• 한국인쇄학회지
• /
• 제13권1호
• /
• pp.39-55
• /
• 1995

There has been an enormous emergence of imaging systems dedicated to hardcopy and softcopy color-appearance comparisons. Pre-press industry use the CRT as a soft proofing device to preview and aid with color corrections and changes before producing the final printed image. Color DTP system is required an accurate image-matching between CRT-image and printed image. In other to develop the color DTP,CRT calibration and CRT color transform to CIE color system are necessary. In this paper, we described a method CRT color transform to CIELab color system using RGB image raw data. Experimental results show that described method is useful valid of color image matching.

• 한국광학회지
• /
• 제10권6호
• /
• pp.494-499
• /
• 1999

전기적으로 굴절율 변조값을 조절할 수 있는 부피형 홀로그램 매질(HPDLC)을 제작하였다. HPDLC는 4가 acrylate monomer를 기초로 한 전폴리머(prepolymer)와 액정 혼합물 E7 등으로 구성되어져 있다. 제작된 매질의 광학적 특성을 조사하기 위해 액정 농도, 전기장의 세기에 따른 회전효율을 측정하고, 홀로그래피 방법으로 상을 기록한 후 재생된 상을 전기적으로 조절할 수 있음을 보였다.

• 한국결정성장학회지
• /
• 제3권1호
• /
• pp.85-92
• /
• 1993

커다란 olivine 단결정을 image furnace(floating zone furnace)를 사용하여 산소분압의 조절하에서 성장시켰다. 결정은 투명하였으며 길이가 65mm, 직경이 8mm였다. 산소분압이 감소할 때 결정내 제2상이 증가하여 결정을 엷은 갈색에서 짙은 갈색으로 변화시켰다. 이 제2상은 EPMA결과 Mg가 기저를 이룬 것에 Si와 Fe가 solid solution을 형성한 것이었다.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1566-1574
• /
• 1992

본 연구에서는 원형수직 충돌분류에 의한 가열평판의 전열특성을 해석하기 위 하여 최근 표면온도 측정에 많이 사용되고 있는 liquid crystal을 이용하였다. 즉 liquid crystal의 감온특성과 영상처리 기법을 이용하여 레이놀즈수 및 노즐과 충돌판 사이의 거리(L/D) 변화에 따른 전열면의 온도장 변화를 측정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.100-103
• /
• 2005

Homogeneously aligned nematic liquid crystal modes are representatively the -FFS (fringe-field switching) mode using liquid crystal (-LC) with negative dielectric anisotropy, the +FFS mode and the IPS (in-plane switching) mode using +LC with positive dielectric anisotropy. In view of image quality evaluation standard of LCD, we compared characteristics of the brightness, the contrast ratio (CR) and color shift when the modes have respectively optimized phase retardation values $(d{\Delta}n)$. Consequently, in the most sensitively viewing angle of a man's physical vision, both FFS modes have advantage over the IPS mode from the brightness & the CR point of view. We are also confirmed that the +FFS mode out of them shows the smallest color shift according to all viewing directions in grey levels.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.410-413
• /
• 1988

In this paper, the real-time optical associative memory using multiple hologram which is generated with two angular multiplexed reference beams and Fourier transformed object beam in the $BaTiO_{3}$ crystal based on DFWM mechanism. When one image is recorded in the $BaTiO_{3}$ crystal, complete image can be recalled by 9 % partial input of the stored original image without any additional thresholding and optical feedback process. As an experimental result of multiple Fourier hologram which is recorded with two binary images, OHCHAS and PARKHK, we can obtain complete image recalled by 1/6 partial input of the stored image.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권7호
• /
• pp.313-318
• /
• 2006

An automatic sample centering system is underway at the protein crystallography beam line of the Pohang Light Source to improve the efficiency of the crystal screening process. A sample pin which contains a protein crystal is mounted on a goniometer head. Then the crystal should be moved to the center of X-ray beam by controlling the motorized goniometer to obtain diffraction data. Since the X-ray beam is located at the center of the image obtained from the CCD camera when the image of the sample pin is in focus, an auto-focusing algorithm is a very important part in the auto-sample-centering system. However the results of applying several well-known auto focusing algorithms directly to the images are not satisfactory owing to the following factors: misalignment of CCD camera, non-uniform cryo-stream in the background of the image and the supporter of the loop. The performance of an auto-focusing algorithm can be increased if the algorithm is applied to only the loop region identified. Non-uniform cryo-stream and a various illumination condition and a stain, which is shown in the image, are main obstacles to loop region identification. In this paper, a simple loop region identification algorithm, which can solve these problems, is proposed and the effective ness of the proposed scheme is shown by applying the auto-focusing algorithm to the loop region identified.

• 대한전자공학회논문지
• /
• 제25권7호
• /
• pp.844-850
• /
• 1988

In this paper, the implementation of optical parallel boolean logic gates using two Liquid Crystal TVs is described. Based on theory of polarization modulation, two Liquid Crystal TVs are arranged in tandem and parallel to perform optical logic operations. Experimental results of binary image using two Liquid Crystal TVs are presented.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.142-145
• /
• 2001

The residual DC phenomena in the in-plane switching(IPS)-liquid crystal display(LCD) by the voltage-transmittance (V-T) and capacitance-voltage (C-V) hysteresis method on rubbed polyimide (PI) surfaces were studied. We found that the residual DC voltage in the IPS-LCD was decreasing with the increasing concentration of cyano LCs. The residual DC voltage of the IPS-LCD can be improved by the high polarity of cyano LCs.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.45-49
• /
• 2014

Well-crystallized $BaSi_2O_5:Eu^{2+}$ phosphor films were synthesized by heat treatment of spin-coated BaO:Eu on $SiO_2$ glass. We investigated luminescence-structure properties of these phosphor films as a function of heat-treatment temperature. From x-ray diffraction patterns, our $BaSi_2O_5:Eu^{2+}$ phosphor films revealed that (111)- and (204)-crystal planes of $BaSi_2O_5$ crystal were dominantly increased with an increase of heat-treatment temperature. Photoluminescence intensities of $BaSi_2O_5:Eu^{2+}$ phosphor films were increased with amount of these crystal planes. It can be explained that $Eu^{2+}$ ions were stably occupied at specific crystal orientation of $BaSi_2O_5$ crystal, enhancing the luminescent intensities of $BaSi_2O_5:Eu^{2+}$ phosphor films. In addition, our $BaSi_2O_5:Eu^{2+}$ phosphor films had transmittance of 70% at 510 nm,.due to the dense morphology and specific crystallinity of $BaSi_2O_5:Eu^{2+}$ phosphor films.