• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2009

We report the template-based synthesis of well-dispersed CdS nanoparticles (NPs) in the interior of poly (2-acetamidoacrylic acid) (PAAA) hydrogel as a novel type of nanocomposite without particle aggregation via ion exchange in a aqueous system. As revealed by the TEM image analysis, the mean crystallite diameter of CdS NPs embedded in hydrogel composite was 4.5 nm, and the composite did not suffer any observable change after 6 months. Desorption/decomposition of CdS/PAAA hydrogel composite was studied by evolved gas analysis-gas chromatography-mass spectrometry (EGA-GC-MS), and thermogravimetric analysis (TGA) methods. From the TGA data, the thermal stability of the composite system increased by ca. 100 $^\circ$C and the content of CdS NPs in a dry composite gel was over 70 wt%. In addition, the chemical pathway was proposed for the entire decomposition process.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.815-821
• /
• 2005

Three major commercially available organic chemical admixtures are modified lignosulfonates (LS), sulfonated naphthalene-formaldehyde resins (SNF) and sulfonated melamine-formaldehyde (SMF). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps including hydroxymethylation (Step 1), sulfonation (Step 2), polymerization (Step 3) and neutralization and stabilization (Step 4). In this synthesis, mole ratio of melamine to formaline and the amount of acid catalyst used were varied. The obtained SMF superplasticizers were applied to cement paste and mortar and their physical properties including workability, slump loss, compressive strength were investigated. Also their hydrate shapes were investigated by examining SEM images of the cured paste. It was found that the fluidity properties of cement were significantly influenced by the structure of SMF condensates.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.93-99
• /
• 2015

In this paper, we propose a gaze correction method for realistic video teleconferencing. Typically, cameras used in teleconferencing are installed at the side of the display monitor, but not in the center of the monitor. This system makes it too difficult for users to contact each eyes. Therefore, eys contact is the most important in the immersive videoconferencing. In the proposed method, we use the stereo camera and the depth camera to correct the eye contact. The depth camera is the kinect camera, which is the relatively cheap price, and estimate the depth information efficiently. However, the kinect camera has some inherent disadvantages. Therefore, we fuse the kinect camera with stereo camera to compensate the disadvantages of the kinect camera. Consecutively, for the gaze-corrected image, view synthesis is performed by 3D warping according to the depth information. Experimental results verify that the proposed system is effective in generating natural gaze-corrected images.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.401-407
• /
• 2022

Recently, image processing technology for autonomous driving by recognizing objects and lanes through camera images to realize autonomous vehicles is being studied. Haze reduces the visibility of images captured by the camera and causes malfunctions of autonomous vehicles. To solve this, it is necessary to apply the haze removal function that can be processed in real time to the camera. Therefore, in this paper, the fog removal method of Sim with excellent performance is implemented with hardware capable of real-time processing. The proposed hardware was designed using Verilog HDL, and FPGA was implemented by setting Xilinx's xc7z045-2ffg900 as the target device. As a result of logic synthesis using Xilinx Vivado program, it has a maximum operating frequency of 276.932MHz and a maximum processing speed of 31.279fps in a 4K (4096×2160) high-resolution environment, thus satisfying the real-time processing standard.

• Advances in nano research
• /
• v.10 no.5
• /
• pp.461-470
• /
• 2021

Infection is one of the major mortality causes throughout the globe. Nuclear medicine plays an important role in diagnosis of deep infections such as osteomyelitis, arthritis infection, heart valve and heart prosthesis infections. Techniques such as labeled leukocytes are sensitive and selective for tracking the inflammations but they are not suitable for differentiating infection from inflammation. Anionic linear-globular dendrimer-G₂ was synthesized then conjugation to gemifloxacin antibiotic. The structures were identified by FT-IR, ¹H-NMR, C-NMR, LC-MS and DLS. The toxicity of gemifloxacin and dendrimer-gemifloxacin complex was compared by MTT test. Dendrimer-G₂-gemifloxacin was labeled by Technetium-99m and its in-vitro stability and radiochemical purity were investigated. In-vivo biodistribution and SPECT imaging were studied in a rabbit model. Identify and verify the structure of the each object was confirmed by FT-IR, ¹H-NMR, C-NMR and LC-MS, also, the size and charge of this compound were 128 nm and -3/68 mv respectively. MTT test showed less toxicity of the dendrimer-G₂-gemifloxacin than free gemifluxacin (P < 0.001). Radiochemical yield was > %98. Human serum stability was 84% up to 24 h. Biodistribution study at 50 min, 24 and 48 h showed that the complex is significantly absorbed by the intestine and accumulation in the lungs and affects them, finally excreted through the kidneys, biodistribution results are consistent with results from full image means of SPECT/CT technique.

• Journal of Powder Materials
• /
• v.29 no.1
• /
• pp.22-27
• /
• 2022

Conventionally, metal materials are produced by subtractive manufacturing followed by melting. However, there has been an increasing interest in additive manufacturing, especially metal 3D printing technology, which is relatively inexpensive because of the absence of complicated processing steps. In this study, we focus on the effect of varying powder size on the synthesis quality, and suggest optimum process conditions for the preparation of AlCrFeNi high-entropy alloy powder. The SEM image of the as-fabricated specimens show countless, fine, as-synthesized powders. Furthermore, we have examined the phase and microstructure before and after 3D printing, and found that there are no noticeable changes in the phase or microstructure. However, it was determined that the larger the powder size, the better the Vickers hardness of the material. This study sheds light on the optimization of process conditions in the metal 3D printing field.

• Archives of Craniofacial Surgery
• /
• v.24 no.4
• /
• pp.167-173
• /
• 2023

Background: Mandibular split fractures, in which the fracture occurs exclusively in the posterior wall, are uncommon. This study aimed to enhance clinicians' understanding of mandibular split fractures and offer insights for future research. Methods: This study included six patients who visited our hospital between January 2020 and June 2023 and were diagnosed with mandibular split fractures. We retrospectively collected data from patients' medical records on their age, sex, symptoms, mechanism, impact site, associated injuries, and treatment method, as well as the location, pattern, and number of fractures observed on computed tomography (CT) and panoramic images. The frequency of split fractures among all mandibular fractures was calculated. Results: The six patients included three men (50%) and three women (50%), ranging in age from 20 to 71 years (mean age, 49.8 years). The split fractures were located in the symphysis in one patient (16.7%), symphysis to parasymphysis in two patients (33.3%), parasymphysis in one patient (16.7%), and parasymphysis to the body in two patients (33.3%). Four patients (66.7%) had condylar head fractures, while two patients (33.3%) had single split fractures. The mechanism of trauma was a slip-down incident in four cases (66.7%), while two cases (33.3%) were caused by motorcycle traffic accidents. Four patients (67%) underwent intermaxillary fixation, while two patients (33%) improved with conservative treatment. Split fractures were diagnosed in all six patients on CT, whereas the fracture line was not clearly visible on panoramic images. Mandibular split fractures accounted for 5.6% of all mandibular fractures. Conclusion: This study provides insights into the clinical characteristics of rare mandibular split fractures and the diagnostic imaging findings. Furthermore, CT scans and three-dimensional image synthesis-instead of panoramic images-may be essential for accurately diagnosing mandibular fractures, including mandibular split fractures, in the future.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.6 no.2
• /
• pp.61-68
• /
• 2020

Aggregated neurofibrillary tangles (NFTs) are a pathological hallmark in Alzheimer's disease (AD) and many radiopharmaceuticals targeting NFTs have been developed so far. Among these, [¹⁸F]flortaucipir (TAUVID^TM) is the first approved radiopharmaceutical in the Food and Drug Administration (FDA) to image tau pathology. In the present study, we describe the optimized radiosynthetic method for the routine production of [¹⁸F] flortaucipir using a commercialized automation module (i.e. GE TRACERlab^TM FX_FN pro). [¹⁸F]Flortaucipir was prepared by nucleophilic substitution from its N-tert-butoxycarbonyl protected nitro precursor, tertbutyl 7-(6-nitropyridin-3-yl)-5H-pyrido[4,3-b]indole-5-carboxylate, at 130℃ for 10 min in dimethyl sulfoxide. The mean radiochemical yield was 20 ± 4.3% (decay-corrected, n = 47) with the molar activity of 218 ± 32 GBq/µmol at the end of synthesis. The radiochemical purity was determined to be above 95%. The overall production time including quality control is approximately 100min. The final produced [¹⁸F]flortaucipir injection meets the USP criteria for quality control. Thus, this fully automated system is validated for clinical use.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.474-476
• /
• 2021

Glioblastoma is the most common brain malignancies arising from glial cells. Early diagnosis and treatment plan establishment are important, and cancer is diagnosed mainly through T1CE imaging through injection of a contrast agent. However, the risk of injection of gadolinium-based contrast agents is increasing recently. Region segmentation that marks cancer regions in medical images plays a key role in CAD systems, and deep neural network models for synthesizing new images are also being studied. In this study, we propose a model that simultaneously learns the generation of T1CE images and segmentation of cancer regions. The performance of the proposed model is evaluated using similarity measurements including mean square error and peak signal-to-noise ratio, and shows average result values of 21 and 39 dB.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.51.1-51.1
• /
• 2019

At the commissioning phase of KVN from 2009 to 2013, single-dish survey and monitoring observations were performed toward about 1000 evolved stars and about 60 relatively strong SiO and H2O maser sources respectively. Based on these single-dish results and VLBI feasibility test observations at K/Q/W/D bands in 2014, KVN Key Science Project (KSP) has started from 2015 and will be completed in 2019 as KSP phase I. Here we present the overview of observational studies on evolved stars using KVN. In KSP phase I, we have focused on nine KSP sources which show a successful astrometrically registered maps of SiO and H2O masers using the source frequency phase referencing method. We aim at investigating the spatial structure and dynamical effect from 43/42/86/129 GHz SiO to 22 GHz H2O maser regions associated with a stellar pulsation and development of asymmetry in circumstellar envelopes. Using the combined network KaVA (KVN+Japanese VLBI network VERA), KaVA Large Program titled on "Expanded Study on Stellar Masers: ESTEMA Phase I" was performed from 2015 to 2016. Based on ESTEMA Phase I, EAVN Large Program titled on "EAVN Synthesis of Stellar Maser Animations: ESTEMA Phase II" was also performed from 2018. The ESTEMA II project aims to publish composite animations of circumstellar H2O and SiO masers, which taken from up to 6 long-period variable stars with a variety of the pulsation periods (333-1000 days). The animations will exhibit the three-dimensional kinematics of the maser gas clumps with complexity caused by stellar pulsation-driven shock waves and anisotropy of clump ejections from the stellar surface. Adding three EAVN telescopes (Tianma 65m, Nanshan 26m and NRO 45m telescopes) with KaVA always secures the high quality of the maser image frames through the monitoring program.