrome, gray has been used as a visual device suitable for realizing cinematic or imaginary reality. Gray is adopted when dreams or recollections are visualized as imaginary reality, and it is used when dreamy imaginations of daydreaming are demonstrated. Gray, which reproduces the dreamlike reality of imagination, is the concrete and realistic way of expression. First, in Korean films, gray is a flashback visual device that recalls the past, and is an intermediary visual form that materializes the imaginary. In films such as Ode to My Father (2014), DongJu (2015), A Resistance(2019) and The Battle : Roar to Victory (2019), the gray of the past is a visual device for cultural memory that builds the homogeneity and identity of the group. In the era of hyper-visibility, gray in black and white images is intended to be clearly remembered by unfamiliarity rather than blurry oblivion by familiarity. Second, in genre films with disaster materials such as Train To Busan (2016) and Ashfall (2019), the grays of rain, fog, clouds, shadows and smoke highlight other elements, and the gray color causes anxiety and fear. In war films such as TaeGukGi: Brotherhood Of War (2003) and The Front Line (2011), gray shows a more intense brutality than the primary color. In sports films such as 4th Place (2015), Take Off (2009) and Forever The Moment (2007), gray expresses uncertainty and immaturity. Third, gray visualizes the historical memory of A Petal (1996), the oblivion in Oh! My Gran (2020) and Poetry (2010), and the reality of daydreaming Gagman (1988) and Dream (1990). At the boundary between imagination and reality, gray is a visual form of dreams, memories and forgetfulness.

• Journal of Broadcast Engineering
• /
• v.12 no.1 s.34
• /
• pp.28-40
• /
• 2007

In this paper, we proposes an idea for improved sound characteristic which decreasing a problem in previous reverberation algorism structure. To later reflection sound, proposed new reverberation structure, using a lopped and nested all-pass delay line, and it is designed to improve an natural concert hall sound. In addition, In order to have best imaginary sound effect, we extracted the factors by controlling each delay line's delay time, and we realized a proposed new algorithm by using general-purpose DSP. Through several experimental cases, we observed better effect on improvement of linear flatten and reverberation density and decreasing about colorlessness and non-linear sound at previous proposed model about impulse input.

• Journal of Biomedical Engineering Research
• /
• v.32 no.1
• /
• pp.15-24
• /
• 2011

While Compton imaging is recognized as a valuable 3-D technique in nuclear medicine, reconstructing an image from Compton scattered data has been of a difficult problem due to its computational complexity. The most complex and time-consuming computation in Compton camera reconstruction is to perform the conical projection and backprojection operations. To alleviate the computational burden imposed by these operations, we investigate a rebinning method which can convert conical projections into parallel projections. The use of parallel projections allows to directly apply the existing deterministic reconstruction methods, which have been useful for conventional emission tomography, to Compton camera reconstruction. To convert conical projections into parallel projections, a cone surface is sampled with a number of lines. Each line is projected onto an imaginary plane that is mostly perpendicular to the line. The projection data rebinned in each imaginary plane can then be treated as the standard parallel projection data. To validate the rebinning method, we tested with the representative deterministic algorithms, such as the filtered backprojection method and the algebraic reconstruction technique. Our experimental results indicate that the rebinning method can be useful when the direct application of existing deterministic methods is needed for Compton camera reconstruction.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.04a
• /
• pp.118-125
• /
• 1992

The ground deformation due to the tunnel excavation is dependent on various factors such as ground condition, geometry of the tunnel, excavation method, installation of support members, construction condition of each excavation stage, etc. And the distance from the facing effects significantly the stress conditions of the supported and unsupported ground due to the 3-dimensional structural nature of the excavated tunnel. The concept of ground characteristic line has been applied to properly consider the loading condition given by staged tunnel excavation so that the imaginary supporting pressure is applied against the surface of excavated ground. Discussions on the results of the performed finite element analysis were mainly made with respect to the ground settlement, tunnel displacement, earth pressure, stress mobilized in supporting members.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.48-57
• /
• 2005

A lot of manufacturing knowledge and method have applied to increase manufacturing efficiency in industry field. DES(Discrete Event Simulation) is one of solution to deal with manufacturing problems in factory. Beginning of research, old maintenance system of KNR ( Korea National Railroad) and its technical problems are basically investigated. KNR has maintained railway vehicle with their own solution based on experience. Very advanced railway vehicles such as KTX (Korea Train Express) and TTX(Tilting Train Express) will be difficult to maintain with their old maintenance method. In order to apply knowledge of DES, maintenance field of railway must be considered. Imaginary maintenance machine are selected to variable of DES. Maintenance capability of each machine will be evaluated base on imaginary data from imaginary machine. The machine could be very expensive as well as difficult to replace. Target of research is minimization of number of machine in railway workshop. So basic knowledge of discrete event simulation is introduced. Then five essential stages of discrete event simulation are provided. Each maintenance case defined as event. Each event is discrete and simulated base on different case such as one maintenance line with one machine and one maintenance line with two machines in railway workshop. simple maintenance method, discrete event simulation, will be come out very powerful in complicate maintenance system and will be helpful to reduce maintenance cost as well as maintenance labor.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.2
• /
• pp.121-133
• /
• 2003

This paper presents a fault location algorithm for a single phase-to-ground fault on 3-terminal transmission systems. The method uses only the local end voltage and current signals. Other currents used for the algorithm are estimated by current distribution factors and the local end current. Negative sequence current is used to remove the effect of load current. Five distance equations based on Kirchhoff's voltage law are established for the location algorithm which can be applied to a parallel transmission line having a teed circuit. Separating the real and imaginary parts of each distance equation, final nonlinear equations that are functions of the fault location can be obtained. The Newton-Raphson method is then applied to calculate the estimated fault location. Among the solutions, a correct fault distance is selected by the conditions of the existence of solution. With the results of extensive S/W and H/W simulation tests, it was verified that the proposed algorithm can estimate an accurate fault distance in a 154kV model system.

• International Journal of Costume and Fashion
• /
• v.8 no.2
• /
• pp.50-64
• /
• 2008

The purpose of this study is to classify Avatar fashion style through analysis of on-line Avatar Mall and to propose color pallette and fashion contents from fashion color analysis. The literature research focused on investigating the notion, characters and types of Avatar and relation of Avatar and self-image, clothing image and color image. In data research, 4 on-line portal sites Avatar Malls were analyzed and Avatar fashion style was classified. In addition, Avatar clothing color was analyzed. The research of this study are as follows: Firstly, Avatar in the cyber space represents 'me' of the real states. Avatar fashion helps to represent Avatar Image and clothing makes human image and identity as a social sign. Color helps to constitute clothing impression and human image, therefore clothing and color are the important elements to express self-image through Avatar in the cyber space. Secondly, Avatar Malls of 4 on-line portal sites are very similar and confuse Avatar users because of no standard of fashion style classification. Accordingly, the standard of fashion style classification should be made by a fashion expert, and the specific characters of every on-line portal site should be emphasized. Thirdly, as a result of the analysis of Avatar's clothing, the clothing is divided into a real world clothing and an imaginary world clothing. There are daily clothes, uniform, event clothes, story clothes and fantasy clothes. As a result of the color analysis of Avatar clothing, White, Red, Red Purple colors and bright and vivid tone are generally used for Avatar clothing. This study is significant to classify Avatar fashion style systematically, to notify sensitive and delicate users' sign and to make Avatar fashion image emotional and high-quality.