• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.331-339
• /
• 2015

The purpose of this study is to evaluate utility of rotating adjustment using Xsight spine tracking system in 3D DOF location adjusting method, to minimize error between 6D DOF and 3D DOF in fiducial tracking system. In this study, the result of 6D DOF target location error is $0.124{\pm}0.058mm$, using fiducial inside tumor 3D DOF $0.673{\pm}0.142mm$, outside tumor $1.126{\pm}0.253mm$, apply with Xsight spine tracking system 3D DOF $0.542{\pm}0.103mm$. As the experiment shows, it was demonstrated that rotating adjustment through Xsight spine tracking system is valuable in case of treatment in 3D DOF location error that makes increasing accuracy and dose distribution each approximately 48% and 3%. In accordance with result of this study is useful rotation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.353-364
• /
• 2002

In this paper, a new onto-digital stereo object-tracking system using hierarchical digital algorithms and optical BPEJTC is proposed. This proposed system can adaptively track a moving target by controlling the convergence of stereo camera. firstly, the target is detected through the background matching of the sequential input images by using optical BPEJTC and then the target area is segmented by using the target projection mask which is composed by hierarchical digital processing of image subtraction, logical operation and morphological filtering. Secondly, the location's coordinate of the moving target object for each of the sequential input frames can be extracted through carrying out optical BPEJTC between the reference image of the target region mask and the stereo input image. Finally, the convergence and pan/tilt of stereo camera can be sequentially controlled by using these target coordinate values and the target can be kept in tracking. Also, a possibility of real-time implementation of the adaptive stereo object tracking system is suggested through optically implementing the proposed target extraction and convergence control algorithms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.580-585
• /
• 2010

In this paper, The object Tracking System is designed by SOPC based Nios II embedded processor and C2H compiler. And this system using single PTZ camera can effectively control IPs in the platform of SOPC based Nios II Embedded Processor and creating IP by C2H(C-To-Hardware) compiler for image-in/output, image-processing and devices of communication that can supply various monitoring information to network or serial. Accordingly, Special quality and processing speed of object tracking using high-quality algorism in the system is improved by hardware/software programming methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1458-1463
• /
• 2004

Tracking is one of the most important pre-required task for many application such as human-computer interaction through gesture and face recognition, motion analysis, visual servoing, augment reality, industrial assembly and robot obstacle avoidance. Recently, 3D information of object is required in realtime for many aforementioned applications. 3D tracking is difficult problem to solve because during the image formation process of the camera, explicit 3D information about objects in the scene is lost. Recently, many vision system use stereo camera especially for 3D tracking. The 3D feature based tracking(3DFBT) which is on of the 3D tracking system using stereo vision have many advantage compare to other tracking methods. If we assumed the correspondence problem which is one of the subproblem of 3DFBT is solved, the accuracy of tracking depends on the accuracy of camera calibration. However, The existing calibration method based on accurate camera model so that modelling error and weakness to lens distortion are embedded. Therefore, this thesis proposes 3D feature based tracking method using SVM which is used to solve reconstruction problem.

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.907-914
• /
• 2007

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.742-745
• /
• 2009

This paper proposes a wireless LAN antenna system that tracks an object automatically by using image-based tracking. The proposed system consists of a camera and a pan-tilt unit in addition to a directional wireless LAN antenna. The camera and the directional antenna are set in same direction and they are set on the pan-tilt unit. A target object which has a wireless LAN receiver is tracked by using images captured by the camera. And the directional antenna faces in same direction as the camera by the pan-tilt unit. Therefore, the directional antenna keeps pointing the receiver, and a transmitting efficiency is improved. A result of a fundamental experiment shows that a receiver attached to a flying airship was tracked by a prototype of the proposed antenna system. The airship flied about, and the proposed antenna system was set on a roof of a building. The experimental result indicates an effectiveness of the proposed system compared to the conventional directional LAN antenna.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.257-259
• /
• 1996

This paper presents the active eye system for tracking a moving object in 3D space. A prototype system able to track a moving object is designed and implemented. The mechanical system ables the control of platform that consists of binocular camera and also the control of the vergence angle of each camera by step motor. Each camera has two degrees of freedom. The image features of the object are extracted from complicated environment by using zero disparity filtering(ZDF). From the cnetroid of the image features the gaze point on object is calculated and the vergence angle of each camera is controlled by step motor. The Proposed method is implemented on the prototype with robust and fast calculation time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.140-146
• /
• 2007

This paper demonstrates the development of a mobile robot for patrol. We fuse differential GPS, angle sensor and odometry data using the framework of extended Kalman filter to localize a mobile robot in outdoor environments. An important feature of road environment is the existence of curbs. So, we also propose an algorithm to find out the position of curbs from laser range finder data using Hough transform. The mobile robot builds the map of the curbs of roads and the map is used fur tracking and localization. The patrol robot system consists of a mobile robot and a control station. The mobile robot sends the image data from a camera to the control station. The remote control station receives and displays the image data. Also, the patrol robot system can be used in two modes, teleoperated or autonomous. In teleoperated mode, the teleoperator commands the mobile robot based on the image data. On the other hand, in autonomous mode, the mobile robot has to autonomously track the predefined waypoints. So, we have designed a path tracking controller to track the path. We have been able to confirm that the proposed algorithms show proper performances in outdoor environment through experiments in the road.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.499-503
• /
• 2004

This application-oriented paper describes an automated welding carriage system to weld a thin corrugated workpiece with welding seam tracking function. Hyundai Heavy Industries Corporation has developed an automatic welding carriage system, which utilizes pulsed plasma arc welding process for corrugated sheets. It can obtain high speed welding more than 2 times faster than traditional TIG based welding system. The aim of this development is to increase the productivity by using automatic plasma welding carriage systems, to track weld seam line using vision sensor automatically, and finally to provide a convenience to operator in order to carry out welding. In this paper a robust image processing and a distance based tracking algorithms are introduced for corrugated workpiece welding. The automatic welding carriage system is controlled by the programmable logic controller(PLC), and the automatic welding seam tracking system is controlled by the industrial personal computer(IPC) equipped with embedded OS. The system was tested at actual workpiece to show the feasibility and performance of proposed algorithm and to confirm the reliability of developed controller.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.2
• /
• pp.28-34
• /
• 1998

In this paper, I'd like to make a suggestion for boundary line detect algorithm which is used 3-D image processing system in order to track moving object. Through this study, more than anything else, difference image method was adopted to detect moving object in input image. To detect moving object, I made use of detect windows constructed by 4's predictive areas and object area for the purpose of reducing processing time and its size was determined by the size of moving object and prediction parameter directed center position. And also, tracking camera was movable toward the direction of X, Y by DC motor. As a conclusion of the study proposed algorithm, I found out the following results that tracking error was less than 6% of total moving object size and maximum tracking time 2 seconds by toy-car simulation.