• 한국컴퓨터정보학회논문지
• /
• 제22권10호
• /
• pp.19-26
• /
• 2017

In this paper, we propose an efficient image equipment implementation for the detector characteristics of various detectors by analyzing un-cooled thermal detector that exhibits nonlinear changes due to external temperature effects. First, we explain Thermal Electric Cooler for un-cooled detector temperature control system and Non-image correction methode for IR system. Second, we present the results of a study on an efficient control technique that can minimize the deterioration of image quality by controlling a un-cooled thermal detector without a thermal electric cooler(TEC) inside. Third, we suggest Image Correction Methods for Uncooled IR TECless Detector with Non-linear characteristics due to Temperature Change. So, we analyze and present the results of Image correction methods for various un-cooled thermal detector.

• 한국콘텐츠학회논문지
• /
• 제21권1호
• /
• pp.119-128
• /
• 2021

교통정보를 생성하기 위한 가장 전형적인 방법은 차량검지기를 도로에 설치하여 각종 교통변수를 수집하는 방법으로 차량검지기의 수집 정확성에 따라 생성되는 교통정보의 신뢰성에 영향을 미친다. 가장 범용적인 차량검지기는 영상검지기이며, 본 연구에서는 지자기검지기를 영상검지기와 동일 지점에 설치하여 장기간, 다양한 환경에 대해 교통량, 속도 자료에 대한 정확성 평가를 수행하였다. 평가결과 영상검지기는 카메라에서 멀어질수록 오차가 많이 발생하며, 주간보다는 야간에 오차가 많이 발생하는 것으로 분석되었다. 또한 강우량은 교통량 수집에는 영향을 미치지 않으나 속도 수집에는 악영향을 미치는 것으로 나타났다. 따라서 현재 운영 중인 영상검지기의 성능을 높이기 위해서는 설치위치 및 높이에 따른 카메라 화각분석 및 이에 따른 화각의 최적화가 요구되며, 악천후 시에는 별도의 성능평가기준이 마련되어야 할 것으로 판단된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제14권1호
• /
• pp.61-72
• /
• 1991

In this paper, the rotating plate method extracting signal and reconstructing original image was proposed. The rotating methode has cell detector array each of which has used in the medical diagnosis X-ray photography. The major problem using the simple horizontal moving or non-moving methode is the size and number of detector cells which have the considerable affection on the sharpness and resolution of the reconstructed image. Secondary, the estimated pixel values of non-detected real points which are placed between detector cells will be the distorted pixels in the reconstructed image. Therefore, the proposed rotating plate method has the exact distribution on the uncertain pixels which were reconstructed by conventional methods to solve there problems. And then, the image using the rotated plate's cell out put signal was reconstructed on the computer simulation. The method will rotated the detector array plate to solve the reconstruction from the detector size and number of conventional methods. The result of simulation has estimated the original pixel position and 81 pixel/mm resolution which the reconsiderlation of the detector's moving orientation, the proposed method has 25 pixel/mm resolution. These results have been represented by 3-D computer graphics.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2567-2571
• /
• 2023

Scintillator materials are widely used in the medical and industrial fields for imaging systems using gamma cameras. In this study, image evaluation is performed by modeling a gamma camera system based on a lutetium-yttrium oxyorthosilicate (LYSO) scintillation detector using a pinhole collimator that can improve the spatial resolution. A LYSO detector-based gamma camera system is modeled using a Monte Carlo simulation tool. The geometric concept of the pinhole collimator is designed using various magnification factors, and the spatial resolution is measured using the acquired source image. To evaluate the resolution, the full width at half maximum (FWHM) and natural image quality assessment (NIQE), a no-reference-based parameter, are used. We confirm that the FWHM and NIQE values decrease simultaneously when the diameter of the pinhole collimator increases. Additionally, we confirm that the spatial resolution improves as the magnification factor increases under the same pinhole diameter condition. Particularly, a 0.57 mm FWHM value is obtained using the modeled gamma camera system with a LYSO scintillation detector. In conclusion, our results demonstrate that a pinhole collimator with a LYSO scintillation detector is a promising gamma camera imaging system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.663-668
• /
• 2003

This paper presents a new observation system which is useful to observe the scene of the remote controlled robot vision. This system is composed of a motionless camera and head motion detector with a motion sensor. The motionless camera has a fish eye lens and is for observing a hemisphere space. The head motion detector has a motion sensor is for defining an arbitrary subspace of the hemisphere space from fish eye lens. Thus processing the angular information from the motion sensor appropriately, the direction of face is estimated. However, since the fisheye image is distorted, it is unclear image. The partial domain of a fish eye image is selected by head motion, and this is converted to perspective image. However, since this conversion enlarges the original image spatially and is based on discrete data, crevice is generated in the converted image. To solve this problem, interpolation based on an intensity of the image is performed for the crevice in the converted image (space problem). This paper provides the experimental results of the proposed observation system with the head motion detector and perspective image conversion using the proposed conversion and interpolation methods, and the adequacy and improving point of the proposed techniques are discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.390-392
• /
• 2005

The digital radiation detectors are used clinically by diagnostic apparatus. However the digital radiation detector are some problem like high operating voltage, light blurring, low conversion efficiency, low fill factor, etc. Thus we propose a new radiation detector that the photoconductor layer and liquid crystal layer are coupled in sandwich structure. X-ray absorption in the photoconductor layer controls the state of the liquid crystal via creation of charge carrier and the light modulation of liquid crystal make image formation. The advantage of the new radiation detector is that high resolution image is acquired and the signal amplification is possible by external visible light source. In this study, we study the optical properties and electrical properties of the new radiation detector to irradiate X-ray. The Mercury Iodide($HgI_2$) was used by photoconductor material, and the aluminum is used by reflective layer. The thickness of Mercury Iodide is about $200{\mu}m$, the operating voltage of the liquid crystal is 1.5~5V. The electrical properties of Mercury Iodide was measured, and the transmission efficiency of liquid crystal was measured by modulation potential.

• 한국ITS학회 논문지
• /
• 제12권5호
• /
• pp.22-35
• /
• 2013

본 논문은 영상검지기 증가에 따라 교통정보 신뢰도에 대한 우려가 높아지고 있는 바, 지점검지기 데이터 분석을 통해 신뢰도가 높은 대표 구간 교통량 생성방법을 제안하였다. 이를 위해 고속도로를 대상으로 영상과 루프 검지기에서 각각 수집된 교통량 차이를 비교분석하고 통계적으로 검증하였으며, 실측교통량과의 오차율을 분석하였다. 분석 결과, 영상검지기와 루프검지기에서 각각 수집된 교통량은 동일 구간, 동일한 시간대에 수집된 자료라도 차이가 있었으며, 이는 통계적으로 유의하였다. 또한 루프검지기에서 수집된 교통량이 실측교통량과의 가장 차이가 적어, 대표 구간 교통량 생성 시 루프 및 영상 교통량을 평균하는 현재의 방법보다 영상검지기보다 신뢰도가 높은 루프 검지기 자료를 대표치로 이용하는 방법을 제안하였다. 이는 다양한 신뢰도를 보이는 많은 데이터를 이용하여 대표치를 생성하는 것보다, 하나라도 보다 신뢰성이 높은 데이터를 대표치로 이용하는 것이 훨씬 양질의 데이터를 생성할 수 있음을 보여준다. 다만, 루프검지기라고 할지라도 유지관리 및 기타 다양한 요소에 의해 신뢰도가 저하될 수 있으므로 검지기 상태에 대한 검증과 평가는 반드시 전제되어야 한다.

• 전자공학회논문지CI
• /
• 제47권1호
• /
• pp.160-170
• /
• 2010

본 논문은 Haar 웨이브릿변환과 평균 박스필터에 기반을 둔 Haar 웨이브릿 특징 검출자를 제안한다. 원 영상을 Haar 웨이브릿 변환을 통해 분해하여 영상의 분산정보를 얻고 영상 식별을 위한 특징정보를 추출한다. 영역을 나타내는 주위영역들 중에 분산이 가장 큰 영역의 관심점을 검출하기 위하여 국부 분산정보를 비교하는 평균 박스필터를 적용하고 빠른 계산을 위한 적분영상 기법을 사용한다. Haar 웨이브릿 변환과 평균 박스필터를 이용하여 제안한 검출자는 밝기 변화, 스케일 변화, 영상의 회전에 민감하지 않는 특성을 제공할 수 있다. 실험결과는 제안한 방법이 적은 관심점을 사용하는 경우에도 기존의 DoG 검출자와 Harris corner 검출자에 비해 더 높은 repeatability와 효율성 그리고 매칭정확성을 달성할 수 있음을 보여준다.

• 핵의학기술
• /
• 제27권2호
• /
• pp.129-132
• /
• 2023

Purpose: Positron emisson tomography (PET) is a crucial medical imaging scanner for the detection of cancer lesions. In order to maintain the improved image quality, it is crucial to apply detectors of superior performance. Therefore, the purpose of this study was to compare PET image quality using Monte Carlo simulation based on the detector materials of BGO, LSO, and LuAP. Materials and Methods: The Geant4 Application for Tomographic Emission (GATE) was used to design the PET detector. Scintillations with BGO, LSO and LuAP were modelled, with a size of 3.95 × 5.3 mm2 (width × height) and 25.0 mm (thickness). The PET detector consisted of 34 blocks per ring and a total of 4 rings. A line source of 1 MBq was modelled and acquired with a radius of 1 mm and length of 20 mm for 20 seconds. The acquired image was reconstructed maximum likelihood expectation maximization with 2 iteration and 10 subsets. The count comparison was carried out. Results and Discussion: The highest true, random, and scatter counts were obtained from the BGO scintillation detector compared to LSO and LuAP. Conclusion: The BGO scintillation detector material indicated excellent performance in terms of detection of gamma rays from emitted PET phantom.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.111-116
• /
• 1998

In this paper, we proposed method of performance enhancement of the ultrasonic imaging system using quadrature detector and implementation of the software quandrature detector. Since the quadrature detector is more sensitive than the enbelope detector of the conventional ultrasonic imaging syustem, we are able to achieve the contrast enhnacement. Although hardware quadrature detector is able to process high sped data acquisition, its hardware has complexity. In order to show the performance of the software quadrature we have constructed ultrasonic signal processing system and obtained the reflected signal from the aluminum specimen using A/D convertor. Our experimental results showed that image of the quadrature detector is better than that of the envelope detector.