• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.51-66
• /
• 2006

The climate of the last glacial maximum (LGM) in northeast Asia is simulated with an atmospheric general circulation model of NCAR CCM3 at spectral truncation of T170, corresponding to a grid cell size of roughly 75 km. Modern climate is simulated by a prescribed sea surface temperature and sea ice provided from NCAR, and contemporary atmospheric CO2, topography, and orbital parameters, while LGM simulation was forced with the reconstructed CLIMAP sea surface temperatures, sea ice distribution, ice sheet topography, reduced $CO_2$, and orbital parameters. Under LGM conditions, surface temperature is markedly reduced in winter by more than $18^{\circ}C$ in the Korean west sea and continental margin of the Korean east sea, where the ocean exposed to land in the LGM, whereas in these areas surface temperature is warmer than present in summer by up to $2^{\circ}C$. This is due to the difference in heat capacity between ocean and land. Overall, in the LGM surface is cooled by $4{\sim}6^{\circ}C$ in northeast Asia land and by $7.1^{\circ}C$ in the entire area. An analysis of surface heat fluxes show that the surface cooling is due to the increase in outgoing longwave radiation associated with the reduced $CO_2$ concentration. The reduction in surface temperature leads to a weakening of the hydrological cycle. In winter, precipitation decreases largely in the southeastern part of Asia by about $1{\sim}4\;mm/day$, while in summer a larger reduction is found over China. Overall, annual-mean precipitation decreases by about 50% in the LGM. In northeast Asia, evaporation is also overall reduced in the LGM, but the reduction of precipitation is larger, eventually leading to a drier climate. The drier LGM climate simulated in this study is consistent with proxy evidence compiled in other areas. Overall, the high-resolution model captures the climate features reasonably well under global domain.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.307-312
• /
• 2013

The interest in reducing the emissions and increasing the fuel economy of ICE vehicles has prompted research on hybrid vehicles, which come in the series, parallel, and power-split types. This study focuses on the series-type hybrid electric vehicle, which has a simple structure. Because each component of a series hybrid vehicle is larger than the corresponding component of the parallel type, the sizing of the vehicle is very important. This is because the performance may be greater or less than what is required. Thus, in this research, the optimal fuel economy was determined and simulated in a real-world system. The optimal sizing was achieved based on the motor, engine/generator, and battery for 13 cycles, where DP was used. The model was developed using ASCET or a Simulink-Amisim Co-simulation platform on the rapid controller prototype, ES-1000.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4849-4854
• /
• 2015

It has been often occurred for the outside components(BU, SVaC, DB) of UM71c AF track circuits to be broken down caused by some pieces of falling ice in the winter time or by infrastructure repairing equipments while facility maintenance works since 2004, opening of Kyeongbu High Speed Rail Express. In this paper, we proposed that we could move the outside components of UM71c track circuit out of wayside from present place. Then we can assure that the life time of those components would be extended. So we simulated the electrical characteristics by changing cable length using MATLAB Simulinks and we designed the compensation capacitor. Also, we obtained the same results as those of simulation by field demonstration test on site. The design specifications obtained from this field verification test could be applied in the absent section of track circuit, if only have a little more intensified research to compensate changed electrical characteristics and to redesign inner impedance of the track circuit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2441-2451
• /
• 2012

This paper presents the design of a control system for improving performance of a washer fluid heating system (WFHS) which is capable of removing frost, ice, snow and/or other debris from windshield. First, for the WFHS, a modeling process is described, and the extraction of characteristic parameters of the model are made by experimental studies. Design variables that affect on performance of the WFHS are also presented. Secondly, a control system is proposed for improving heating performance of the WFHS, and its performance is verified through experiments. The key feature of the proposed control system is to regulate the current of a booster converter input to the WFHS up to the target value that is set to guarantee heating performance. Target current is calculated by using initial temperature value and employing the mathematical model derived in the paper. Computer simulation and experimental results show that the proposed control system can perform heating operations in a way to satisfy per-determined target performance of the WFHS.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.43-48
• /
• 2004

RTP that is proposed supplement of real-time services on internet environment, as Real-time Transport Protocol, is the protocol that for the purpose of sending data of stream type. RTP and RTCP(Real-time Transport Control Protocol) basically work at the same time, RTCP serves with state information of network at present. RTP has important properties of a transport protocol that runs on end-to-end systems and provides demultiplexing. It also offer reliability and protocol-defined flow／congestion control that transport protocol like TCP can not provides. In this paper, we look around concept and construction of Differentiated sen1ice tint run on RTP and by setting parameters of packet transfer method be used CBQ(Class-Based Queuing) for packet transfer on Differentiated service, each service queue controls properly through packet scheduling method, such as WRR(Weighted Round Robin) and PRR(Packet-by-packet Round Robin) all service classes do not experience the starvation and confirm the performance through computer simulation to achieve fairly scheduling.

• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.722-729
• /
• 2010

The aim of this study was to evaluate the physico-chemical, sensory, and microbiological properties of ready-to-eat Korean traditional seasoned beef ribs ("galbi-jjim") prepared by sous-vide/cookchill technology during storage at three different temperatures (4, 10, and $20^{\circ}C$). Beef short ribs marinated in soy sauce for 24 h at $3^{\circ}C$ were packed with vegetables under vacuum. Vacuum-packed beef ribs mixed with vegetables were heated at $90^{\circ}C$ for 90 min in a water bath, and then immediately chilled below $3^{\circ}C$ within 120 min in an ice slurry. Physicochemical (pH, water activity, TBARS, $L^*a^*b^*$ color, and texture profile), sensory (appearance, odor, flavor, texture, and acceptance) and microbiological (Coliform, Escherichia coli, food-borne pathogenic bacteria) properties of the samples were determined during storage at different temperatures. Results showed that pH, $a_w$, and sensory evaluation of products were not affected in any consistent way as a function of either storage duration or temperature. Coliform, E. coli and food-borne pathogens were not detected during storage at any temperature. However, TBARS significantly increased during storage period (p<0.05). Based on TBARS values, SV/CC "galbi-jjim" can be stored for 15 d, 12 d and 1 d at 4, 10 and $20^{\circ}C$, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1002-1010
• /
• 2015

Natural gas hydrates are newly emerging as an environment-friendly source of energy to substitute for fossil fuels in the 21stcentury.NGHs are reported to holds much amounts of natural gas (up to 182 standard volumes of gas per volume of hydrate); they are easy to store and safe to carry at about minus 20 degree Celsius under atmospheric pressure because of the self-preservation phenomenon of gas hydrates. The transporting method by gas-ice-hydrate ship carriers has been introduced and developed by a variety of industry and research institutions. Our team has been conducted to develop NGH total systems, including a breakthrough NGH carrier for sea transportation, since 2011. The NGH pellet carrier does not require a separate cooling system for cargo, and the initial temperature is maintained through insulation of the cargo tanks throughout the transport to the final destination. The heat conducted from the exterior and passing through the insulation material of the hull should be cut off as much as possible, but heat inflow inside the cargo tank from an external source is inevitable during transport. In this study, the heat transfer in a cargo tank of a 115K NGH carrier was analyzed through simulation with a commercial CFD code to estimate the boil-off gas/boil-off rate on the developed carrier and understand major hazards that could significantly impact the safety of the vessel.

• Atmosphere
• /
• v.18 no.4
• /
• pp.387-395
• /
• 2008

The impact of horizontal resolution on a regional climate model was investigated by simulating precipitation over the Korean Peninsula. As a regional climate model, the SNURCM(Seoul National University Regional Climate Model) has 21 sigma layers and includes the NCAR CLM(National Center for Atmospheric Research Community Land Model) for land-surface model, the Grell scheme for cumulus convection, the Simple Ice scheme for explicit moisture, and the MRF(Medium-Range Forecast) scheme for PBL(Planetary Boundary Layer) processing. The SNURCM was performed with 20 km resolution for Korea and 60 km resolution for East Asia during a 20-year period (1980-1999). Although the SNURCM systematically underestimated precipitation over the Korean Peninsula, the increase of model resolution simulated more precipitation in the southern region of the Korean Peninsula, and a more accurate distribution of precipitation by reflecting the effect of topography. The increase of precipitation was produced by more detailed terrain data which has a 10 minute terrain in the 20 km resolution model compared to the 30 minute terrain in the 60 km resolution model. The increase in model resolution and more detailed terrain data played an important role in generating more precipitation over the Korean Peninsula. While the high resolution model with the same terrain data resulted in increasing of precipitation over the Korean Peninsula including the adjoining sea, the difference of the terrain data resolution only influenced the precipitation distribution of the mountainous area by increasing the amount of non-convective rain. In conclusion, the regional climate model (SNURCM) with higher resolution simulated more precipitation over the Korean Peninsula by reducing the systematic underestimation of precipitation over the Korean Peninsula.

• Ocean and Polar Research
• /
• v.28 no.3
• /
• pp.245-258
• /
• 2006

We investigated seasonal variations of the upper ocean temperature and the mixed layer depth (MLD) in an eddy-permitting global ocean general circulation model (OGCM) to assess the OGCM perfermance. The OGCM is based on the GFDL MOM3 which has a horizontal resolution of 0.5 degree and 30 vertical levels. The OGCM was integrated for 68 years using a monthly-mean climatological wind stress forcing. The model sea surface temperature (SST) and sea surface salinity were restored to the Levitus climatology with a time scale of 30 days. Annual-mean model SST shows a cold bias $(<\;-2^{\circ}C)$ in the summer hemisphere and a warm bias $(>\;1^{\circ}C)$ in the winter hemisphere mainly due to the restoring boundary condition of temperature. The model MLD captures well the observed features in most areas, with a slightly deep bias. However, in the Ross Sea and Weddell Sea, the model shows significantly deeper MLD than the climatology-mainly due to weak salinity stratifications in the model. For amplitude of seasonal variation, the model SST is smaller $(1{\sim}3^{\circ}C)$ than the observation largely due to the restoring surface boundary condition while the model MLD has larger seasonal variation $({\sim}50m)$. It is suggested that for more realistic simulation of the upper ocean structure in the present eddy-permitting ocean model, more refinements in the surface boundary condition for the thermohaline forcing and parameterization for vertical mixing are required, together with the incorporation of a sea-ice model.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.63.3-63.3
• /
• 2019

Active asteroids are celestial bodies that distinctively have asteroid-like orbital elements but show comet-like activity. They exhibit the activities due to the sublimation of volatile ices, impacts with small objects or break-up by rapid rotations. As of 2019 February, 30 active asteroids are detected in the outer main belt (i.e., the semimajor axes a>2.5 au) while only 3 of them in the inner main belt (a<2.5 au), suggesting that sublimation of remaining icy volatiles can be one of the most fundamental mechanisms for the activities. A sudden activity of (6478) Gault was reported in early 2019. The asteroid was discovered in 1988 and has exhibited its inactive appearance until the end of last year. Soon after the report, we have conducted imaging observations using the Seoul National University Observatory 1.0-m telescope and the Korea Microlensing Telescope Network (KMTNet) to monitor the activity. The observed images showed a primary dust tail that consists of dust grains ejected early November in 2018. Later, another tail developed, indicating further dust ejection occurred around late December 2018. Our model simulation to reproduce the morphology of the dust cloud suggests that the slightly-curved primary dust tail results from a continuous dust ejection over weeks. The total mass of ejecta was estimated to XX kg (XX% of the asteroid mass). Such continuous dust ejection for the inner active asteroids was unexpected because ice might have already sublimated from subsurfaces of inner main belt. Based on our observational evidence, we will discuss how inner asteroids are activated and eject dust continuously.