• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2010

Most of the research in the multi-touch area is based on the FTIR(Frustrated Total Internal Re리ection), which is just implemented by using the previous approach. Moreover, there are not the software solutions to improve a performance in the multi touch-blobs detection or the user gesture recognition. Therefore, we implement a multi-touch table-top display that is based on the DI(Diffused Illumination), the improved touch-points detection and user gesture recognition. The proposed method supports a simultaneous transformation multi-touch command for objects in the running application. Also, the system latency time is reduced by the proposed ore-testing method in the multi touch-blobs detection processing. Implemented device is simulated by programming the Flash AS3 application in the TUIO(Tangible User Interface Object) environment that is based on the OSC(Open Sound Control) protocol. As a result, Our system shows the 37% system latency reduction, and is successful in the multi-touch gestures recognition.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.62-66
• /
• 2000

This study investigated the effects of certain specific wavelengths of lighting on the autonomic nervous system (ANS) using the heart rate variability (HRV) as an index. Six subjects with normal color vision participated n this study between 15:00 and 17:00 hr to neutralize any visual differences arising from circadian rhythm. The environmental conditions of the laboratory were maintained in complete darkness and the temperature was equilibrated at 24$\Box$ with a relative humidity of 60%. Subjects were only subjected to light stimulation when the pupil of dyes attained a minimum size of 2 mm by projecting illumination equalized with the same spectral radiance of 500-700 nm with 50-nm internal radiance. HRV was calculated from electrocardiogram (ECG) with systematic respiratory control at 0.35 Hz. The results suggest that illumination with certain wavelengths may induce ANS activation.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.26-27
• /
• 2012

Reflection considered as the view disturbing noise in optical systems, such as stereo camera in autonomous vehicles especially in night. Reflection caused by the street light or due to rainwater under adverse weather conditions. A blur image detected by the camera that results in wrong guidance to vehicle for detecting its track. A vehicle guidance approach through stereo vision can be same in day and night time. However it cannot be guided with same image analysis due to diverse illumination conditions. We develop the technique that shows its efficacy with illustrations of reflection removal off the camera lens and vehicle tracking control.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1736-1742
• /
• 1989

In this thesis, to verify input-output characteristics of GaAs MESFET, light is illuminated to C-band oscillator which already designed and manufactured, thus input-output variation of GaAs MESFET is to be shown. Experimental results of two kinds of optical effects, optical tuning and opticla switching, of GaAs MESFET Oscillators are presented. For optical tuning, the Oscillation frequency decreases with optical illumination and the Oscillator power output generally increases with optical illumination, the increase being around 1 to 3 dBm at 1mW/mm\ulcornerlight intensity. While the DC-lingt illuminated Oscillator response data provide information of the optical senditivity of GaAs-MESFET Oscillators. Pulse-light illuminated transient response data can be invoked to understand the detailed optical-electrical interaction mechanisms response. Thus, it is shown that direct control of micro-devices is realisable, if we use optical effect of GaAs semiconductor compound.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.625-630
• /
• 2006

A new method to get reliable viewing angle measurements on LCD reflective display is presented. This method is based on the use of commercial Fourier optics viewing angle instruments already proposed by ELDIM for more than 15 years. This apparatus is capable to measure simultaneously quasi all the incidence and azimuth angles and to control very precisely the illumination of the sample. We show that, in contrast to other instruments, a clever illumination procedure with two different conditions allows separation of the intrinsic reflective contribution of the display and of the parasitic front end reflection. In this way, intrinsic performances of the display can be obtained at any incidence and azimuth angles and realistic observer conditions can be simulated.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.500-510
• /
• 2013

In this paper, a high-sensitivity low power photodetector using double gate (DG) MOSFET is proposed for the first time using change in subthreshold current under illumination as the sensitivity parameter. An analytical model for optically controlled double gate (DG) MOSFET under illumination is developed to demonstrate that it can be used as high sensitivity photodetector and simulation results are used to validate the analytical results. Sensitivity of the device is compared with conventional bulk MOSFET and results show that DG MOSFET has higher sensitivity over bulk MOSFET due to much lower dark current obtained in DG MOSFET because of its effective gate control. Impact of the silicon film thickness and gate stack engineering is also studied on sensitivity.

• Journal of the Korea Computer Graphics Society
• /
• v.3 no.1
• /
• pp.9-15
• /
• 1997

Most rendering research has concentrated on two sub-problems: modeling the reflection of light sources, and calculating the direct and indirect illumination from light sources and other surfaces. As Kolb wrote in [1], the camera and lens model is an important key component of a rendering system. In this paper we describe a bump-mapping method using camera lens. It allows another level of control in rendering. We developed an efficient framework to develop customized bump mapping lens and combine with other sequence of lens elements to create various effects as shown in Figure 2,3,4,5.

• Journal of Plant Biology
• /
• v.29 no.4
• /
• pp.255-262
• /
• 1986

Developmental changes of chlorophyll-protein (CP)-complex and plastid membrane proteins during the greening of rape (Brassica napus L.) cotyledons were examined in order to investigate the effect of benzymladenine (BA) on plastid development. The formation of CP-complexes was slightly promoted by BA treatment in early greening stage, at 24 h and 48 h after illumination. However, BA inhibited the development of CP-complexes at 72 h after illumination. On the profiles of plastid membrane proteins with greening time, it was found that the 24 kd protein was increased and the 56 kd protein was decreased in both water control and BA-treated cotyledons. However, the above two traits were retarded under BA treatment, respectively. From the obtained result, plastid development of rape cotyledon during greening was partially affected by interaction between light and BA dependent on its physiological age.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.203-209
• /
• 2012

Visible light communications (VLC) use modern solid-state light-emitting diodes (LEDs) to broadcast information. Emerging white-light LEDs allow the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting design using one-chip-type white LEDs is proposed for efficient illumination and optical wireless communications under the existence of several obstacles. Lighting and communication performance are analyzed to show the effectiveness of the proposed LED lighting. Specifically, the signal-to-noise ratio considering intersymbol interference and the bit-error rate of variable pulse position modulation (VPPM) with dimming control are considered.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.3
• /
• pp.1-6
• /
• 2012

In this paper, inspection system based on optical scanning mechanism is designed and developed for solar cell wafer. It consists of optical scanning mechanism, NIR camera optics, machinery and control system, algorithm of defect detection and software. Optical scanning mechanism is composed of geometrical camera optics and structured hybrid illumination system. It is used to inspection of surface defects. NIR camera optics is used for inspection of defects inside solar cell wafer. It is shown that surface and internal micro defects can be detected in developed inspection system for solar cell wafer.