• 제목/요약/키워드: Image Detector

검색결과 914건 처리시간 0.024초

진폐요양환자의 흉부 CT촬영에 사용된 선량 - 국내외 진단 참고 준위와 비교 - (Radiation Dose using Chest CT for Patients with Pneumoconiosis Complication - Comparison with International Guidelines -)

  • 이원정
    • Journal of Radiation Protection and Research
    • /
    • 제39권4호
    • /
    • pp.206-212
    • /
    • 2014
  • 진폐요양기관에 대한 실태조사를 실시하여 진폐요양환자에게 사용되는 흉부 CT촬영 선량이 국내외 진단 참고 준위 내에서 사용되는지 알아보았다. 진폐요양기관은 27개 중에서 운용자 콘솔 컴퓨터에서 환자 피폭선량(dose length product, $mGy^*cm$, 이하 DLP) 확인이 가능한 2-Detector 이상 설치된 17개 기관을 대상으로 하였다. 연구대상기관을 직접 연구자가 방문하여 위치잡이촬영, 조영제 사용전,후촬영 및 총 DLP 값을 각각 확인하였다. 또한, 장치의 기본 항목, 위치잡이촬영 조건, 본촬영(scanning) 조건 및 영상 획득 조건을 확인하였다. 흉부 CT촬영에서 확인된 총 DLP 값, 조영제주입전촬영 DLP 값의 상향서열 3/4 순위에 해당하는 DLP 값을 구하였다. SPSS ver. 19.0을 사용하여 전체 영상과 폐야영상 간에 조영제주입전촬영 DLP 값의 비교는 비모수 검정(Wilcoxon signed rank test)을 실시하였다. 전체영상보다 폐야영상을 얻을 때 20.2%의 유의한 DLP 값 감소를 보였다(707.2 vs. 555.9, p<0.001). 흉부 CT촬영에서 확인된 총 DLP 값의 상향서열 3/4 순위(third quartile)의 DLP 값은 $1036.1mGy{\cdot}cm$였다. 흉부 CT촬영의 조영제 주입전촬영에서 확인된 DLP 값의 상향서열 3/4 순위의 DLP 값은 $504.1mGy{\cdot}cm$였다. 진폐요양환자의 흉부 CT촬영에 사용하는 선량은 국내외 진단 참고 준위와 큰 차이를 보이지 않았다.

다층구조($CaWO_4/a-Se$) 기반의 X선 검출센서에서 a-Se에 첨가된 As의 특성비 연구 (The Study on Characteristic Composition of As in a-Se with X-ray Detection Sensor using $CaWO_4/a-Se$)

  • 최장용;이동길;신정욱;김재형;남상희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
    • /
    • pp.432-435
    • /
    • 2002
  • The ultimate study of this research is to improve the properties of digital X-ray receptor based on amorphous selenium. There are being two prominent studying for Digital Radiography. Direct and Indirect method of Digital Radiography are announced for producing high quality digital image. But each two systems have strength and weakness. This is a basic research for developing of Hybrid digital radiography which is a new type X-ray detector. ln this study, we investigated the electrical characteristic of multi-layer$(CaWO_4+a-Se)$ as a photoconductor according to the changing iodine composition ratio. The iodine composition ratio of a-Se compound is classified into 5 different kinds which have 30ppm, 100ppm, 300ppm, 500ppm, 700ppm and were made test sample throught thermo-evaporation. The phosphor layer of $CaWO_4$ was overlapped on a-Se using EFIRON optical adhesives. We measured the dark and photo current about the test sample and compared the electrical characteristic of the net charge and signal-to-noise ratio. Among other things, test sample of compound material of 700ppm iodine showed good characteristic of $2.53nA/cm^2$ dark current and $479nC/cm^2{\cdot}mR$ net charge at $3V/{\mu}m$.

  • PDF

Radiopacity of contemporary luting cements using conventional and digital radiography

  • An, Seo-Young;An, Chang-Hyeon;Choi, Karp-Sik;Huh, Kyung-Hoe;Yi, Won-Jin;Heo, Min-Suk;Lee, Sam-Sun;Choi, Soon-Chul
    • Imaging Science in Dentistry
    • /
    • 제48권2호
    • /
    • pp.97-101
    • /
    • 2018
  • Purpose: This study evaluated the radiopacity of contemporary luting cements using conventional and digital radiography. Materials and Methods: Disc specimens (N=24, n=6 per group, ø$7mm{\times}1mm$) were prepared using 4 resin-based luting cements (Duolink, Multilink N, Panavia F 2.0, and U-cem). The specimens were radiographed using films, a complementary metal oxide semiconductor (CMOS) sensor, and a photostimulable phosphor plate (PSP) with a 10-step aluminum step wedge (1 mm incremental steps) and a 1-mm-thick tooth cut. The settings were 70 kVp, 4 mA, and 30 cm, with an exposure time of 0.2 s for the films and 0.1 s for the CMOS sensor and PSP. The films were scanned using a scanner. The radiopacity of the luting cements and tooth was measured using a densitometer for the film and NIH ImageJ software for the images obtained from the CMOS sensor, PSP, and scanned films. The data were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Multilink (3.44-4.33) showed the highest radiopacity, followed by U-cem (1.81-2.88), Panavia F 2.0 (1.51-2.69), and Duolink (1.48-2.59). The $R^2$ values of the optical density of the aluminum step wedge were 0.9923 for the films, 0.9989 for the PSP, 0.9986 for the scanned films, and 0.9266 for the CMOS sensor in the linear regression models. Conclusion: The radiopacities of the luting materials were greater than those of aluminum or dentin at the same thickness. PSP is recommended as a detector for radiopacity measurements because of its accuracy and convenience.

원격탐사 자료로부터 해안선 추출에 의한 조간대 DEM 생성 (Intertidal DEM Generation Using Waterline Extracted from Remotely Sensed Data)

  • 류주형;조원진;원중선;이인태;전승수
    • 대한원격탐사학회지
    • /
    • 제16권3호
    • /
    • pp.221-233
    • /
    • 2000
  • 조간대의 지형은 연안의 동력학적 작용에 의하여 지속적으로 변화하고 있다. 이와 같은 조간대의 지형적인 변화를 정량적으로 관측하는 것은 퇴적학적 연구뿐만 아니라 연안역 통합관리 측면에서도 매우 중요하다. 이 연구의 목적은 측선을 따라 얻어진 측량자료와 비교적 단기간에 걸쳐 얻어진 광학 및 마이크로파 원격탐사 자료로부터 얻어진 수륙경계선을 이용하여 조간대 DEM을 구하는 것이다. 이 연구에서의 수륙경계선(혹은 해안선)은 해수와 노출된 조간대의 경계선으로 정의된다. 즉 수륙경계선은 특정한 상황의 조간대에서의 등고선을 의미하며, 따라서 이와 같은 방법으로 넓은 지역의 DEM을 구할 수 있다. SAR 자료의 경우는 스펙클의 영향뿐만 아니라 해수와 노출된 조간대에서 반사된 신호와의 강도가 매우 유사한 관계로 수륙경계선을 구하는 것은 매우 어렵다. 이에 따라 이 연구에서는 SAR 영상과 더불어 상관관계도(coherence map)에 MSP-RoA 경계면 추출기법을 적용하여 수륙경계선을 추출하였다. 여러 개의 영상자료로부터 얻어진 수륙경계선은 내삽과정을 거쳐 최종적인 DEM을 형성하게 된다. 이 연구에서는 곰소만 지역에 이 방법을 적용하여 정밀도가 비교적 높은 DEM을 얻을 수 있었다.

조직 등가물질 두께 증가에 따른 디지털 엑스선 영상의 해상도 분석에 관한 연구 (A Study on the Resolution Analysis of Digital X-ray Images with increasing Thickness of PMMA)

  • 김준우
    • 한국방사선학회논문지
    • /
    • 제15권2호
    • /
    • pp.173-179
    • /
    • 2021
  • 디지털 래디오그라피 시스템에서 발생하는 산란선은 신호의 증가를 가져오는 장점도 있지만 피사체를 투과한 엑스선 영상의 해상도 저하, 노이즈 증가로 궁극적인 검출능이 감소된다. 공간주파수 도메인에서 해상도를 평가하기 위한 변조전달함수(modulation-transfer function, MTF)에서 간접적으로 산란선을 측정하는 방법은 제로-주파수에 해당하는 변조전달함수 값이 강하되는 정도로 간주할 수 있다. 본 연구는 환자 조직 등가물질로 폴리메틸메타아크릴레이트(polymethyl methacrylate, PMMA)를 사용하였으며 다양한 두께에 대한 변조전달함수를 획득하여 산란선이 해상도에 미치는 영향을 정량화하였다. PMMA 두께 증가에 따라 엑스선 영상 신호는 35 ~ 83%까지 감소되는 것이 관찰되었고, 이는 PMMA에 엑스선이 흡수 혹은 산란되는 양상으로 판단되며 이러한 결과는 변조전달함수를 저하시키는 것과 동시에 산란선 비율을 증가시키는 결과로 나타났다. PMMA에 의한 변조전달함수 저하를 보정하기 위한 방법은 간접변환방식 검출기에서 발생되는 빛 퍼짐 경향까지 절단하여 변조전달함수 값의 상승을 가져왔다. 보다 합리적인 방법으로 경계확산함수(edge-spread function, ESF) 혹은 선확산함수(line-spread function, LSF)에서의 피팅, 제로 값으로 채우는 처리 등이 이루어져야 할 것으로 사료된다.

딥러닝 기반의 연기 확산거리 예측을 위한 알고리즘 개발 기초연구 (Fundamental Study on Algorithm Development for Prediction of Smoke Spread Distance Based on Deep Learning)

  • 김별;황광일
    • 해양환경안전학회지
    • /
    • 제27권1호
    • /
    • pp.22-28
    • /
    • 2021
  • 본 연구는 화재진압 및 피난활동을 지원하는 딥러닝 기반의 알고리즘 개발에 관한 기초 연구로 선박 화재 시 연기감지기가 작동하기 전에 검출된 연기 데이터를 분석 및 활용하여 원격지까지 연기가 확산 되기 전에 연기 확산거리를 예측하는 것이 목적이다. 다음과 같은 절차에 따라 제안 알고리즘을 검토하였다. 첫 번째 단계로, 딥러닝 기반 객체 검출 알고리즘인 YOLO(You Only Look Once)모델에 화재시뮬레이션을 통하여 얻은 연기 영상을 적용하여 학습을 진행하였다. 학습된 YOLO모델의 mAP(mean Average Precision)은 98.71%로 측정되었으며, 9 FPS(Frames Per Second)의 처리 속도로 연기를 검출하였다. 두 번째 단계로 YOLO로부터 연기 형상이 추출된 경계 상자의 좌표값을 통해 연기 확산거리를 추정하였으며 이를 시계열 예측 알고리즘인 LSTM(Long Short-Term Memory)에 적용하여 학습을 진행하였다. 그 결과, 화재시뮬레이션으로부터 얻은 Fast 화재의 연기영상에서 경계 상자의 좌표값으로부터 추정한 화재발생~30초까지의 연기 확산거리 데이터를 LSTM 학습모델에 입력하여 31초~90초까지의 연기 확산거리 데이터를 예측하였다. 그리고 추정한 연기 확산거리와 예측한 연기 확산거리의 평균제곱근 오차는 2.74로 나타났다.

Development of Agricultural Products Screening System through X-ray Density Analysis

  • Eunhyeok Baek;Young-Tae Kwak
    • 한국컴퓨터정보학회논문지
    • /
    • 제28권4호
    • /
    • pp.105-112
    • /
    • 2023
  • 농산물 선별 시스템은 작물의 형태를 보전하기 위하여 비파괴적인 선별이 주로 사용된다. 이러한 비파괴 선별 기술로는 가시광선, 근적외선, 엑스선, 감마선 등의 광학적 특성을 이용하고 있으며 본 논문에서는 엑스선을 이용한 선별을 이용한다. 엑스선 영상은 엑스선의 밀도에 따라 그레이 영상으로 생성되어 육안으로 시료의 결함을 감지하기가 어렵다. 미세한 결함을 발견하기 위해서는 영상을 확대하거나 픽셀의 범위를 수정하여 적정한 픽셀의 영역만을 표시하여 결함을 탐지해야 한다. 이런 작업은 비효율적이다. 따라서 본 논문은 엑스선의 광역적인 밀도와 지역적인 밀도에 대한 상대적인 밀도를 측정하여 색상화된 결함을 표시하는 새로운 방법을 제안한다. 하나의 픽셀에 대한 상대적인 밀도는 주위 픽셀과의 상대적인 차이를 나타내며, 이런 픽셀을 정상과 결함으로 나타내는 엑스선 영상의 색상화 방법도 제안한다. 실험에서는 육안으로 볼 수 없는 농작물의 병해충 또는 새싹 부분을 특정 색으로 색상화 하여 농산물 선별 시스템에 활용할 수 있게 하였다. 제안된 방법은 엑스선을 이용한 선별 시스템에 적용되어 농산물 선별 시스템뿐만 아니라 가공식품, 부품 제조와 같은 제조 공정에서 사용되어 불량품을 선별하는 방법에 적극적으로 이용될 수 있을 것이다.

직접방식 엑스선 검출기를 위한 $BiI_3$ 특성 연구 (A Study on Bismuth tri-iodide for X-ray direct and digital imagers)

  • 이상훈;김윤석;김영빈;정숙희;박지군;정원범;장무영;문치웅;남상희
    • 한국방사선학회논문지
    • /
    • 제3권2호
    • /
    • pp.27-31
    • /
    • 2009
  • 현재 의료용 엑스선 장비는 기존의 아날로그 방식의 필름, 카세트를 대신하여 디지털 방식인 CR, DR 이 널리 사용되면 그에 관한 연구개발이 활발히 진행되고 있다. 본 연구 에서는 디지털 엑스선 장비의 변환물질로 $BiI_3$(Bismuth tri-iodide)를 적용하여 실험하였으며 기존 선행연구에 비해 만족할만한 결과 값은 얻을 수 없었지만 가장 많이 사용되고 있는 a-Se(Amorphous Selenium)의 단점인 고전압인가와 제작방식의 어려움을 보완할 수 있는 새로운 가능성을 제시해 주었다. 본 연구에서 사용되어진 변환 물질은 순도 99.99%의 $BiI_3$가 이용되었으며 $3cm{\times}3cm$의 크기와 200um의 두께를 가지는 변환물질 층이 제작되었다. 변환 물질의 상하부에는 Magnetron Sputtering system장비를 이용한 ITO 전극이 형성되었다. 형성된 $BiI_3$ 엑스선 변환 물질의 특성 평가를 위해 구조적 분석과 전기적 분석이 이루어 졌다. SEM 측정을 통해 제작된 필름의 표면 및 단면적, 구성 성분을 관찰하였고, 전기적 분석을 위해서는 누설전류, 엑스선에 대한 신호량 및 잡음 대 신호비의 관찰이 이루어졌다. 실험 결과 $BiI_3$$1.6nA/cm^2$의 누설전류와 $0.629nC/cm^2$의 신호량을 측정할 수 있었으며, 이렇게 Screen print method로 제작된 엑스선 검출 물질은 PVD방법을 이용해 제작된 물질과 비슷하거나 더 나은 전기적 특성을 가지고 있었고 이는 제작 방법의 간소화 및 수율을 향상 시킬 수 있어 BiI3도 a-Se를 대체하기 위한 변환물질로 적합하다고 사료된다.

  • PDF

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

흉부 디지털 방사선 촬영 시 C-D phantom을 이용한 촬영조건에 따른 영상 평가 (Evaluation of Image According to Exposure Conditions using Contrast-Detail Phantom for Chest Digital Radiography)

  • 이인자;김유현;김창남;이창엽;박계연
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제32권1호
    • /
    • pp.25-32
    • /
    • 2009
  • 흉부 DR 촬영 시 적당한 촬영조건을 알아보기 위해 C-D phantom을 이용한 영상의 평가를 식별능과 입상성 및 선량의 관계로 알아본 결과 다음과 같은 결론을 얻었다. 1. 환자 입사선량(ESE)은 관전압이 증가됨에 따라 감소되었다. 2. 노출조건 중 관전압 변화에 따른 C-D phantom의 식별능은 110 kVp에서 가장 잘 보이는 것으로 나타났다. 3. 노출비(mAs) 변화에 따른 식별능은 낮은 노출비(0.5배)에서는 90 kVp에서 가장 잘 보였으며, 노출비가 (1.5배)인 경우 110 kVp에서 가장 잘 보임을 알 수 있었고, 노출을 많이 했을 때가 식별이 잘 됨을 알 수 있었다. 4. 관전압 110 kVp에서 노출비에 따른 입상성은 1.5배일 때가 가장 좋으며, 노출비 1.5배일 때 관전압 변화 시 입상성은 110 kVp일 때가 가장 좋다. 따라서 환자의 피폭선량(Detector에 입사되는 선량은 동일)은 kVp 증가 시 작으며, 적당한 kVp는 110, 선량비는 1.0배에 비해 1.5배로 양을 많이 주었을 때가 식별이 잘 되었고, 입상성 또한 노출비가 1.5배일 때 좋으며 관전압은 110 kVp일 때가 좋았다. 그러나 노출비를 많이 주면 환자가 받는 선량이 증가됨으로 본 연구에 의하면, 노출조건을 신중히 설정하여야 할 것이다.

  • PDF