• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.6
• /
• pp.620-627
• /
• 2009

Shaking table test was carried out to obtain dynamic characteristics of TLCDs with uniform and non-uniform sections for both horizontal and vertical tubes. The input to the table is harmonic acceleration with constant magnitude. The output is horizontal dynamic force which is measured by load cell installed below the TLCD. Transfer functions are experimentally obtained using the ratio of input and output. Natural frequency, the most important design factor, is compared to that by theoretical equation for TLCDs with five different water levels. System identification process is performed for experimentally obtained transfer functions to find the dynamic characteristics of head loss coefficient and effective mass of TLCDs. It is found that their magnitudes are larger for a TLCD with non-uniform section than with uniform section and natural frequencies are close to theoretical ones.

• Journal of Korean Society of Forest Science
• /
• v.78 no.2
• /
• pp.132-142
• /
• 1989

The pollen morphology of 15 species, 2 varieties and 1 forma belonging to 6 sections of the subgenus Salix was investigated by means of light and scanning electron microscopy. From a pollen-morphological point of view, subgenus Salix is stenopalynous. Species from six sections have been distinguished on the basis of pollen morphology, and a key for their identification using pollen is presented. Based on pollen morphology, S. jessoensis(section Subalbae) is the most distinct of the species studied. Species of section Hurmboldtianae appear to be the most evolved in this subgenus with a closer relationship to section Amygdalinae than any other section of this subgenus.

• Smart Structures and Systems
• /
• v.6 no.7
• /
• pp.835-849
• /
• 2010

This study investigated propagation characteristics of piezo-activated guided waves in an aluminium rectangular-section tube for the purpose of damage identification. Changes in propagating velocity and amplitude of the first wave packet in acquired signals were observed in the frequency range from 50 to 250 kHz. The difference in guided wave propagation between rectangular- and circular-section tubes was examined using finite element simulation, demonstrating a great challenge in interpretation of guided wave signals in rectangular-section tubes. An active sensor network, consisting of nine PZT elements bonded on different surfaces of the tube, was configured to collect the wave signals scattered from through-thickness holes of different diameters. It was found that guided waves were capable of propagating across the sharp tube curvatures while retaining sensitivity to damage, even that not located on the surfaces where actuators/sensors were attached. Signal correlation between the intact and damaged structures was evaluated with the assistance of a concept of digital damage fingerprints (DDFs). The probability of the presence of damage on the unfolded tube surface was thus obtained, by which means the position of damage was identified with good accuracy.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.4
• /
• pp.47-55
• /
• 2009

The purpose of this study is to verify the transfer function of input acceleration and output control force by linearizing a velocity-dependent damping term of Liquid Column Vibration Absorber (LCVA). Analytical and experimental research is conducted to identify natural frequency, damping ratio and participated mass ratio of LCVA with various section ratios of vertical and horizontal areas. Findings obtained experimentally by the shaking table test are compared with analytical findings using optimization technique with constraints. The results indicate that the level of liquid and section ratio of LCVA affect the characteristics of damping ratio and mass ratio. Damping and mass ratio increase as the section of vertical column of LCVA decreases, due to turbulence in the elbow of LCVA.

• Korean Journal of Plant Taxonomy
• /
• v.46 no.4
• /
• pp.392-404
• /
• 2016

The anatomical characters of the 19 taxa of Korean Juncus were reviewed in order to examine their significance in taxonomy. Cross-section analyses were conducted on the stem, leaf, and capsule. Descriptions, line drawings, tables, and a species key of Korean Juncus are provided for species identification based on anatomical characters. The results of this study showed that the arrangements of the vascular bundle, fiber, and air-space structure in the stems as well as the arrangements of the vascular bundle and parenchyma in the leaves and the development of placenta in capsules are the key characters to be used when classifying each species of Juncus. It was revealed that the studied anatomical features were more useful for identification at the subgenera and section levels than at the species level. Therefore, these anatomical characters used in conjunction with external morphological features will make a valuable contribution to establishing a natural classification system for Juncus.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.108-116
• /
• 2014

With the increasing the importance of emotional quality of vehicle, the sound quality of systems with electric motor components has become increasingly important. Electric motors are used for windows, seats, sun roof, mirrors, steering columns, windshield wiper and climate control blowers, etc. In this paper, a study was conducted to identify sound quality factors that contribute to customer's satisfaction and preference of the window lift system. Jury test for subjective evaluation was carried out and sound quality index was developed. Averaged sound pressure level and sharpness were significant factors when glass moves down. Also, maximum loudness at stop section and averaged loudness were significant factor when glass moves up. Next, noise source identification was carried out using beam forming method during glass transferred section and impulsive noise at stop section. Several improvement methods were applied using the source identification result. And finally, the degree of sound quality improvement was judged using sound quality index.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.67-74
• /
• 2008

Even though the efficiency of a point based black spot improvement project has been low, none of solid methodology, which is based on section not point, and is considered as one of the promising substitute, has not been come up with yet. Thus, this research aims at proposing the adequate length of a hazardous section and a method to set segment length over which the project needs to be performed on rural highways by analyzing the distances from project-conducted sites to new black spots in the following year and distances between project needed but not conducted sites and new black spots in the following year. According to the analysis, the probability of being a new black spot near the project conducted intersection is higher than that of a non-conducted intersection within 2km, however, no strong relationships between project types and distance distribution have been found. Based on those findings, a method to determine the target segment including adjacent black spots within 2 kilometers-range was proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.796-806
• /
• 2009

This paper presents the method of emergency warning system operation based on T-DMB and the design of T-DMB AEAS receiver model. The proposed receiver model compares the geographical location of emergency with the location of DMB transmitting station from T-DMB broadcasting signal and classifies the receiver location into alert region, neighboring region and non-alert region and transmits the emergency alert message according to each region. The geographical location of emergency can be obtained from FIG 5/2 EWS data field for AEAS message and the location of DMB transmitting station can be estimated from either the latitude and the longitude in main identifier and sub identifier in FIG 0/22 data filed for TII(Transmitter Identification Information) or TII distribution database. In our experiment, we implemented the proposed receiver model with display section, storage section, DMB module for receiving broadcasting signal and control section and performed test emergency alert broadcasting using T-DMB signal generator.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1636-1647
• /
• 1997

As most of today's automatic transmissions in passenger car adopt a electro-hydraulic control system, the role of electronically controlled solenoid valves occupies an important position and it is essential to predict solenoid transient characteristics in order to design and evaluate the performance of the hydraulic control system. However, in general, both the magnetic and electrical parameters f the solenoid system are hardly known and it is not easy to model this section with moderate complexity although mechanical system could be developed using the classical second order system. This paper presents a dynamic modelling technique of a solenoid valve, that is controlled by pulse width modulation for an automatic transmission, in terms of system identification theory. In nonlinear computer simulation, it is shown that the identified systems which produce magnetic force to input duty cycle for various excitation signals predict the static and dynamic performance very well near the operating point and in experiment conducted to confirm the validity of identification theory for PWM solenoid valve, we find that there is a good agreement between the experimental data and simulation result. Hence, this model can be utilized in the development of pressure control system with PWM solenoid valve.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.147-152
• /
• 2005

This study firstly developed a tool for evaluating performance requirements of automatic vehicle identification (AVI) techniques. A microscopic traffic simulator, Paramics, was employed to investigate the effects of AVI performances on the accuracy of estimating section travel times. Mote Carlo simulation approach was incorporated into Paramics to conduct systematic evaluations of identifying required AVI performances. The proposed method in this study can serve as a logical and necessary precursor to field implementation of a variety of AVI techniques toward achieving more reliable traffic information.