• Journal of the Korean Society of Costume
• /
• v.41
• /
• pp.185-206
• /
• 1998

The purpose of this study was to improve productivity for maximum effects with the present equipments and staff. This study compared and analyzed the mea-sured time by using stop watch method and MTM, which was the new measuring method. The flow and results of this study were as follows: 1. This study investigated the theoretical background the efficiency for production management, and the way of productivity improvement through documentary research. 2. Setting up the standard flow on the experi-mental company production, making out a process chart and measuring the actual working hour. 3. The study measured the allowance time applying work sampling. 4. Each process of the movement analysis was filmed by video to use basic data. 5. MTM analysis was taken by choosing 10 processes from front bodice according to the basic movement of MTM. Through the results, this study exclude unneccesary movements and suggest a method for working ways. 6. Using the actual working hour measured by a stop watch calculated the pitch time and presumed the amount of daily productivity. 7. The result of the work sampling came out as 38% of allowance rate. It was 13% higher than the standard amount of woman's jacket allowance rate, which was 25%. The most influencing factor was work discussion. That was because there were commuication problem of the work way between the operator and leader. More adequate use of flow table and level passing table was needed. There were the problems that inappropriate places and sizes made the distance of movements longer and often needed more adjustment of works and surroundings. To prevent breakdowns equipments check ups were necessary before works. 8. The results of MTM analysis were as follow : the time was reduced 40% than the actual measured time by a stop watch. This was because the leveling of the operator was included in the real calculation. Also, leveling was included in MTM analysis and all the conditions were standarized. Therefore MTM method was a scientidic measuring way of establishing the standard time. The presented method of this study, suggested an ideal method eliminating unneccesary motions, and presented standardization of works. Improvement of working methods, work condition and simplifying motions in each 10 processes reduced the working time from total 656 seconds to 301 seconds. 9. The way and time of working was linked together in the MTM analysis methods. Thus data from MTM help suggest not only establishing standard time but also establishing stan-dard work. Plus it includes various ability for improvements of working ways. So it is an objective method which can be widely used in other work studies. 10. The function of a time study is to determine the amount of work produced with a given method. The work rate is used to establish the cost of labor. The wage of worker must be calculated per unit time which is deter-mined before the time study is made. This study tried to introduce the incentive rule for deciding wages according to the standard time by MTM method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1638-1652
• /
• 2000

Prolific females require better nutrition and feeding practice because of larger litter size and the substantial decline in body fat. Life-time pig output will be compromised if body protein and fat are not properly managed. First litter females are especially vulnerable because they can loose ${\geq}15%$ of whole-body protein. Conservation of body protein mass during first lactation minimizes wean to estrus interval and increases second litter size (up to 1.2 pigs). The ability to influence litter-size by amino acid nutrition is a new dimension in our understanding. A P2 fat depth below 12 mm at farrow and below 10 mm at wean compromised wean to estrus interval (>2 d) and next litter size (0.5 to 1.5 pigs) in sows. It is now clear that a 'modest' excess of feed during the first 72 h of pregnancy decreases embryo viability so that the potential for an increased litter size at birth is not realized. The capacity for milk production by prolific young sows is 25% higher than the standard used previously (NRC, 1988). First litter females averaged 9.82 kg milk/d for a 21 d lactation. Second and third litter counterparts averaged 10.35 kg/d. Milk production was 95% of peak by 10 d of lactation and sows were in greatest negative energy and lysine balance during the first 6 d. Nearly 45% of the total loss in body protein occurred within the first 6 d, but this could reduced to 30-35% by using a more aggressive feeding strategy after parturition. There appear to be 2 phases in lactation for lysine need (d 2-12 vs 12-21). Feeding to the higher level alleviates the second litter size decline. The lysine requirement for lactation can be predicted with accuracy, but we are not able to predict the second limiting amino acid. Mammary uptake of valine relative to lysine and recent work with practical diets suggest that the recent NRC (1998) pattern is realistic and that threonine and valine could be co-limiting for corn-soy diets for prolific sows nursing 10-11 pigs. Empirical studies are needed to refine the ideal pattern so that synthetic lysine can be used with more confidence. Milk fat output for the elite sow is extraordinary and poses an unnecessarily high energetic cost. Methods that reduce mammary fat synthesis will benefit the sow and may enhance piglet growth.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.12
• /
• pp.1664-1672
• /
• 2014

In this study, a fibrous bed bioreactor (FBB) was used for $\small{D}$-lactic acid ($\small{D}$-LA) production by Sporolactobacillus inulinus Y2-8. Corn flour hydrolyzed with ${\alpha}$-amylase and saccharifying enzyme was used as a cost-efficient and nutrient-rich substrate for $\small{D}$-LA production. A maximal starch conversion rate of 93.78% was obtained. The optimum pH for $\small{D}$-LA production was determined to be 6.5. Ammonia water was determined to be an ideal neutralizing agent, which improved the $\small{D}$-LA production and purification processes. Batch fermentation and fed-batch fermentation, with both free cells and immobilized cells, were compared to highlight the advantages of FBB fermentation. In batch mode, the $\small{D}$-LA production rate of FBB fermentation was 1.62 g/l/h, which was 37.29% higher than that of free-cell fermentation, and the $\small{D}$-LA optical purities of the two fermentation methods were above 99.00%. In fe$\small{D}$-batch mode, the maximum $\small{D}$-LA concentration attained by FBB fermentation was 218.8 g/l, which was 37.67% higher than that of free-cell fermentation. Repeate$\small{D}$-batch fermentation was performed to determine the long-term performance of the FBB system, and the data indicated that the average $\small{D}$-LA production rate was 1.62 g/l/h and the average yield was 0.98 g/g. Thus, hydrolyzed corn flour fermented by S. inulinus Y2-8 in a FBB may be used for improving $\small{D}$-LA fermentation by using ammonia water as the neutralizing agent.

• Geophysics and Geophysical Exploration
• /
• v.23 no.3
• /
• pp.131-140
• /
• 2020

In training a classification model using machine learning, the acquisition of training data is a very important stage, because the amount and quality of the training data greatly influence the model performance. However, when the cost of obtaining data is so high that it is difficult to build ideal training data, the number of samples for each class may be acquired very differently, and a serious data-imbalance problem can occur. If such a problem occurs in the training data, all classes are not trained equally, and classes containing relatively few data will have significantly lower recall values. Additionally, the reliability of evaluation indices such as accuracy and precision will be reduced. Therefore, this study sought to overcome the problem of data imbalance in two stages. First, we introduced weighted accuracy and weighted precision as new evaluation indices that can take into account a data-imbalance ratio by modifying conventional measures of accuracy and precision. Next, oversampling was performed to balance weighted precision and recall among classes. We verified the algorithm by applying it to the problem of facies classification. As a result, the imbalance between majority and minority classes was greatly mitigated, and the boundaries between classes could be more clearly identified.

• Journal of the Korean Society of Radiology
• /
• v.6 no.4
• /
• pp.291-298
• /
• 2012

Department of radiology implements the hospital-based clinical training to accept medical treatment techniques and to adapt experiences for students. However, it might cause negative effects to training education, leading to doubt about major and pressure about training as lots of students experience clinical treatment and complex stress in unfamiliar environment. Regarding this, pressure element that students can experience and diverse variables of training were compared and analyzed. With students in department of radiology for 6 colleges and universities, from September 15th to October 25th in 2011. The degree of stress for students in training was shown high in the fields of cost(3.06) and trainers(3.02). Value and ideal(2.94), role and experiment(2.93), training environment(2.74) and relationships among trainees(2.64) were followed in the order. Except expense regarding stress from clinical training, but in all factors, women showed higher pressure level than men(P<.05) and in stress range according to BEPSI-K, a meaningful difference was shown in fields of training environment, relationships among trainees and role and experiment(P<.01, P<.001, P<.05). Therefore, It has been confirmed that there is correlation between stress of students and satisfaction for clinical training with each other closely.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.152-158
• /
• 2016

Nitrogen oxide is generated by the chemical reaction of oxygen and nitrogen in higher temperature environment of combustion facilities. The NOx reduction equipment is generally used in the power plant or incineration plant and it causes enormous cost for the construction and maintenance. The flue gas recirculation method is commonly adopted for the reduction of NOx formation in the combustion facilities. In the present study, the computational fluid dynamic analysis was accomplished to elucidated the cold flow characteristics in the flue gas recirculation burner with coanda nozzles in the flue gas recirculation pipe. The inlet and outlet of flue gas recirculation pipes are directed toward the tangential direction of circular burner not toward the center of burner. The swirling flow is formed in the burner and it causes the reverse flow in the burner. The ratio of flue gas recirculation flow rate with the air flow rate was about 2.5 for the case with the coanda nozzle gap, 0.5mm and it was 1.5 for the case with the gap, 1.0mm. With the same coanda nozzle gap, the flue gas recirculation flow rate ratio had a little increase when the air flow rate changes from 1.1 to 2.2 times of ideal air flow rate.

• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.633-640
• /
• 2012

White light and compound light were found to be the ideal light sources for improving the functionality and ornamental value of indoor plants and reducing the cost of maintenance, but because compound light hinders people from recognizing the original color of plants and makes their eyes easily tired, white light was considered the optimal light satisfying all of the ornamental value, economic efficiency and functionality resulting from plant growth. On the other hand, in the results of examining physiological changes before and after treatment on fine dust PM10 and carbon dioxide removal capacity in a closed chamber under an artificial light source, the patterns of carbon dioxide and fine dust removal were similar among the treatment groups according to light condition, but according to plant type, the removal rate per unit leaf area was highest in $Spathiphyllum$ and lowest in $Dieffenbachia$. In the experiment on dust and carbon dioxide removal, the photosynthetic rate was over 2 times higher after the treatment, and the rate increased particularly markedly under compound light and white light, suggesting that the photosynthetic rate of plants increases differently according to light quality. These results show that light quality has a significant effect on the photosynthetic rate of plants, and suggests that plants with a high photosynthetic rate also have a high carbon dioxide and dust removal capacity. In conclusion, the photosynthetic rate of foliage plants increased under white and blue light that affect photosynthesis and the increased photosynthetic rate reduced carbon dioxide and fine dust, and therefore white and compound light were found to be the optimal light sources most functional and economically efficient in improving ornamental value and indoor air quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.3
• /
• pp.433-442
• /
• 2013

This study aimed to compare the dynamics of air temperature and velocity under two different ventilation and housing systems during summer and winter in Korea. The $NH_3$ concentration of both housing systems was also investigated in relation to the pig's growth. The ventilation systems used were; negative pressure type for the enclosed pig house (EPH) and natural airflow for the conventional pig house (CPH). Against a highly fluctuating outdoor temperature, the EPH was able to maintain a stable temperature at 24.8 to $29.1^{\circ}C$ during summer and 17.9 to $23.1^{\circ}C$ during winter whilst the CPH had a wider temperature variance during summer at 24.7 to $32.3^{\circ}C$. However, the temperature fluctuation of the CPH during winter was almost the same with that of EPH at 14.5 to $18.2^{\circ}C$. The NH3 levels in the CPH ranged from 9.31 to 16.9 mg/L during summer and 5.1 to 19.7 mg/L during winter whilst that of the EPH pig house was 7.9 to 16.1 mg/L and 3.7 to 9.6 mg/L during summer and winter, respectively. These values were less than the critical ammonia level for pigs with the EPH maintaining a lower level than the CPH in both winter and summer. The air velocity at pig nose level in the EPH during summer was 0.23 m/s, enough to provide comfort because of the unique design of the inlet feature. However, no air movement was observed in almost all the lower portions of the CPH during winter because of the absence of an inlet feature. There was a significant improvement in weight gain and feed intake of pigs reared in the EPH compared to the CPH (p<0.05). These findings proved that despite the difference in the housing systems, a stable indoor temperature was necessary to minimize the impact of an avoidable and highly fluctuating outdoor temperature. The EPH consistently maintained an effective indoor airspeed irrespective of season; however the CPH had defective and stagnant air at pig nose level during winter. Characteristics of airflow direction and pattern were consistent relative to housing system during both summer and winter but not of airspeed. The ideal air velocity measurement favored the EPH and therefore can be appropriate for the Korean environment. Further emphasis on its cost effectiveness will be the subject of future investigations.

• The Korean Nurse
• /
• v.29 no.3
• /
• pp.25-35
• /
• 1990

It is a fact that there are recent increasing trends or incidence of the colorectal carcinoma among other colorectal diseases. In such trend, the early detection remain to be most important by the air contrast barium enema and total colonofiberscopy. There are several ways to prepare the colon for barium enema and colonofiberscopy which include several agents. The mechanical cleansing have been used most frequently since Brown's method was adapted to be most perfect for colon deansing. The ideal laxatives and enema solutions were limited to adequate dose, it's effectiveness, patient's diet and bowel habit, minimal side effect, low cost and simple to perform. In order to compare the effectiveness of various cleansing solutions, six experimental methods were formed as shown; 1. normal saline enema, 2. castor oil with normal saline enema, 3. castor oil with soap suds enema, 4. magnesium citrate with normal saline, 5. magnesium citrate with soap suds enema and 6. ingestion of Golyetly solution. The authors have compared and determined the degree of cleanness by an experienced endoscopist. The total number of patients was 247, age distribution was $43{\pm}15$ years old, and sex distribution was 133 males and 114 females. The grade I and II represented no difficulties at performing the colonofiberscopy, but grade ill and N had some difficulties, even unable to perform the colonofiberscopy. The effectiveness the cleansing agents, represented with grade I and II was 95.9% (47/49) in method 6, 93.2%(54/58) in method 2, 83.3%(30/33) in method 3, 70.0%(28/10) in method 5, 66.7%(16/24) in method i, and 45.7%(18/40) in method 4. Method 2 and 6 were the most effective in normal bowel habit patients. In constipated patients, method 6 was the most effective and all method except method 11 were effective in diarrhea patients. The degrees of less mucosal irritation by various bowel cleansing method were in the order of method 6(100%), 1(100%), 5(74%), 2(69%). In subjective symptoms and cleansing groups, abdominal distension, pain, nausea and vomiting were complained, and that's subject symptoms were in the order of method 3(88.9%), 6 (79.6%), 1(75%), 5(72.5%), 2(72.4%), 4(67.5%). In conclusion, we believe that the Golytely of the mechanical cleansing solution for colonofiberscopy was the most effective, but others depended on the patient's condition und bowel habit.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.651-659
• /
• 2015

Currently, social demands for long span building structures are increasing due to architectural planning purposes and economic efficiency. As a result, lighter board-type voiding materials were suggested. With the use of board-type voiding materials, a slab is able to become light weight and convenient. This process efficiently eliminates concrete where it is not required; considerably diminishing dead weight while maintaining the flexural strength of the slab. The reduction in concrete also allows for overall cost reductions and design flexibility. Also it can be ease with fixing the voided material that is composed of one body form. Although board-type voiding materials are ideal, the top and bottom concrete plates lack integrity. Because of this, test results show horizontal cracking towards the tops and bottoms of the concrete columns, or webs, connecting the slabs. The key to correcting this problem is to increase the shear strength. In order to increase the shear strength of the structure, horizontal shear area must increase. R70(100)-D-F has the largest horizontal shear area as it also shows stronger strength. As a result, shear strength ($V_{nh}$) is dependent on the horizontal shear area (N). $V_{nh}={\alpha}{\times}0.16{\sqrt{f_{ck}}}{\frac{{\pi}D^2}{4}}{\times}N({\alpha}=1.8125)$. The web columns have a shear span to depth ratio (a/d) that is less than 2; which classifies it as a deep beam. In this case, however, the shear strength of the deep beams may be as much as 2 to 3 times greater than that predicated conventional equations developed for members of normal proportions. As a result, ${\alpha}$ is suggested as an extra coefficient in the equation for shear strength ($V_{nh}$).