• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.233-244
• /
• 2012

Goseong bay, located in southeast sea of Korea with an area of 2,100 ha, is a semi-enclosed bay well-known for oyster farming cultured in an extended range of 148 ha. The objective of this study is to provide the fundamental data in order to manage the effective sea area. A total 26 of surface sediment were collected from Goseong bay to evaluate their sedimentary environment and heavy metals. The loss on Ignition (LOI), C/N ratio, acid volatile sulfide (AVS) and heavy metals were analyzed. loss on ignition (LOI) of surface sediment range from 1.00% to 3.03% (average 2.00%). The carbonate content ranges from 0.52% to 4.29% (average 2.37%). C/N ratio of organic matter showed that most part of organic matter comes from neighboring continent. Acid volatile sulfide (AVS) value of surface sediment from 0.02 mg/g to 1.43 mg/g (average 0.24 mg/g). A ten element of surface sediments (Al, As, Cd, Cr, Cu, Hg, Ni, Pb, V, Zn) were calculated by enrichment factor (Ef) and the results show that some areas are highly polluted with respect Cu and Hg. The correlation matrix displays the existence of remarkable levels of correlation with both positive and negative values among different variable pairs. LOI and AVS showed both positive values. LOI and AVS values falls under 2% and 1%. Therefore, Goseong bay showed good in quality of sediment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.

• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.51-63
• /
• 2013

To assess the effect of environmental factors on the sustainability of cultured production shellfish, we investigated the habitat characteristics of tidal flat (Namhae-po in Taean). We measured the physiochemical parameters (temperature, salanity, pH, dissolved oxygen and nutrients) and the geochemical characteristics (chemical oxygen demand, ignition loss, C/N ratio and C/S ratio). Surface sediments were collected from several site of tidal flat to examine the geochemical characteristics of both the benthic environment and heavy metal pollution. The grain size for research area of tidal flat were similar at the ratio of silt and clay in comparison with the other site of it. The C/N ratio was more than 5.0, reflecting the range arising from the mix of marine organism and organic matter. The C/S ratio (about 2.8) showed that survey area had anoxic or sub-anoxic bottom conditions. The enrichment factor (Ef) and index of accumulation rate (Igeo) of the metals showed that those research areas can be classified as heavily polluted, heavily to moderately polluted, or more or less unpolluted, respectively. Adult surf clam (Mactra veneriformis) density was highest at St. 2 (middle part of the Namhae-po), on the other hand, surf clam spat density was highest at St. 3 (lower part of the Namhae-po). Heavy rain, terrigenous suspended clay with fresh water from neighboring agricultural land, and severe high air temperature during summer could be thought as detrimental causes of spat and adult mortality in Namhae-po tidal flat. We suggested that the growth of shellfish in the tidal flat was effected by the various environmental conditions, so an improvement in the cultured method was needed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.3
• /
• pp.100-117
• /
• 2022

This study examines the spatio-temporal characteristics of the macrobenthic community in the coastal areas of South Korea for the past six years(2015-2020). The relationship between the number of individuals of macrobenthic species and the benthic environments were investigated using data collected at a total of 154 stations located in the West (70), the South (61), and the East Seas (23), except for the Jeju Sea. We examined the benthic environmental characteristics such as water depth, sediment, grain size, ignition loss, and total organic carbon. A total of 1,614 macrobenthic species were found in the coastal area, with a mean density of 0.62 ind./m² by station. The mean density was relatively high in the spring and summer seasons (May to August) with more than 450 species. The most dominant species belong to Polychaetes and the top five of them accounted for more than 20% of the total number of populations. The top five species were Heteromastus filiformis, Scoletoma longifolia, Sigambra tentaculata, Sternaspis scutata, and Notomastus latericeus. Cluster analysis was performed on the top five dominant species. The stations were clustered into three groups with similar locations on the West, South, and East Sea. Cluster 1 and 3 represent Heteromastus filiformis (44% each), but cluster 2 represents Scoletoma longifolia (66%). Each cluster has different benthic environmental characteristics, especially in the sediment's sand (31.0%, 51.9%) and clay (15.9%, 9.7%) contents.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.165-171
• /
• 2010

The Homogeneous Charge Compression Ignition (HCCI) engine concept allows for both NOx and particulate matter to be reduced simultaneously, and it is a promising way to meet the next environmental challenges. Unfortunately, HCCI combustion often increases CO and HC emissions. The development of oxidation catalyst (OC) requires high conversion efficiency for CO and HC at low temperature. Conventional oxidation catalyst technologies may not be able to convert these emissions because of the saturation of active catalytic sites. The OC used in this study was 600 cpsi cordierite. Three kinds of OC with different amounts of Pt and Pd were used. The influence of the space velocity (SV), $H_2O$ and $O_2$ concentration was also studied. All types of OCs were found to have over 90% CO conversion efficiencies at $170^{\circ}C$. When in the presence of water vapor, CO conversion was increased, but $C_3H_8$ conversion was decreased. The performance of the OC was not influenced by initial the HC concentration. The 2Pt/Pd catalyst was better in terms of thermal aging than the Pt-only catalyst. The $LOT_{50}$ of both fresh and aged OC was increased with increasing SV and with the presence of $H_2O$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.501-511
• /
• 2014

Bio-oil derived from biomass through fast pyrolysis process has the potential to displace a significant amount of petroleum fuels. However, the use of bio-oil in a diesel engine is very limited because of its poor properties, e.g., its low energy density, low cetane number, and high viscosity. Therefore, bio-oil should be emulsified or blended with other fuels that have high centane numbers. Because bio-oil has poor miscibility with petroleum fuels, the most suitable candidate fuels for direct mixing are alcohol fuels. In this study, bio-oil was blended with ethanol, and two types of cetane improvers were added to a blended fuel to improve the self-ignition property. The two types of cetane improvers, PEG 400 and 2-EHN, made it possible for bio-oil blended fuels to combust in a diesel engine with a maximum bio-oil content of 15 wt%. A high-compression-ratio piston is also proposed for the combustion of bio-oil in a diesel engine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.154-160
• /
• 2020

This study analyzed the fire intensity according to the zones classification between traditional market stores using FDS software. Modeling was conducted for the Seomoon traditional market district 4 at Daegu, which places combustibles, such as textiles and clothing near the passageway. The first ignition point assumed a short circuit fire situation at the fourth store combustible. The analysis was conducted under similar conditions as the fire situation in 2016. When there was no section wall, the fire spread rapidly through radiation in all directions from the fire-origin point. After 600 seconds, the mall was burnt to the ground. When section walls were present, however, the fire could be restricted inside the compartment. The first intensity of the two analysis conditions was predicted from the total heat energy from 200 seconds (X₁) to 600 seconds (X₂), where the heat generation rate began to increase rapidly. As a result of installing section walls near the fire point, heat energy generation of approximately 11.12 MW (55.68 %) was delayed. Further analysis of smoke control, according to the section wall arrangement and re-installation facilities, will be needed to study the characteristics of fire in traditional markets comprehensively.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.25-30
• /
• 2017

Because of the vertical combustion characteristics of combustible substances, accurate substance safety information for their safe use, handling and transportation is essential. The flash point, fire point, explosion limits and autoignition temperature (AIT) are important safety parameters which need special attention in chemical plants and laboratories that handle dangerous materials. In this study, tert-butylbenzene which is widely used as an intermediate material in the chemical industry was selected. For the reliability of the flammable properties of tert-butylbenzene, this study was investigated the explosion limits of tert-butylbenzene in the reference data. The flash points, fire points and AITs by the ignition delay time for tert-butylbenzene were experimented. The lower flash points of tert-butylbenzene by using the Setaflash and Pensky-Martens closed-cup testers measured $39^{\circ}C$ and $44^{\circ}C$, respectively. The flash points of tert-butylbenzene by using the Tag and Cleveland open cup testers are measured $51^{\circ}C$ and $54^{\circ}C$. And the fire points of tert-butylbenzene by the Tag and Cleveland open cup testers were $54^{\circ}C$ and $58^{\circ}C$ respectively. The AIT of tert-butylbenzene measured by the ASTM 659E tester was measured as $450^{\circ}C$. The lower explosion limit of $39^{\circ}C$ which measured by the Setaflash flash point tester was calculated to be 0.68 vol%.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.421-428
• /
• 2014

Total 20 surface sediments were collected in Anjung bay to investigate the physicochemical environment and heavy metal contents. The physicochemical investigation ranged from 6.41% to 11.68% (average $9.52{\pm}1.28%$) for ignition loss (IL), from 17.99 mg/g to 43.84 mg/g (average $27.53{\pm}6.39mg/g$) for chemical oxygen demand (COD), and from 0.05 mg/g to 0.61 mg/g (average $0.17{\pm}0.14mg/g$) for acid volatile sulfide (AVS) with significant correlation between water content (W/C) and COD. A contour of spatial distribution indicated higher organic pollution at the bottom of ascidian, Stylea clava, cultural waters. Most of metals contents was not exceeded the NOAA's effect range-low (ERL). Estimated enrichment factor (EF) ranging 0.96-1.12 indicated that the sediment environment of the studied waters was relatively pristine from heavy metal pollution in spite of increased vessel traffics, so far.

• Journal of Ecology and Environment
• /
• v.34 no.2
• /
• pp.223-235
• /
• 2011

Juncus effusus is mostly found in freshwater wetlands and is widely used for landscaping and creating artificial wetlands due to its high ecological value. J. effusus tends to dominate during the early stage (3-10 years) of the second succession in abandoned paddy fields. This study focused on the environmental characteristics of J. effusus to create habitat for an endangered species, Nannopya pygmaea, which lives in wetlands dominated by J. effusus. Considering the distribution of J. effusus and N. pygmaea, 63 quadrats at eight wetlands were investigated between May and June 2006 during the critically dry period. Fifty-three species from 28 families co-occurred with J. effusus, and Persicaria thunbergii was the most abundant (63.5%). The optimal ranges of distribution (ORD) for the water variables were water depth, -2 to 10 cm; dissolved oxygen, 0.99-3.55 mg/kg, conductivity (CON), 23.40-115.40 ${\mu}s/cm$, total dissolved solid, 12.53-57.60 mg/L; pH, 5.00-6.87; $K^+$, 0.11-1.46 mg/L; $Ca^{2+}$, 1.53-5.85 mg/L; $Na^+$, 3.16-7.47 mg/L; $Mg^{2+}$, 0.11-1.96 mg/L; $NO_3$-N, < 0.001-0.072 mg/L; $NH_4$-N, 0.005-0.097 mg/L; and $PO_4$-P, 0.006-0.047 mg/L. ORDs for the soil variables were water content, 1.05-2.96%; loss-on ignition method (LOI), 5.07-7.81%; CON, 23.70-59.70 ${\mu}s/cm$; pH, 4.40-5.16; extracted (e) $K^+$, 4.34-15.73 cmol/kg; $eCa^{2+}$, 31.56-191.56 cmol/kg; $eNa^+$, < 0.01-2.61 cmol/kg; eMg, 0.04-19.82 cmol/kg; $eNO_3$-N, 0.514-1.175 mg/kg; $eNH_4$-N, 0.033-0.974 mg/kg, $ePO_4$-P, 0.491-11.552 mg/kg; total nitrogen, 0.016-0.200%; and total carbon, 1.06-2.37%. The appearance of rush during early succession indicated relatively lower levels of these physicochemical parameters, and that ORDs should be maintained for the J. effusus community.