• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.157-161
• /
• 2000

The electronic ballasts for low pressure discharge lamps are produced and commercialized. However, the electronic ballasts for high pressure lamps are now in progress because of poor reliability and high cost. The major case of troubles with electronic ballasts are thermal destruction of semiconductor output switches due to non ideal i-v characteristics of switch. The loss converts to heat and rises the temperature of switch and it increases proportionally to switching frequency and value of current and voltage. This study shows the variable frequency ballasts which can suppress the heating of switches efficiently. It is used for the limitation the switch current and the rising temperature of switch by impedance variation of lamp inductor. As a result, initial warm-up time of the proposed ballasts was faster than that of magnetic ballasts about 90 msec. Power factor of tested ballasts follow as ; input and output average of magnetic ballasts are 93 [%] and 86 [%], respectively, And proposed ballasts are 97 [%] and 99 [%], respectively.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.141-144
• /
• 2007

Polypyrrole(PPy) was composite with MWNT to attain cycle stable by chemical method. We have been considered PPy is the ideal material for high energy density electrochemical capacitor due to pseudo capacitor reaction. In this study we found that increase in cycle life due to composite MWNT. Also PPy/MWNT composite material have resulted larger capacitance and exhibits better electrochemical behavior. The structural feature was investigated by using SEM and TEM. The PPy/CNT composite is not only a promising ultracapacitor material for energy storages but also has a good possibility because of its great capacitive properties, simple preparation and low cost.

• Korean Journal of Poultry Science
• /
• v.28 no.2
• /
• pp.165-172
• /
• 2001

Vaccination is one of the most important and cost-effective methods of preventing infectious diseases. Over the past decade, scientific in molecular biology and immunology have improved understanding of many diseases and led to the development of novel strategies for vaccination. An ideal vaccine would induce effective immunity specific for the type of infection, have long duration, require minimal or no boosters, have safety, would not induce adverse reaction, and be easy to administer. The desire to meet these criteria has resulted in the development of vaccines that do not depend on the use of the viable disease agent. It is not the intent of this review to give an extensive review of the field of vaccinology, but rather to address characteristics of conventional and genetically engineered vaccines.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.4
• /
• pp.69-78
• /
• 2002

The basic purpose of the JIT(Just In Time) production system is to increase profits by reducing costs-that is, by completely eliminating waste such as excessive stocks or workforce. To achieve cost reduction, Production must promptly and flexibly adapt to changes in market demand without having wasteful slacks. :iuch an ideal is accomplished by the concept of JIT, producing the necessary items in the necessary quantities at the necessary time. The JIT production system is supported by the following: reduction of setup time, smoothing of production, standardization of jobs, improvement activities, design of machine layout, Kanban system, autonomation etc. This study examined the present state of the domestic JIT production system and introduced the empirical case of JIT application a small and medium manufacturing company. A synthetic resins manufacturing company applied JIT principles to its processes and achieved the great performance.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1769-1774
• /
• 2003

Reverse Engineering has wasted high cost and much of time because there were few softwares for supporting post-process of 3D scanning efficiently. However today Reverse Engineering is attracted by various researchers on a count of its practical use and gradually improved quality. Accordingly, many industries induce the technology of Reverse Engineering. For keeping with this general trend, the algorithms of generating meshes from 3D scanning data and visualizing their cross section are suggested in this research. It is expected that output data from the algorithms can be used in inspecting errors between product designs and their final products, and in finding a way to improve quality by considering ideal model data.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.460-460
• /
• 2014

Organic photovoltaic cells (OPV) have been extensively studied due to their unique properties such as flexibility, light-weight, easy processability, cost-effectiveness, and being environmental friendly. These advantages make them an attractive candidate for application in various novel fields and promising development with new features. Photovoltaic cell-integrated textiles have greatly attractive features as a power source for the smart textile solutions, and OPV is most ideal form factor due to advantage of flexibility. In this study, we develop a textile-based OPV through various experimental methods and we suggest the direction for the design of the photovoltaic textile. We used a textile electrode and tried to various layouts for textile-based OPV. Finally, we determined the contact area by using Hertzian theory for the calculation of power conversion efficiency (PCE). Based on the results of calculation, the short circuit current density, Isc, was $13.11mA/cm^2$ under AM 1.5condition and the PCE was around 2.5%.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.330-333
• /
• 2002

The design of high power electronic circuits and the verification of the design by practical experiments are time and cost consuming. Recently power circuit simulation technique is developing to do it easily. However, most of the simulation has used the ideal switch model consists of passive component that can not describe the physical characteristics of semiconductor devices and cannot describe the switching transient state. For the design of such power electronic circuits by the simulation, the switching transients are very important. Therefore the simulation models must describe the switching transient and the stationary behavior as precisely as possible on the hand and as fast as possible the other hand. This paper introduces the application of the physical models of power devices that are developed by TUM(Technical University of Munich, Germany) for the power electronic circuit analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.986-990
• /
• 2002

Dual Mass Flywheel(DMF) is used in order to improve the vibration characteristics of drivetrain of manual transmission vehicles. Regardless of its complexity and high cost, application of DMF is keep increasing due to a trend of using Diesel engines in passenger cars and light weight design of drivetrains. Modeling and analysis of DMF is rather simple, but finding out optimum parameters of damper may not be easy. Furthermore, its realization in DMF has some limitations due to DMF's structure and its structure dependent damping characteristics. Requirements on spring-damper characteristics of DMF has been reviewed and investigations on structures and damping characteristics of currently Produced DMFs have been made in this paper. Also, ideal spring and damper characteristics has been proposed based on such investigations.

• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.757-759
• /
• 2005

Acquired defects involving exposed bone on the forehead is challenging to reconstruct. Skin expansion provides an ideal thin flap for forehead aesthetic unit, but it takes long time and high cost, and many patients are dissatisfied at their figures. Free flap can provide enough tissue immediately, but it takes long time and has the risk of mismatches of color and texture. This report details our experiences with two patients who had soft tissue defect on their forehead that was covered with remnant forehead flap unit. This method uses one-unit-forehead island flap based on supratrochlear and supraorbital vessel. We obtained satisfactory results in terms of aesthetic and functional consideration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.6
• /
• pp.497-502
• /
• 2013

In this paper, we aim to evaluate the performance of the digital signal processing (DSP) algorithm used in [8] in order to improve the resolution of spectrometers with fixed number of low-cost, non-ideal filters. In such spectrometers, the resolution is limited by the number of filters. We aim to demonstrate via new experiments that the resolution improvement by six times over the conventional limit is possible by using the DSP algorithm as claimed by [8].