• 한국컴퓨터정보학회논문지
• /
• 제13권6호
• /
• pp.87-94
• /
• 2008

홍채진단은 홍채의 패턴, 색, 기타 다른 특징들을 조사하여 환자의 병을 진단하는 대체의학이다. 그러나 기존의 연구는 흑백 홍채영상을 이용하여 홍채 내의 특정 패턴을 검출하는 알고리즘 연구로 홍채의 칼라 정보로부터 건강상태를 체크하는 진단시스템으로 사용하기에는 부족하다. 본 논문에서는 칼라 홍채영상과 의료정보 데이터베이스를 이용하는 홍채진단시스템을 개발하였다. 개발한 시스템은 홍채카메라는 갖는 입력모듈, 홍채병소징후 검출 모듈, 의료정보 데이터베이스, 출력 모듈 등 4가지 모듈로 되어있다. 칼라 홍채영상으로부터 7가지 주요 홍채병소징후를 추출하고 검진의 정확도를 위해 병소 수동 편집 기능을 제공한다. 병소를 분석하는 단계에서는 홍채학에 기반한 의료정보와 개인 이력 관리 모듈을 이용한다. 제안한 시스템은 기존 시스템의 비해 다양한 기능이 추가되어 홍채진단 시스템으로 활용 가능하다.

• 한국통신학회논문지
• /
• 제1권1호
• /
• pp.23-31
• /
• 1976

VHF 및 UHF 챠넬의 TV 信號는 映像 및 音聲을 포함한 6MHz의 대역폭으로 챠넬變換 된후 直線增幅器를 통해 재 送信될 때 搬送波付近의 兩側波帶傳送領域에서 出力振幅周波數特性에 不自然스러운 變化가 생겨 화질에 影響을 주는수가 있다. 이러한 現像은 發振器로 부터의 不要信號로 因한 不要下側帶波의 發生등 問題가 되는 要因인 트랜지스터 直線增幅器의 非直線性, MIXER 회로에서의 상호변조 歪 AM-PM 變換 및 envelope delay 特性 등을 고려하여 出力特性을 구한 결과 主原因은 非直線性에 의한 것이였으며 實驗結果로서는 非直線性의 主因으로 Bias 조건의 불합리 및 發振器로 부터의 不要周波數의 發生이 가장 큰 原因으로 나타났다. 특히 인접信號에 對한 相互變調歪 및 不要信號發生은 Up conversion의 경우가 Down Conversion의 경우보다 현저히 감소됨을 확인하였고 發振器로부터의 spurious가 system에 영향을 주지 않는 方案을 모색하였다.

• 한국방사선학회논문지
• /
• 제4권3호
• /
• pp.5-11
• /
• 2010

본 논문에서는 이중 에너지 디지털 래디오그래피를 위한 이중 모드 검출기 개발을 제안한다. 이중 에너지 래디오그래피 모듈의 설계를 위하여 상용 BIS(Baggage Inspection System)에서 사용되고 있는 X-선 발생장치의 스펙트럼과 이중 모드 검출기에 대한 특징 및 방사선적 특성을 분석하였다. 제안하는 영상 검출기 모듈은 BIS에서 활용되고 있는 X-선관을 대상으로 X-선 스펙트럼을 모사하고, 모사한 스펙트럼을 통하여 새롭게 제안하는 검출기 모듈의 방사선적 특성을 고찰하였다. X-ray를 이용한 실험에서 구리 필터의 두께 증가에 따라 저에너지 검출기(LED)와 고에너지 검출기(HED)의 출력신호의 차이는 같이 증가하였다. 특히 HED에서의 출력신호의 크기는 구리 필터 두께가 증가 할수록 감소함을 알 수 있었다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권3호
• /
• pp.238-244
• /
• 2012

A modeling of vision based robot formation control system using fuzzy logic controller and extended Kalman filter is presented in this paper. The main problems affecting formation controls using fuzzy logic controller and vision based robots are: a robot's position in a formation need to be maintained, how to develop the membership function in order to obtain the optimal fuzzy system control that has the ability to do the formation control and the noise coming from camera process changes the position of references view. In order to handle these problems, we propose a fuzzy logic controller system equipped with a dynamic output membership function that controls the speed of the robot wheels to handle the maintenance position in formation. The output membership function changes over time based on changes in input at time t-1 to t. The noises appearing in image processing change the virtual target point positions are handled by Extended Kalman filter. The virtual target positions are established in order to define the formations. The virtual target point positions can be changed at any time in accordance with the desired formation. These algorithms have been validated through simulation. The simulations confirm that the follower robots reach their target point in a short time and are able to maintain their position in the formation although the noises change the target point positions.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.20-24
• /
• 1997

We have successfully fabricated high power (~20W) laser diode array, which are useful for pumping Nd:YAG lasers. The laser diode aray has 20 100.mu.m-wide cahnnels of which space was adjusted to 350.mu.m to improve thermal characteristics. And channel width is 100.mu.m. For an uncoated LD array, the output power of 15.66W has been obtained at 41A under quasi-CW operation, which results in about 0.42W/A slope efficiency. After aR(5%) and HR (95%) coatings on both facets, the output power was improved up to 21.18W at 40A under the same operation as above and the slope efficiency was 0.795W/A. On the other hand, by using a near field measurement system consisting of objective lens, eyepiece, CCD camera and image processing board, the typical near field patten of 1*20 LD array was observed.

• Journal of Information Processing Systems
• /
• 제17권2호
• /
• pp.411-425
• /
• 2021

In this paper, a vehicle recognition algorithm based on deep convolutional neural network and compression dictionary is proposed. Firstly, the network structure of fine vehicle recognition based on convolutional neural network is introduced. Then, a vehicle recognition system based on multi-scale pyramid convolutional neural network is constructed. The contribution of different networks to the recognition results is adjusted by the adaptive fusion method that adjusts the network according to the recognition accuracy of a single network. The proportion of output in the network output of the entire multiscale network. Then, the compressed dictionary learning and the data dimension reduction are carried out using the effective block structure method combined with very sparse random projection matrix, which solves the computational complexity caused by high-dimensional features and shortens the dictionary learning time. Finally, the sparse representation classification method is used to realize vehicle type recognition. The experimental results show that the detection effect of the proposed algorithm is stable in sunny, cloudy and rainy weather, and it has strong adaptability to typical application scenarios such as occlusion and blurring, with an average recognition rate of more than 95%.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.637-640
• /
• 2005

In the development of a electronic system for a optical payload comprising mainly EOS(Electro-Optical Sub-system) and PDTS(Payload Data Transmission Sub-system), many aspects should be investigated and discussed for the easy implementation, for th e higher reliability of operation and for the effective ness in cost, size and weight as well as for the secure interface with components of a satellite bus, etc. As important aspects the interfaces between a satellite bus and a payload, and some design features of the CEU(Camera Electronics Unit) inside the payload are described in this paper. Interfaces between a satellite bus and a payload depend considerably on whether t he payload carries the PMU(Payload Management Un it), which functions as main controller of the Payload, or not. With the PMU inside the payload, EOS and PDTS control is performed through the PMU keep ing the least interfaces of control signals and primary power lines, while the EOS and PDTS control is performed directly by the satellite bus components using relatively many control signals when no PMU exists inside the payload. For the CEU design the output channel configurations of panchromatic and multi-spectral bands including the video image data inter face between EOS and PDTS are described conceptually. The timing information control which is also important and necessary to interpret the received image data is described.

• 한국산학기술학회논문지
• /
• 제1권2호
• /
• pp.27-31
• /
• 2000

대상 물체의 온도분포를 해석하고 계측하기 위해 열상 장비가 구현된다. 시스템의 주요한 부분은 초점면 배열 형태의 센서가 적용된 열상 카메라이다. 적용된 열상 센서는 중파장 적외선 영역의 신호를 검출하며 열상을 형성하기 위한 기본 신호를 출력한다. DSP가 활용되어 센서 신호처리를 통해 열상을 구성하고 NTSC 신호 및 디지털 신호 출력을 한다. 열상의 화질을 개선하기 위해 이점 교정법을 적용한다. 이는 낮은 온도와 높은 온도를 기준으로 하여 초점면 배열 센서 화소 신호의 공간적인 비균일함을 교정하는 것으로서 실험 결과를 통해 열상의 화질이 개선됨을 보인다.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.86-94
• /
• 2016

In this paper, position control of focal plane compensation device using piezoelectric actuator is conducted. The forcal plane compensation device installed on earth observation satellite camera compensates micro-vibration from reaction wheels. In this study, four experimental models of the open-loop compensation device are derived using MATLAB system identification toolbox in the input range of 0~50Hz. Subsequently, the PID controller for each model is designed and the performance test of each controller is conducted through MATLAB/Simulink. According to frequency response analysis of the closed-loop compensation device system, the PID controller designed for 38~50Hz input range has enough tracking performance for the whole 0~50Hz input range. The maximum output error is about $1{\mu}m$ for the input range. The simulation results has been verified by the experimental method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.823-825
• /
• 2003

A sensor system was designed to measure real time vibro displacement of civil structure. The He-Ne laser is used for the displacement measuring method, because it guarantees short time stabilization, long time output power stability. Also, it guarantees simple maintenances and repairs under actual using condition. The line CCD image sensor(Tcd-142d) is used to detect the displacement of Ne-Ne laser responding to the vibro of civil structure. For accurate measurement and comparison, CDP-50 is used. Usually CDF-50 (Strain type displacement device) is used for the standard correction device of optical measurement equipments. The data processing part is consists of Optical sensor part, Wireless data transmission device, DAQp-1200, and LapView program. The displacement data of vibro from optical sensor part inputted to wireless data transmission device and then transmitted to DAQp-1200 in main control room. DAQp-1200 performs A/D conversion for the receiving data. After that the converted data inputted to computer system using LapView program for user display. The significance of this paper is to develope a convenient, accurate and lost saving real time displacement measurement system for the civil structure.