• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.7-14
• /
• 2019

In this paper, we propose a Cascade Classifier face detection method using the Haar-like feature, which is complemented by the Flood Fill algorithm for lossy areas due to illumination and shadow in YCbCr color space extraction. The Cascade Classifier using Haar-like features can generate noise and loss regions due to lighting, shadow, etc. because skin color extraction using existing YCbCr color space in image only uses threshold value. In order to solve this problem, noise is removed by erosion and expansion calculation, and the loss region is estimated by using the Flood Fill algorithm to estimate the loss region. A threshold value of the YCbCr color space was further allowed for the estimated area. For the remaining loss area, the color was filled in as the average value of the additional allowed areas among the areas estimated above. We extracted faces using Haar-like Cascade Classifier. The accuracy of the proposed method is improved by about 4% and the detection rate of the proposed method is improved by about 2% than that of the Haar-like Cascade Classifier by using only the YCbCr color space.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.321-326
• /
• 2019

Image denoising methods based on block matching are founded on the experimental observations that neighboring patches or blocks in images retain similar features with each other, and have been proved to show superior performance in denoising different kinds of noise. The methods, however, take into account only neighboring blocks in searching for similar blocks, and ignore the characteristic features of the reference block itself. Consequently, denoising performance is negatively affected when outliers of the Gaussian distribution are included in the reference block which is to be denoised. In this paper, we propose an expanded block matching method in which noisy images are first decomposed into a number of bit-planes, then the range of true signals are estimated based on the distribution of pixels on the bit-planes, and finally outliers are replaced by the neighboring pixels belonging to the estimated range. In this way, the advantages of the conventional Gaussian filter can be added to the blocking matching method. We tested the proposed method through extensive experiments with well known test-bed images, and observed that performance gain can be achieved by the proposed method.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.257-266
• /
• 2018

The implication of this study is that the development and market participation of the next generation eco - friendly vehicles is accelerating, and consumers 'interest is increasing. Also, the product attributes of environment - friendly vehicles and the government's policy support for the next generation eco - friendly vehicles. The purpose of this study is to investigate the effect of purchasing behavior of eco-friendly vehicles on the product attributes of eco-friendly vehicles. Economic, image, functionality, and service convenience have positive effects on consumers' purchase intention. As a result of examining the moderating effect of the government support policy between the product attributes of environment - friendly vehicles and the purchase intentions of environment - friendly vehicles, the government or municipal government has no control effect such as vehicle price subsidy, vehicle tax subsidy, Carbon tax support to prevent emissions was found to have a moderating effect of supporting 10,000 won per ton, even if 5,000 won per ton was supported. This suggests that consumers who prefer to buy eco-friendly vehicles are more likely to have environmental factors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.229-235
• /
• 2019

The implementation of an in-band full-duplex wireless communication system is demonstrated in this study. In the analog/RF domain, the self-interference(SI) signal is reduced using a separate antenna for the transmitter and receiver paths, and most of the SI signal is canceled in the digital domain. A software defined radio(SDR) is used to implement the in-band full-duplex wireless communication system. The USRP X310 device uses transmitting and receiving antennas. By adjusting the gain of the transmitting and receiving ends of the SDR device, the magnitude of the SI signal entering the receiving antenna, and the size of the received signal from the outside, are both set to -64 dB. To verify the in-band full-duplex wireless communication performance, the source data is image and orthogonal frequency-division multiplexing is used for modulation. A WiFi standard frame with a carrier frequency of 2.67 GHz and bandwidth of 20 MHz is used. In the received signal, the SI signal is canceled by digital signal processing and the SI signal is attenuated by up to 34 dB. OFDM demodulation was impossible when the SI signal was not removed. However, the bit error rate is reduced to $2.63{\times}10^{-5}$ when the SI signal is attenuated by 34 dB, and no error is detected in the 100 Mbit data output as a result of passing through the Viterbi decoder.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1445-1456
• /
• 2018

The purpose of this study is to compare the quality and characteristics of matching DEMs by using KOMPSAT-3 stereo pair capture in in-track and cross-track. For this purpose, two stereo pairs of KOMPSAT-3 were collected that were taken in the same area. The two stereo pairs have similar stereo geometry elements such as B/H, convergence angle. Sensor modeling for DEM production was performed with RFM affine calibration using multiple GCPs. The GCPs used in the study were extracted from the 0.25 m ortho-image and 5 meter DEM provided by NGII. In addition, matching DEMs were produced at the same resolution as the reference DEMs for a comparison analysis. As a result of the experiment, the horizontal and vertical errors at the CPs indicated an accuracy of 1 to 3 pixels. In addition, the shapes and accuracy of two DEMs produced in areas where the effects of natural or artificial surface land were low were almost similar.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.78-93
• /
• 2013

The purpose of this study is to analyze college students' perception of national natural heritages, including natural monumentsand scenic sites, in comparison with the similar concepts of national parks and eco-landscape preservation areas, to suggest managerial implications to enhance competitiveness. The first objective of this study is to measure their attitude toward traveling each type of natural heritage and to rate the relative importance of the four types of heritages in terms of preservation. Natural monuments were perceived as the most strongly preserved type, while scenic sites were perceived as the least strongly preserved type. The second objective is to conduct a correspondence analysis to match the concepts of four types of natural heritages with 10 tourist attractions representing the types. It was found that college students have difficulty appropriately identifying the types of 10 tourist attractions. In addition, multi-dimensional scaling (MDS) was implemented to identify the similarities and differences of the four types of natural heritages and to produce a positioning map matching the four types of natural heritages with the six attributes representing each type as a tourist attraction. Natural monuments were perceived very differently from scenic sites and not very differently from eco-landscape preservation areas. There were a few associations between the four types of natural heritages and the six tourism attributes, implying that little effort is made to promote and position each type of natural heritage in terms of tourism. In conclusion, a public awareness program is required to enhance the brand image of natural monuments and scenic sites in comparison to national parks and eco-landscape preservation areas. In addition, local residents who live near the natural heritages should be bolstered to play a managerial role as supporters and contents providers for sustainability.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.226-236
• /
• 2019

In this study, functional and emulsifying properties of oil extracted by supercritical carbon dioxide from balloonflower(Platycodon grandiflorum A. DC) seeds were investigated. The oil was lower in total polyphenol content(8 mg/100 g), but higher in ${\alpha}$-tocopherol(14.15 mg/100 g), ${\beta}$-sitosterol(116 mg/100 g) and stigmasterol(8 mg/100 g) contents than seeds. Based on DPPH radical scavenging activity, the oil($IC_{50}=1235.5{\mu}g/mL$) showed similar antioxidant activity to the seeds($IC_{50}=1138.2{\mu}g/mL$). At 1%(w/w) lecithin, O/W emulsion with balloonflower seeds oil had turbidity, microscopic image, mean particle size and emulsion stability similar to emulsion with soybean oil, but had lower turbidity and emulsion stability and larger mean particle size than emulsion with perilla seeds oil. Its surface tension was similar to perilla oil emulsion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.630-637
• /
• 2019

The scientific, economical and industrial values of the Moon have been increased, as massive ice-water and rare resource were founded from the lunar exploration missions. Korea and other major space agencies in the world are competitively developing the ISRU (In Situ Resource Utilization) technology to secure future lunar resource as well as to construct the lunar base. To prepare for the lunar construction, it is essential to develop the rover based construction spatial information technology to provide a decision-making aided information during the lunar construction process. Thus, this research presented the construction spatial information technology based upon rover's camera system. Specifically, the conceptual design of rover based camera system was designed for acquisition of a rover's navigation image, and lunar terrain and construction images around the rover. The reference architecture of the rover operation system was designed for computation of the lunar construction spatial information. Also, rover's localization and terrain reconstruction methods were introduced considering the characteristics of lunar surface environments. It is necessary to test and validate the conceptual design of the construction spatial information technology. Thus, in the future study, the developed rover and rover operation system will be applied to the lunar terrestrial analogue site for further improvements.

• 한국노년학
• /
• v.37 no.3
• /
• pp.763-781
• /
• 2017

This study explores the relationship between indirect contacts of older adults and ageism related behaviors by investigating adults' exposure to portrayals of older people and their images in media. This study also investigates how indirect contacts of older adults influence ageism related behaviors such as avoidance and discrimination against older adults through attitudes and social norms about older adults. Using an online survey collected from 252 adults aged 18-64 years, the authors found that indirect contacts of older adults through media predicted attitude toward older adults as well as social norms. The results also revealed that social norm predicted both avoidance and discrimination behavior against older adults while attitude toward older adults only predicted avoidance behavior. Finally, the findings indicated that attitude toward older adults mediated the relationship between indirect contacts through media and avoidance behavior. However, social norm mediated the relationships between indirect contacts through media and discrimination as well as avoidance behaviors. Implication and limitation of the findings are discussed.

• Conservation Science in Museum
• /
• v.24
• /
• pp.55-74
• /
• 2020

The Sacred Bell of Great King Seongdeok is required digital precision recording of conservation conditions because of corrosion and partial abrasion of its patterns and inscriptions. Therefore, this study performed digital documentation of the bell using four types of scanning and unmanned aerial vehicle (UAV) photogrammetry technologies, and performed the various shape analyses through image processing. The modeling results of terrestrial laser scanning and UAV photogrammetry were merged and utilized as basic material for monitoring earthquake-induced structural deformation because these techniques can construct mutual spatial relationships between the bell and its tower. Additionally, precision scanning at a resolution four to nine times higher than that of the previous study provided highly valuable information, making it possible to visualize the patterns and inscriptions of the bell. Moreover, they are well-suited as basic data for identifying surface conservation conditions. To actively apply three-dimensional scanning results to the conservation of the original bell, the time and position of any changes in shape need to be established by further scans in the short-term. If no change in shape is detected by short-term monitoring, the monitoring should continue in medium- and long-term intervals.