• 제목/요약/키워드: Image Detector

검색결과 914건 처리시간 0.028초

세기검출기를 이용한 광 영상 암호화 (Optical Image Encryption Based on Characteristics of Square Law Detector)

  • 이응대;박세준;이하운;김수중
    • 대한전자공학회논문지SD
    • /
    • 제39권3호
    • /
    • pp.34-40
    • /
    • 2002
  • 본 논문에서 위상변조와 푸리에 변환을 이용하여 이진 영상을 위한 새로운 암호화 방법을 제안한다. 복호를 위해서 제곱칙 특성을 이용한다. 키 영상은 랜덤 패턴의 위상변조와 그의 푸리에 변환으로 구해지며 입력영상은 위상 변조된 랜덤 패턴과 위상 변조된 입력의 곱을 푸리에 변환함으로서 암호화된다 암호화된 영상과 키 영상은 위상 정보만을 가지므로 일반 세기 검출기로는 복사나 위조가 불가능하며 복호는 키 영상에 의해서만 가능하다. 원 영상을 재생하기 위해, 키 영상과 암호화된 영상의 위상 마스크는 푸리에 변환 렌즈와 함께 각각 마흐-젠더 간섭계 경로에 따로 두며 출력 영상은 CCD 카메라에 세기 형태로 나타난다. 제안한 방법은 위상 변조기로 LCD를 사용하고 CCD 카메라의 특성을 이용하여 재생하므로 실시간 처리가 가능하다. 제안된 방법이 컴퓨터 모의 실험과 광학적 실험 결과 암호화 구조로서 우수한 성능을 갖음을 보여준다.

물체-검출기 동기회전 방식의 X-선 단층영상시스템 설계 및 성능개선에 관한 연구 (Design and Performance Improvement of a Digital Tomosynthesis System for Object-Detector Synchronous Rotation)

  • 강성택;조형석;노병옥
    • 제어로봇시스템학회논문지
    • /
    • 제5권4호
    • /
    • pp.471-480
    • /
    • 1999
  • This paper presents design and performance improvement of a new digital tomosynthesis (DTS) system for object-detector synchronous rotation. Firstly, a new DTS system, called OSDR (Object-Detector Synchronous Rotation) is suggested and designed to acquire X-ray digital images. Secondly, the shape distortion of DTS images generated by an image intensifier is modeled. And a new synthesis algorithm, which overcomes the limitations of the existing synthesis algorithm, is suggested to improve the sharpness of the synthesized image. Also an artifact analysis of the DTS system is performed. Thirdly, some performance indices, which evaluate quantitatively performance improvement, are defined. And the experimental verification of the performance improvement is accomplished by the ODSR system newly designed. The advantages of the ODSR system are expressed quantitatively, compared with an existing system.

  • PDF

칼라 히스토그램과 변화 검출기에 기반한 비디오 영상 분할 (Video image segmentation based on color histogram and change detector)

  • 박진우;정의윤;김희수;송근원;하영호
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.1093-1096
    • /
    • 1999
  • In this paper, video image segmentation algorithm based on color histogram and change detector is proposed. Color histograms are calculated from both changed region which is detected in the previous and current frame and unchanged region. With each histogram, modes and valleys are detected. Then, color vectors are calculated by averaging pixels in modes. Markers are extracted by labeling color vectors that represent modes, the watershed algorithm is applied to determine uncertain region. In growing region, the root mean square(RMS) of the distance between average pixel in marker region and adjacent pixel is used as a measure. The proposed algorithm based on color histogram and change detector segments video image fastly and effectively. And simulation results show that the proposed method determines the exact boundary between background and foreground.

  • PDF

적외선 영상의 Salt-Pepper 잡음제거를 위한 적응 비선형 필터 (Adaptive Nonlinear Filter for Removal of Salt-Pepper Noise in Infrared Image)

  • 이재일;김성환
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제55권9호
    • /
    • pp.429-434
    • /
    • 2006
  • In this paper, detection based - adaptive windowed nonlinear filter(DB-AWNF) is proposed for removing salt-pepper noise in infrared image. This filter is composed of impulse detector and window-size-variable median filters. Impulse detector checks whether current pixel is impulse or not using range function and nonlinear location estimator. If impulse is detected, current pixel is filtered according to four kinds of local masks by use of median filter. If not, current pixel is delivered to output like identity filter. In Qualitative view, the proposed could have removed heavy corrupted noise up to 30% and reserved the details of image. In quantitative view, PSNR was measured. The proposed could have about 12-31[dB] more improved performance than those of median $(3{\times}3)$ filter and 13-29[dB] more improved performance than those of median $(5{\times}5)$ filter.

동적 프로그래밍을 이용한 특징점 정합 (Matching Of Feature Points using Dynamic Programming)

  • 김동근
    • 정보처리학회논문지B
    • /
    • 제10B권1호
    • /
    • pp.73-80
    • /
    • 2003
  • 본 논문에서는 기준영상과 탐색영상 사이의 대응되는 특징 점을 정합 하는 알고리즘을 제안한다. 두 영상에서 특징 점을 찾기 위하여 Harris의 코너 점 검출기를 사용하였다. 기준영상의 각 특징 점에 대해, 정규상관계수가 임계치 이상인 탐색영상의 특징 점들로 후보 정합 점을 구한다. 최종적으로 동적 프로그래밍을 사용하여 후보 정합 점들 중에서 대응되는 특징 점을 구한다. 실험으로 인위적인 영상과 실제 영상에서 특징 점을 정합 하는 결과를 보였다.

Iris Pattern Positioning with Preserved Edge Detector and Overlay Matching

  • Ryu, Kwang-Ryol
    • Journal of information and communication convergence engineering
    • /
    • 제8권3호
    • /
    • pp.339-342
    • /
    • 2010
  • An iris image pattern positioning with preserved edge detector, ring zone and clock zone, frequency distribution and overlay matching is presented in this paper. Edge detector is required to be powerful and detail. That is proposed by overlaying Canny with LOG (CLOG). The two reference patterns are made from allocating each gray level on the clock zone and ring zone respectively. The normalized target image is overlaid with the clock zone reference pattern and the ring zone pattern to extract overlapped number, and make a matched frequency distribution to look through a symptom and position of human organ and tissue. The iterating experiments result in the ring and clock zone positioning evaluation.

오픈소스 하드웨어를 사용한 저비용 열화상 잔불탐지 장치 개발 (Development of a Low-Cost Thermal Image Hidden Fire Detector Using Open Source Hardware)

  • Moon, Sangook
    • 한국정보통신학회논문지
    • /
    • 제23권12호
    • /
    • pp.1742-1745
    • /
    • 2019
  • Hidden flame detection after allegedly extinguishing a fire cannot be emphasized enough. There are a few commercial hidden fire detection equipments which are imported, but the cost is relatively high. In this contribution, we propose a development of a low-cost, high-performance hidden flame detector using open-source hardware/software. We use Raspberry-pi based hardware board equipped with a TFT touch-screen LCD, a 3G modem, and an attachable battery device altogether integrated in a plastic case fabricated with a 3D printer. The proposed hidden flame detector shows the same performance of a commercial product FLIR E5 while consuming less than a half of the cost.

CZT와 NaI 검출기 물질 기반 물리적 변화에 따른 영상의 질 분석에 관한 연구: 몬테카를로 시뮬레이션 (A Study for Analysis of Image Quality Based on the CZT and NaI Detector according to Physical Change in Monte Carlo Simulation)

  • 고혜림;유유리;박찬록
    • 한국방사선학회논문지
    • /
    • 제15권5호
    • /
    • pp.741-748
    • /
    • 2021
  • 본 연구의 목적은, 몬테 카를로 시뮬레이션 기반 조준기 길이와 검출기 두께 변화에 따른 Cadimium Zinc Telluride (CZT) 와 NaI 검출기 물질을 변화하면서 영상의 질을 비교 평가 해보고자 한다. CZT 와 NaI 검출기 물질 기반 감마카메라를 각각 모사하였고, 조준기 길이는 1, 2, 3, 4, 5, 6 cm, 검출기 두께는 1, 3, 5, 7 mm 로 설정하였다. 1 MBq의 점선원을 이용해 민감도, 4.45, 3.80, 3.15, 2.55 mm 의 지름을 가진 자체 제작한 팬텀을 모사하고, 가장 큰 지름인 4.45 mm 영상에 관심영역을 설정하여 signal to noise ratio (SNR)과 프로파일을 이용하여 각각 획득영상을 분석하였다. 조준기 길이에 따른 CZT 검출기 기반 민감도는 2.3 ~ 48.6 cps/MBq, NaI 검출기 기반 민감도는 1.8 ~ 43.9 cps/MBq 이고, CZT 검출기 기반 팬텀을 활용한 SNR은 3.6 ~ 9.8, NaI 검출기 기반 팬텀 SNR은 2.9~9.5다. 조준기 길이 변화에 따른 프로파일은 조준기의 길이가 증가할수록 영상의 공간 분해능이 향상함을 확인하였다. 또한, 검출기 두께에 따른 CZT 검출기 기반 민감도는 0.04 ~ 0.12 cps/MBq 이고, NaI 검출기 기반 민감도는 0.03 ~ 0.11 cps/MBq 다. CZT 검출기 기반 팬텀 SNR은 7.3~9.8 이며, NaI 검출기 기반 팬텀 SNR은 5.9~9.5다. 또한, 검출기 두께 변화에 따른 프로파일은 검출기 두께가 증가할수록 산란선이 증가함으로써 영상의 공간 분해능이 감소함을 확인하였다. 이 연구데이터를 기반으로 영상 획득 목적에 따라 검출기의 종류와 두께, 조준기의 길이를 선택하여 최고의 영상의 질을 획득할 수 있어야 한다.

Liquid crystal modulator를 이용한 엑스선 검출기에 관한 연구 (Study for X-ray detector using liquid crystal modulator)

  • 허승욱;조성호;김윤석;김영빈;남상희;박지군
    • 한국방사선학회논문지
    • /
    • 제3권1호
    • /
    • pp.5-9
    • /
    • 2009
  • 디지털 방사선 검출기의 주된 연구동향은 영상의 해상도 향상, 대면적화, 동영상 구현 등${\cdots}$ 이라 할 수 있다. 이런 연구는 방사선 변환과정에 따라 크게 직접변환 방식과 간접 변환 방식으로 나눌 수 있으며 각각 고유한 장단점을 내포하고 있다. 간접변환 방식의 경우 형광체의 사용으로 인한 Light scattering 문제로 해상력의 저하 그리고 직접방식의 경우는 낮은 system 안정성과 동영상 구현의 어려움 등이 대표적이라 할 수 있다. 이런 문제를 해결하기 위한 연구로써 액정을 이용한 엑스선 검출기 연구가 진행되었으나 그 구조의 특성상 균일한 액정의 주입이 어려워 제작에 있어 많은 어려움이 있다. 따라서 본 논문에서는 기존의 문제점을 해결할 수 있는 구조를 제안하고 이를 Simulation 통해 제안된 구조의 가능성을 검토해 보았다.

  • PDF

Scannogram, Whole Spine image 획득에 관한 연구 (The Research for Scannogram)

  • 이광재;고신관;김욱동;김시돈;김형섭
    • 대한디지털의료영상학회논문지
    • /
    • 제10권1호
    • /
    • pp.35-40
    • /
    • 2008
  • I.objective The composition method with acquiring 2${\sim}$5 image not only lack perfection in compensating the geometrical distortion but could also cause inaccurate connection problem of compensating the geometrical distortion but could also cause inaccurate connection problem of continuing bone structure due to the enlargement ratio difference of ruller and bone, density difference in image composition process. This paper studies those mentioned problems through the experiments. II. Object and method Experiment 1 After attaching 3 step wedge(Pb) on detector and 2 ruller on upper, lower part of the step wedge, we have exposed them to create density difference between 1st image and 2nd image, then examined if there were any errors. Experiment 2 1st 100cm ruller was attached on the center of detector, and by escalating the distance between 2nd 100cm ruller and detector 5cm, 10cm, 15cm respectively, we investigated if there any errors caused by enlargement ratio. Experiment 3 The ruller was placed on detector, a joint photographing was performed through spot photographing after fully operating the electric field photographing to include hip joint ${\sim}$ ankle joint part and we have compared the values from two methods. III. Result : A horizontal axis error was caused when photopraphing is not poerated in equal density since the image shifted horizontally in accordance with the difference of Pb step wedge 1 due to the density difference, as the result of Epperiment 1.

  • PDF