• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.386-394
• /
• 1987

본 연구에서는 우수한 출력성능 때문에 광범위한 범위에서 사용되고 있는 디 이젤기관을 그 대상으로 하여 실요상 보다 간편하고 액체연료만이 아니고 기체연료의 사용도 가능한 기화디이젤법, 즉 추연료로서 알코올을 흡기관으로부터 흡입시키는 한 편, 연소실내에 착화원으로서 경유를 분사시켜 알코올의 연소를 확보하도록 하는 방법 을 이용하여 기관의 연소성, 출력성능, 또는 배기특성 등에 대하여, 조사분석하여 알 코올이 대체연로로서의 이용가능성을 확고히 하고져 함에 그 목적이 있다.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.45-50
• /
• 2013

레조르시놀은 목재 및 타이어용 접착제, 합성수지 염료의 원료 등으로 널리 사용되고 있다. 이 물질은 상온에서 흰색 결정으로 분진은 공기 중에서 폭발성 혼합물을 형성할 수 있고 밀폐 공간에서 열에 노출 되었을 경우 폭발 위험성이 있다고 알려져 있다. 본 연구에서는 레조르시놀 취급시 화재 및 폭발 사고 등의 예방을 위한 해당 물질의 열분석, 열안정성, 분진폭발특성 및 최소점화에너지 등의 화재 폭발위험 특성을 평가하였다. 이들 연구결과는 레조르시놀의 사용 및 취급 시 공정의 안전 정보로 활용될 수 있을 것이다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.330-334
• /
• 2004

In this paper, we studied on the fire dispersive patterns and the fire progress at the power cord sets for low voltage appliances in the wall-model. For the experiment, we manufactured a wall-model and applied the external flame at the power cord sets. From the results, short-circuit of the power cord sets was haunted by the external flame it was disconnected with the flashing and the scattering. The fire progress on the polyvinyl chloride insulated flexibel cords is not observed because the ignition energy decreases. In case of rubber insulated flexible cords, however, the fire was progressed continuously. Molten marks were formed at a two electric wire by continuous electric discharge in power source part. A large molten mark was formed in load part. And the columnar structure and voids were observed in molten wire.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.23-27
• /
• 2014

The use of electromagnetic energy and non-equilibrium plasma for enhancing ignition and combustion stability is receiving increased attention recently. The conventional technologies have adapted the electrical devices to make the electromagnetic field, which resulted in various safety issues such as high-maintenance, additional high-cost system, electric shock and explosion. Therefore, an electrodeless microwave technology has an advantage for economic and reliability compared with conventional one because of no oxidation. However, the application of microwave has been still limited because of lack of interaction mechanism between flame and microwave. In this study, an experiment was performed with jet diffusion flames induced by microwaves to clarify the effect of microwave on the combustion stability and pollutant emissions. The results show that microwave induced flames enhanced the flame stability and blowout limit because of abundance of radical pool. However, NOx emission was increased monotonically with microwave intensity except 0.2 kW, and soot emission was reduced at the post flame region.

• Advances in Computational Design
• /
• 제4권4호
• /
• pp.367-379
• /
• 2019

Multiple Inputs and Multiple Outputs (MIMO) Fuzzy logic model is developed to predict the engine performance and emission characteristics of pongamia pinnata biodiesel with hydrogen injection. Engine performance and emission characteristics such as brake thermal efficiency (BTE), brake specific energy consumption (BSEC), hydrocarbon (HC), carbon monoxide (CO), carbon dioxide ($CO_2$) and nitrous oxides ($NO_X$) were considered. Experimental investigations were carried out by using four stroke single cylinder constant speed compression ignition engine with the rated power of 5.2 kW at variable load conditions. The performance and emission characteristics are measured using an Exhaust gas analyzer, smoke meter, piezoelectric pressure transducer and crank angle encoder for different fuel blends (Diesel, B10, B20 and B30) and engine load conditions. Fuzzy logic model uses triangular and trapezoidal membership function because of its higher predictive accuracy to predict the engine performance and emission characteristics. Computational results clearly demonstrate that, the proposed fuzzy model has produced fewer deviations and has exhibited higher predictive accuracy with acceptable determination correlation coefficients of 0.99136 to 1 with experimental values. The developed fuzzy logic model has produced good correlation between the fuzzy predicted and experimental values. So it is found to be useful for predicting the engine performance and emission characteristics with limited number of available data.

• 한국추진공학회지
• /
• 제16권4호
• /
• pp.93-98
• /
• 2012

유도탄의 저온 사출 시스템 구현에 있어서 요구된 이탈모타 개발 중 나타난 복기 추진제의 연소불안정, 특히 chuffing 현상을 해결하기 위해 시도되었던 여러 가지 기술적 접근방법과 이들의 시험 결과를 수록하였다. 본 이탈모타에서는 일반적으로 점화 에너지와 관련이 깊은 것으로 알려진 chuffing 현상이 점화 에너지의 공급량이나 공급 방법 등에 의해는 억제 효과가 나타나지 않았고, 특성길이($L^*$)의 증가 및 추진제에 감쇄 물질인 ZrC를 2% 첨가함으로써 억제되었다. 이로써 복기 추진제의 연소불안정을 해결할 수 있는 새로운 경험을 얻게 되었다.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.220-224
• /
• 2019

The aluminum (Al)/copper oxide (CuO) complex is known as the most promising material for thermite reactions, releasing a high heat and pressure through ignition or thermal heating. To improve the reaction rate and wettability for handling safety, nanosized primary particles are applied on Al/CuO composite for energetic materials in explosives or propellants. Herein, graphene oxide (GO) is adopted for the Al/CuO composites as the functional supporting materials, preventing a phase-separation between solvent and composites, leading to a significantly enhanced reactivity. The characterizations of Al/CuO decorated on GO(Al/CuO/GO) are performed through scanning electron microscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy mapping analysis. Moreover, the functional bridging between Al/CuO and GO is suggested by identifying the chemical bonding with GO in X-ray photoelectron spectroscopy analysis. The reactivity of Al/CuO/GO composites is evaluated by comparing the maximum pressure and rate of the pressure increase of Al/CuO and Al/CuO/GO. The composites with a specific concentration of GO (10 wt%) demonstrate a well-dispersed mixture in hexane solution without phase separation.

• 한국재난정보학회 논문집
• /
• 제15권3호
• /
• pp.380-390
• /
• 2019

연구목적: 최근 전기레인지의 사용증가와 더불어 화재도 증가하고 있다. 전기레인지 중 대표적인 인덕션과 하이라이트 방식에 대해 구조 및 작동방법을 알아보고 화재위험성을 살펴보고자 하였다. 연구방법: 두 방식에 대하여 연소실험, 전열실험, 발화실험 등을 실시하였다. 연구결과: 하이라이트 전기레인지는 키친타월이 2분 후 연소되었고, 조리를 마친 후 잔열이 식는데 약 25분이 소요되며, 니크롬선의 붉은 기운이 3~4분 만에 사라지고 불꽃이 보이지 않았다. 결론: 실험 결과 하이라이트 방식은 화상 및 화재 위험성이 존재하며, 특히 상판에 균열이 있을 경우 화재 및 폭발의 위험성이 있음을 알 수 있었다.

• Geosystem Engineering
• /
• 제21권5호
• /
• pp.282-290
• /
• 2018

The onset of extreme fire behaviour in a mine drift with longitudinal ventilation was analysed. A fire in a mine drift with continuous fuel load, involving several separate fires may lead to flames tilted horizontally and filling up the entire cross section. This will lead to earlier ignition, higher fire growth rate, higher fire spread rate and a severe fire behaviour. The focus has been on what changes take place at the onset and signs of the impending phenomenon. It was found that the fire gas temperature at the ceiling level provided a poor indicator. At the downstream far-field region of the fire, the sudden temperature increase at the lowest levels of the cross section and the sudden increase in flow velocities would provide signs of extreme fire behaviour. The corresponding full-scale heat release rates of the experiments at the onset of extreme fire behaviour were found to be very high for mining applications but not necessarily for tunnel fires. The heat release rate threshold for a mine drift with smaller cross-sectional dimensions would decrease considerably, increasing the likelihood of occurrence. The distance between the fuel items will play an important role during the initiation of horizontal flames.

• 한국안전학회지
• /
• 제37권6호
• /
• pp.158-165
• /
• 2022

Eco-friendly policies proposed by the government of The Republic of Korea have encouraged the use of eco-friendly vehicles. Hydrogen vehicles have exhibited the highest growth rate, although the current number of registered vehicles is low. In hydrogen vehicles, a thermally activated pressure relief device (TPRD) is installed to prevent explosions in the hydrogen gas cylinder. When discharged due to low ignition energy, hydrogen gas readily forms a jet flame. The risks induced by such jet flames were analyzed through a numerical analysis. Jet flames can activate TPRDs installed in nearby hydrogen gas cylinders. As a result, high-voltage cables exposed in the lower area of a vehicle can ignite within seconds. There was a 9.5-kW/m2 area around the vehicle (which can result in casualties) at a distance of ~5 m from the hydrogen gas cylinder, and a 37.5-kW/m2 area (which can cause significant damage) in the form of an inverted triangle toward the lower section of the vehicle. We believe that the risk factors analyzed herein should be considered for addressing accidents in hydrogen vehicles.