• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.202-205
• /
• 2008

건물이 밀집된 도심지역을 촬영한 두 시기 항공영상에 화소기반 변화탐지 기법인 영상대차(Image Differencing), 영상중첩 분석(Image Overlay)기법을 적용하여 넓은 대도심지역의 효율적인 변화탐지 가능성을 살펴보았다. 영상대차(Image Differencing) 기법은 알고리즘이 간단하고 정량적인 분석이 가능한 결과를 얻을 수 있다는 장점이 있으나 고층건물밀집지역을 보여주고 있는 고해상도 항공영상의 적용과정에서는 폐색영역, 그림자 등으로 인해 정확한 변화탐지 결과를 보여주지 못했다. 영상중첩 분석(Image Overlay)기법은 한 번에 두 개 또는 세 개의 영상을 비교 분석할 수 있다는 장점이 있으나 직관적인 분석만을 제공하고 정량적인 분석이 불가능하였다. 현재의 화소기반 영상변화탐지 기술수준으로는 고해상도 공간영상에 대한 신뢰도 높은 변화탐지 분석결과를 얻을 수 없다는 것을 확인하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.106-108
• /
• 2002

반도체 physical layout design rule이 작아짐에 따라 Proximity effect와 overlay가 Pattern 구현에 크게 영향을 미치고 있다. Metal layer와 contact의 부족한 overlay margin으로 overlay 불량이 발생하고, 감소한 space margin으로 인해 bridge와 같은 문제가 나타난다. 따라서, resolution을 향상시키고, 최소한의 overlay margin을 확보함으로써 미세 pattern의 구현을 가능하게 한다. 이를 위해 OPC와 attPSM 같은 분해능향상기술이 사용된다. 그러나 attPSM의 사용은 원하지 않는 pattern이 생성되는 sidelobe와 같은 문제가 발생한다. 따라서 serial image simulation올 통해 추출한 rule을 rule-based correction에 적용하여 sidelobe현상을 방지한다. 그리고 overlay margin 부족으로 나타나는 문제는 metal layer와 contact overlap되는 영역의 line edge를 확장하고, rule checking을 통해 최소한의 space margin을 확보하여 해결한다 따라서 overlay error를 rule-based correction을 사용하여 효과적으로 방지한다.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1259-1268
• /
• 2004

To organize training in limited training area for an actuai combat, realistic training simulation plugged in by various battle conditions is essential. In this paper, we propose a virtual target overlay technique which does not use a virtual image, but Projects a virtual target on ground-based CCD image by appointed scenario for a realistic training simulation. In the proposed method, we create a realistic 3D model (for an instructor) by using high resolution Geographic Tag Image File Format(GeoTIFF) satellite image and Digital Terrain Elevation Data (DTED), and extract the road area from a given CCD image (for both an instructor and a trainee). Satellite images and ground-based sensor images have many differences in observation position, resolution, and scale, thus yielding many difficulties in feature-based matching. Hence, we propose a moving synchronization technique that projects the target on the sensor image according to the marked moving path on 3D satellite image by applying Thin-Plate Spline(TPS) interpolation function, which is an image warping function, on the two given sets of corresponding control point pair. To show the experimental result of the proposed method, we employed two Pentium4 1.8MHz personal computer systems equipped with 512MBs of RAM, and the satellite and sensor images of Daejoen area are also been utilized. The experimental result revealed the effective-ness of proposed algorithm.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.4
• /
• pp.1-10
• /
• 2000

Satellite remote sensing images have much more information compared to a paper map. But these images are generally handled as particular image format gained from optical sensor, and must be processed and analyzed by computer with high priced digital image processing system. For the extraction of digital elevation model(DEM) from satellite image, we used the overlay image by SPOT-3 of Chuncheon area at the Kangwon province. According to the image condition, the precious geometric correction, the bundle adjustment for ortho-image generation and the stereo image mapping by several technical approaches were processed. So that we developed the methods of automatic DEM extraction and efficient stereo image map generation which can improve the digital image processing steps. Also, we applied the multiple direction birdeye view image for modeling and analysis using the remotely sensed overlay images with high resolution.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.339-342
• /
• 2010

An iris image pattern positioning with preserved edge detector, ring zone and clock zone, frequency distribution and overlay matching is presented in this paper. Edge detector is required to be powerful and detail. That is proposed by overlaying Canny with LOG (CLOG). The two reference patterns are made from allocating each gray level on the clock zone and ring zone respectively. The normalized target image is overlaid with the clock zone reference pattern and the ring zone pattern to extract overlapped number, and make a matched frequency distribution to look through a symptom and position of human organ and tissue. The iterating experiments result in the ring and clock zone positioning evaluation.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.3
• /
• pp.141-148
• /
• 2023

Accurate overlay metrology is essential to achieve high yields of semiconductor products. Overlay metrology performance is greatly affected by overlay target design and measurement method. Therefore, in order to improve the performance of the overlay target, measurement methods applicable to various targets are required. In this study, we propose a new algorithm that can measure image-based overlay. The proposed measurement algorithm can estimate the sub-pixel position by using a motion vector. The motion vector may estimate the position of the sub-pixel unit by applying a quadratic equation model through polynomial expansion using pixels in the selected region. The measurement method using the motion vector can calculate the stacking error in all directions at once, unlike the existing correlation coefficient-based measurement method that calculates the stacking error on the X-axis and the Y-axis, respectively. Therefore, more accurate overlay measurement is possible by reflecting the relationship between the X-axis and the Y-axis. However, since the amount of computation is increased compared to the existing correlation coefficient-based algorithm, more computation time may be required. The purpose of this study is not to present an algorithm improved over the existing method, but to suggest a direction for a new measurement method. Through the experimental results, it was confirmed that measurement results similar to those of the existing method could be obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.18-21
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher due to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method is applied with the rule based optical proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design nile is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.332-343
• /
• 2016

With the advance of digital technology, new methods which acquire color information and combine it with various contents are emerging. Color has some effect on emotion while it gives some information as component of an image. In addition, change in emotion and sensation from color stimulus makes some change in cognition. This research investigate the effect of color overlay on cognition depending on emotional state. With this goal, subjects consisting of 10 men and 10 women solved some problems with color overlay of red, orange, and green after watching short video clips which intend to induce target emotion. Experimental results show that red color overlay under positive emotion significantly reduces the average score of solving problems, while green overlay under negative emotion significantly increases it. It is also analyzed that there is not statistically significant difference in cognitive function with color overlay while it is significantly better under positive emotion than negative emotion without color overlay.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.57-68
• /
• 1999

In case of topographic information construction it is most important as basemap determines the success or failure of GIS It is argument that digitizing works of basemap are divided by NGIS and PBLIS. So, it have to accompany the combination and application of cadastral information for constructing a usful basemap. In this study, we generated ortho image map using 1:5,000 aerial-photography image, present the comparative analysis for the overlay accuracy and map revision of topographic and cadastral information using ortho image map to base map. So, we present application schemes for land use, environment, and city planning field as well as union database by overlaying of image map and cadastral information.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.2
• /
• pp.62-66
• /
• 2014

Image registration is the process for finding the correct geometrical transformation that brings one image in precise spatial correspondence with another image. There are limitations on the visualization of simple overlay between two different modality images because two different modality images have different anatomical information, resolution, and viewpoint. In this paper, various image registration methods and their applications are introduced. With the recent advance of medical imaging device, image registration is used actively in diagnosis support, treatment planning, surgery guidance and monitoring the disease progression.