• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.443-449
• /
• 2021

In this study, the purpose is to present the foot inclination angle for realizing an image similar to that of the existing examination method and to present the clinical usefulness of the new examination method through comparison between the existing examination method and the newly designed standing foot oblique projection. A foot phantom was used, and the magnification of the image according to the angle was quantitatively evaluated by attaching a nut to the position of the cuboid of the phantom. The internal oblique image acquired using a 30° wedge was set as the standard image. And that image was compared with the images acquired by changing the angle of the foot from 20° to 65° at intervals of 5°. Image evaluation was performed by 3 radiological technologists, and qualitative evaluation using a Likert 5-point scale for evaluation items of true oblique view and quantitative evaluation of the value obtained by measuring the diameter of a nut in each image were performed as image evaluation. For data analysis, reliability analysis between the measure and comparative analysis of the average value for each angle were performed. The qualitative evaluation score for each image was 4.5 to 5 points for most questions in the case of the standard image. And 4 points or less for most questions in the images with a foot angle of 45° or less, and an evaluation score close to the standard image was obtained in the image of 50° or more. And in the quantitative evaluation, the diameter of the nut was measured to be 9.28~9.56 mm. The qualitative evaluation showed a reliability of 0.95~1.0 and the quantitative evaluation was 0.62. As a result of comparing and analyzing the average of the quantitative and qualitative average values for each angle image, the group with the average value most similar to the standard image was images obtained at 55° and 60°, and in the post-analysis, the images of both groups were the same group as the standard image(p<0.01). As a result of this study, it was found that the angle of inclination of the foot for realizing the image most similar to the existing image in the standing foot oblique projection is 55°~60°. In addition, if this test method is applied to the clinic, it is believed that it will help prevent safety accidents such as falls during the test and improve test efficiency by minimizing the movement of patients for the test.

• Korean Journal of Mathematics
• /
• v.14 no.1
• /
• pp.47-55
• /
• 2006

This paper presents an image analysis technique using connected components by applying SPA (shortest path algorithm) from graph theory. Software implementation of Floyd-Warshall transitive matrix labelling method is discussed. Results are also presented.

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.831-842
• /
• 1999

We propose a wavelet decomposition feature extraction method for the hand-written character recognition. Comparing the recognition rates of which methods with original image features and with selected features by the wavelet decomposition we study the characteristics of the proposed method. LDA(Linear Discriminant Analysis) QDA(Quadratic Discriminant Analysis) RDA(Regularized Discriminant Analysis) and NN(Neural network) are used for the calculation of recognition rates. 6000 hand-written numerals from CENPARMI at Concordia University are used for the experiment. We found that the set of significantly selected wavelet decomposed features generates higher recognition rate than the original image features.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1787-1793
• /
• 2018

Shadow is a common phenomenon observed in natural scenes, but it has a negative influence on image analysis such as object recognition, feature detection and scene analysis. Therefore, the process of detecting and removing shadows included in digital images must be considered as a pre-processing process of image analysis. In this paper, the existing methods for acquiring 1D invariant images, one of the feature elements for detecting and removing shadows contained in a single natural image, are described, and a method for obtaining 1D invariant images based on linear regression has been proposed. The proposed method calculates the log of the band-ratio between each channel of the RGB color image, and obtains the grayscale image line by linear regression. The final 1D invariant images were obtained by projecting the log image of the band-ratio onto the estimated grayscale image line. Experimental results show that the proposed method has lower computational complexity than the existing projection method using entropy minimization, and shadow detection and removal based on 1D invariant images are performed effectively.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.2
• /
• pp.19-26
• /
• 2004

This paper proposes ACA (Adaptive Component Analysis) as a method for feature extraction and analysis of the content-based image retrieval system. For satisfactory retrieval, the features extracted from images should be appropriately applied according to the image domains and for this, retrieval measurement is proposed in this study. Retrieval measurement is a standard indicating how important the value of a relevant feature is to image retrieval. ACA is a middle stage for content-based image retrieval and it purposes to improve the retrieval speed and performance.

• KSCI Review
• /
• v.12 no.1
• /
• pp.9-19
• /
• 2004

This paper proposes ACA (Adaptive Component Analysis) as a method for feature extraction and analysis of the content-based image retrieval system. For satisfactory retrieval, the features extracted from images should be appropriately applied according to the image domains and for this. retrieval measurement is Proposed in this study. Retrieval measurement is a standard indicating how important the value of a relevant feature is to image retrieval ACA is a middle stage for content-based image retrieval and it purposes to improve the retrieval speed and performance.

• Journal of KIISE
• /
• v.43 no.7
• /
• pp.812-819
• /
• 2016

This paper introduces and analyzes the theoretical basis and method of the conventional initial-value assignment problem and feasibility of image segmentation. The paper presents topological evidence and a method of appropriate initial-value assignment based on topology theory. Subsequently, the paper shows minimum conditions for feasibility of image segmentation based on separation axiom theory of topology and a validation method of effectiveness for image modeling. As a summary, this paper shows image segmentation with its mathematical validity based on topological analysis rather than statistical analysis. Finally, the paper applies the theory and methods to conventional Gaussian random field model and examines effectiveness of GRF modeling.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.621-628
• /
• 2021

Prior studies on frequency-related image quality analysis of intravascular ultrasound catheters are lacking both in Korea and abroad. Therefore, this study was conducted to prepare a standard for measuring the image quality using the program and to suggest a measuring method to researchers related to the quality analysis of intravascular ultrasound images. For the target, the vessel lumen size is 3.0 - 4.0 mm. Before using intravascular ultrasound, thoroughly clean the ultrasound catheter so that no air or foreign substances enter it. Normal vascular images and lesion vascular images of sufficiently dilated images were used. As a standard image acquisition method, the image of the end-systolic section, which has the best evaluation of vascular lesions when using intravascular ultrasound, was acquired retrospectively through the DCAS PACS program to set the standard. When setting the measurement method criteria, we proposed a standard setting method that corresponds to the concentric and eccentric circles of normal and lesion vessels. By applying this criterion, we proposed a method for measuring the lumen and lateral cavities of normal and lesion vessels of interest and background area. In conclusion, if the image quality of intravascular ultrasonography is measured through the method devised by these researchers, consistent quality measurement is possible regardless of the type of intravascular ultrasound catheter. Therefore, it is thought that it can be applied as a guideline for the actual image quality measurement method in the study related to intravascular ultrasound image quality.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.572-576
• /
• 1997

X-ray laminography and DT(digital tomosynthesis) that can form a cross-sectional image of 3-D objects promise to be good solutions for inspecting interior defects of industrial products. The major factors of the digital tomosynthesis that influence on the quality of x-ray cross-sectional images are also discussed. The quality of images acquired from the DT system varies according to image synthesizing methods, the number of images used in image synthesizing, and X-ray projection angles. In this paper, a new image synthesizing method named 'log-root method' is proposed to get clear and accurate cross-sectional images, which can reduce both artifact and blurring generated by materials out of focal plane. To evaluate the quality of cross-sectional images, two evaluating criteria: (1) shape accuracy and (2) clearness in the cross-sectional image are defined. Based on this criteria, a series of simulations were performed, and the results show the superiority of the new synthesizing method over the existing ones such as averaging and minimum method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.8
• /
• pp.87-98
• /
• 1994

Object-oriented analysis-synthesis coding subdivides each image of a sequence into moving objects and compensates the motion of each object. Thus it can reconstruct real motion better than conventional motion-compensated coding techniques at very-low-bit-rates. It uses a mapping parameter technique for estimating motion information of each object. Since a mapping parameter technique uses gradient operators it is sensitive to redundant details and noise. To accurately determine mapping parameters, we propose a new analysis method using integral projections for estimation of gradient values. Also to reconstruct correctly the local motion the proposed algorithm divides an image into segmented objects each of which having uniform motion information while the conventional one assumes a large object having the same motion information. Computer simulation results with several test sequences show that the proposed image analysis method in object-oriented analysis-synthesis coding shows better performance than the conventional one.