• 한국컴퓨터정보학회논문지
• /
• 제25권9호
• /
• pp.31-36
• /
• 2020

본 연구에서는 딥러닝 처리기술을 이용한 이미지 분석을 통하여 위치정보가 없는 사진의 위치를 사용자에게 제공하는 장소이미지 수집기술을 설계하였다. 본 서비스는 사용자가 생활 중에 관심 있는 장소의 이미지 사진을 서비스에 업로드하면 해당 장소의 이름과 위치뿐만 아니라 관련 주변 정보를 확인 할 수 있는 서비스 개발을 목적으로 설계되었다. 본 연구는 이미지에 해당하는 정보를 제공하고 그 위치 정보를 기반으로 사용자가 관심 있는 주변정보를 제공할 수 있는 서비스의 기반기술이다. 이를 통하여 다양한 서비스에 활용이 가능하다.

• 한국ITS학회 논문지
• /
• 제13권4호
• /
• pp.20-29
• /
• 2014

거시적인 3대 교통변수(교통량, 속도, 밀도)와 고속도로 서비스 수준의 효과척도(밀도, 교통량 대 용량비) 모두 해당되는 변수는 밀도이다. 특히 도로의 서비스 수준을 평가함에 있어 가장 정확하고 우수한 효과척도로 알려져 있다. 이러한 중요성에도 불구하고 측정방법의 어려움으로 인해 타 변수에 비해 밀도를 활용한 연구가 상대적으로 부족하였다. 기존 밀도추정방법의 경우 측정시각에 따라 동일한 교통류의 밀도값이 변화하는 등의 한계가 있다. 본 연구에서는 서울외곽순환고속도로 사패산 터널 내부의 CCTV 영상을 정합하여 파노라마 영상을 제작한 후, 제작된 파노라마 영상을 이용하여 실제 밀도를 측정하는 방법을 연구하였다. 중심극한정리를 이용하여 분석한 결과, 1 km 사진 24개(혹은 24초)를 이용하여 밀도를 측정하면 당시 교통상황을 잘 반영할 수 있었다. 즉, 본 연구에서 제시한 밀도 수집 주기를 준수하여 수집한 구간영상으로 밀도를 측정할 경우 측정시각에 관계없이 평균적인 밀도값을 측정할 수 있으며, 현실 교통류를 대변하는 현실적인 밀도를 취득할 수 있다.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.404-412
• /
• 2017

A centrifugal cyclone dust collecting apparatus includes a hydro cyclone dust collecting apparatus for separating solid or liquid using liquid or suspension as a medium. In this study, the formation mechanism and improvement of air core and inner air layer were confirmed through Particle Image Velocimetry. These results showed that the modified experimental model was designed in the conventional method suitable for the separation of juvenile fish and eggs. The inlet speed of the multi-stage hydrocyclone dust collector, which can increase the inlet velocity and minimize floatage in the turbulence chamber, was increased from 0.15 to 0.30 m/s. As a result, the air core was stably formed, the inner air layer was increased with increasing speed. In addition, the dust collecting efficiency of egg and juvenile fish was 97.8% on average, It can infer that this system confirmed the ability to efficiently collect particles of $40{\mu}m$ or more.

• 한국통신학회논문지
• /
• 제35권4C호
• /
• pp.408-414
• /
• 2010

CCTV이미지에서 교통정보를 수집하려고 할 때 관측자가 카메라를 움직이면 설치된 검지영역이 손실되고 복원하려고 해도 기계적 오차로인해 어려움을 겪게 된다. 그래서 어안이나 거울을 이용하면 카메라를 움직이지 않아도 된다. 하지만 이러한 상황하에서 가장 큰 문제점은 영상의 왜곡이다. 본 논문에서는 이러한 왜곡을 극복하기 위해 비선형 확산 방정식을 이용한 분할과 이 영역에디포메이션을 적용하여 디블러링 한 후 차량정보 수집을 시도한 결과 이전 결과보다 5% 향상된 결과를 얻었다.

• 한국정보전자통신기술학회논문지
• /
• 제11권5호
• /
• pp.601-607
• /
• 2018

Median filtering is a nonlinear method which is known to be effective in removing impulse noise while preserving local image structure relatively well. However, it could still suffer the smearing phenomena of edges and fine details into neighbors due to undesirable influence from the pixels whose values are far off from the true value of the pixel at hand. This drawback mainly comes from the fact that median filters typically employ a regular shape window for collecting the pixels used in the filtering operation. In this paper, we propose a median filtering method which employs an irregular shape filter window in collecting neighboring pixels around the pixel to be denoised. By employing an irregular shape window, we can achieve good noise suppression while preserving image details. Experimental results have shown that our approach is superior to regular window-based methods.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.35-41
• /
• 2003

Rock mass characterization is an integral part of rock engineering design. Much of the information for rock mass characterization comes from field fracture mapping and data collecting. This paper describes two technologies that can be used to assist with the field mapping and data collecting activities associated with rock mass characterization: digital image processing and 3D laserscanning. The basis for these techniques is described, as well as the results of field case studies and an analysis of the error in estimating fracture orientation.

• 대한인간공학회지
• /
• 제34권6호
• /
• pp.583-595
• /
• 2015

Objective: The purpose of this study was to determine the reliability of lower limb joint angles computed with the software ImageJ during jumping movements. Background: Kinematics is the study of bodies in motion without regard to the forces or torques that may produce the motion. The most common method for collecting motion data uses an imaging and motion-caption system to record the 2D or 3D coordinates of markers attached to a moving object, followed by manual or automatic digitizing software. Above all, passive optical motion capture systems (e.g. Vicon system) have been regarded as the gold standards for collecting motion data. On the other hand, ImageJ is used widely for an image analysis as free software, and can collect the 2D coordinates of markers. Although much research has been carried out into the utilizations of the ImageJ software, little is known about their reliability. Method: Seven healthy female students participated as the subject in this study. Seventeen reflective markers were attached on the right and left lower limbs to measure two and three-dimensional joint angular motions. Jump performance was recorded by ten-vicon camera systems (250Hz) and one digital video camera (240Hz). The joint angles of the ankle and knee joints were calculated using 2D (ImageJ) and 3D (Vicon-MX) motion data, respectively. Results: Pearson's correlation coefficients between the two methods were calculated, and significance tests were conducted (${\alpha}=1%$). Correlation coefficients between the two were over 0.98. In Vicon-MX and ImageJ, there is no systematic error by examination of the validity using the Bland-Altman method, and all data are in the 95% limits of agreement. Conclusion: In this study, correlation coefficients are generally high, and the regression line is near the identical line. Therefore, it is considered that motion analysis using ImageJ is a useful tool for evaluation of human movements in various research areas. Application: This result can be utilized as a practical tool to analyze human performance in various fields.

• 유통과학연구
• /
• 제12권5호
• /
• pp.5-13
• /
• 2014

Purpose - We seek feasible strategies to draw customers into a state of attitudinal/behavioral loyalty through perceived quality and perceived risk in the experienced food industry. Research design, data, and methodology - We utilize the LISREL model to examine the cause and effect relationships between customer loyalty, perceived quality, perceived risk, and three marketing proposals (brand image, store image, and promotion). We employed the quota sampling method to conduct the survey questionnaires, collecting365 effective customer samples in coffee shops/stores in Taipei City. Results - We find that store image substantially benefits consumer loyalty through perceived quality. Marketing managers can enhance store environment and atmosphere to elicit both attitudinal and behavioral aspects of customer-perceived quality and loyalty. Conclusions - This is the first paper to investigate simultaneously customer loyalty across brand image, store image, and promotion/marketing proposals in the food industry. Managers can promote brand image and store image at the same time to enhance customer-perceived quality.

• 산업경영시스템학회지
• /
• 제29권2호
• /
• pp.51-57
• /
• 2006

This study is concerned with image information management system for small scale hospital. We intended to developing image management system which is used of the existing analog devices such as medical camera, supersonic analyser, endoscope etc. We developed a video in interface board based USB 2.0 for handling image in real time. It is capable of transmitting image input signal like as NTSC, PAL to personal computer through USB 2.0. The developed the board of 40 speeds compared with the exiting system based USB 1.0. Especially the developed system is very helpful for small hospital like as dental clinic, because it is easy and convenient to manage image information without expert. So it will provide reduction of time and cost for handling image information(collecting, saving, retrieval, transmitting image).

• 대한의용생체공학회:의공학회지
• /
• 제31권3호
• /
• pp.234-239
• /
• 2010

We have developed and reported several micro-spikes for minimally invasive biopsy. This paper presents a diagnosis protocol for micro-spike biopsy using paraffin-based tissue collecting tool. Using the proposed tissue collecting tool, which has a negative micro-spike structure in a porous chamber, the biopsied tissue in a micro-spike is effectively detached. The proposed diagnosis protocol prevents the loss of tissues in a paraffin embedding and sectioning process. Hence, it is compatible with conventional histopathology without additional reagents and processes. The gastro-intestinal tissue of a pig is biopsied in an in vivo environment, and then it is detached from a micro-spike using the paraffin-based tissue collecting tool. A histopathological photomicrograph of the detached tissue is acquired with the proposed diagnosis protocol. The acquired image offers clinical quality. This result shows that the paraffin-based tissue collecting tool is applicable to the medical practice.