• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.474-474
• /
• 2023

최근 기후변화로 강우량이 증가하면서 복잡한 수위, 소류력, 유속이 나타나는 하천의 만곡에서 여유고를 초과하여 호안의 유실 및 제방의 파괴가 발생하고 있다. 이러한 현상을 예방하기 위해 1차원 홍수유출 모형을 이용하여 직선하도의 수위와 유속 등을 계산하고 분석할 수 있으나, 주로 만곡부가 나타나는 사행하도의 편수위와 소류력, 유속을 고려하지 못한다. 따라서 만곡부의 수리 특성을 해석하기 위해서는 2차원의 수위, 유속의 급격한 흐름변화를 효과적으로 계산할 수 있는 홍수유출 모형이 필요한 실정이다. 본 연구에서는 강원도 삼척시에 위치한 오십천을 연구대상 지역으로 하여 2차원의 수리특성 분석이 가능한 Iber 모형을 적용하였다. 연구대상 하천을 5m 간격의 유한요소망으로 구성하고 DEM의 고도 값을 입력 하였으며, 하천정비기본계획에서 제시한 빈도별 홍수량을 적용하여 편수위, 소류력, 유속 등의 수리특성을 분석하였다. 그 결과 만곡부에서 최대 1.7m의 편수위가 발생해 여유고를 초과하는 결과가 나타났다. 유속과 소류력은 비례하는 경향을 나타내면서 만곡의 중앙보다는 외측에 집중되는 특징이 나타났다. 향후 하천의 만곡부에서 범람이 발생하면 하천 인근 지역의 피해를 예방하는 방안으로 2차원 모형이 도입되면 피해를 저감 할 수 있을 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.431-431
• /
• 2011

Rio Narcea 는 스페인 북부에 위치한 Astuias 지역을 흐르는 Nalon River 의 한 지류로서 총연장 102km 유역 면적 1,135 m이며. 사행천으로 홍수 시 범람하기 쉬운 곡류천의 특성상 잦은 홍수피해를 받고 있는 지역이다. 특히 2010년 6월에는 일주일 사이에 홍수 피해가 두 번씩이나 발생함에 따라 수많은 인명피해가 발생하였고 사회 SOC 시설이 큰 타격을 입는 등 상당한 피해를 야기하였다. 이에 1D 및 2D 수리 모델링 프로그램을 이용하여 사행천에 수리특성을 분석하고, 그에 따른 홍수범람도를 작성하여 1D와 2D 모델링을 비교분석하였고 이를 이용하여 홍수 피해 방지 대책을 마련하는데 도움이 되고자 한다. 1D 모델링은 HEC-GeoRAS 및 HEC-RAS를 이용하였으며, 2D 모델링에는 IBER를 이용하였다. Arc-GIS 툴을 이용한 HEC-GeoRAS 기능을 사용하여 강의 단면을 구성하고 HEC-RAS를 이용하여 1차원 모델링을 수행하였으며, 2D 모델링에는 스페인의 CIMNE에서 개발한 2차원 수리해석 프로그램인 IBER를 사용하였는데, 이 프로그램은 부정류 해석과 난류 해석, 유사이동 및 Dam-break 등의 해석이 가능하다. 1D 및 2D 모델링의 결과 값으로 얻어진 수심 및 유속을 토대로 1D는 Arc-GIS를 이용, 2D는 IBER 프로그램 내에 기능을 이용하여 바르셀로나에서 주로 사용되는 Catalan Water Agency 기준에 의한 홍수범람도를 작성하였다. 각각의 1D 와 2D 모델링으로 작성한 홍수범람도를 비교분석해 본 결과 거의 유사하게 표현됨을 알 수 있었으며, 두 모델링 기법 모두 홈수범람도를 표현함에 있어서 유용하게 사용될 수 있을 것이라 생각된다. 대상지역의 관련 자료의 유무에 따라 구분하여 1D 혹은 2D 모델링 기법을 선택 사용할 수 있으며. 유역의 홍수발생시 인명과 재산 피해에 대비한 홍수범람 지도 및 홍수재해지도 제작에 도움이 될 것으로 판단된다.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.61-66
• /
• 2023

In this study, we analyzed the flooded area around Samcheok Middle School caused by typhoons MAYSAK·HAISHEN in September 2020. To analyze the confluence of Samcheok Osipcheon, local stream Deungbongcheon, we utilized Iber, a two-dimensional hydraulic model. We simulated the water depth and flood extent based on the peak flows on September 3 and September 7, 2020, and the 80 year and 100 year frequency floods. The simulation results showed that the 80-year frequency flood and the 100-year frequency flood on September 7 were insignificantly different, but the maximum flow rate from September 3 to September 7 was significantly different at 401 m³/s, resulting in a difference of 0.8 m in water depth and 7.1 m² in flood area. In addition, the analysis that considered only the contour lines using contour lines predicted inundation of not only the Samcheok Middle School playground but also the building, confirming the need to apply DSM.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.82-85
• /
• 1987

This paper describes the technology for the improvement of subxdriber loop utilization. Nearly all customer loops are now carried at voice frequency on individual wire pairs. Reenct digital technology improvements together with the increasing cost of wire, have resulted in some penetration of carrier systems into the loop plant. Moreover the increasing use of local digital switching systems should permit digital carrier systems to become an important factor in the loop plant in the future.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.286-291
• /
• 1998

The aim of this paper is to measure the tappet rotation in OHC valve train system. Tappet is eccentric from the cam center to rotate for preventing the partial wear. The experimental system is developed to measure the tappet rotation by using the laser beam and optical fiber. The characteristics of tappet rotation is presented for various operating conctitions. Specially, it is observed that tappet is rotated at the base circle.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.99-104
• /
• 2000

In this paper, the crack properties fiber reinforced concrete(SFRC) beams by experimental method is discussed. The major role played by the steel fiber occurs in the post-cracking zone, in which the fibers bridge across the cracked matrix. Because of its improved ability to bridging cracks, SFRC has better crack properties than that of reinforced concrete(RC). Crack properties are influenced by longitudinal reinforcement ratio, volume and type of steel fibers, strength of concrete and the stress level. Crack width and number of cracks in SFRC beams have been evaluated from experimental test data at various levels of stress for the tested beams.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.107-116
• /
• 1997

Karyotype of apterous green peach aphid (Myzus persicae SuIBer) populations occurring in tobacco fields and their resistance to insecticides were investigated. All of the 16 clones collected from tobacco fields had same chromosome number of 2n=12. Among them, 5 clones had the normal karyotype, regardless of color morph, but chromosomal translnations between #1 and #3 autosomal chromosomes were noted in the other 11 clones. All of the aphid clones were highly resistant tolambda cyhalothrin, a pyrethroid pesticide, having over 20 times higher concentrations of LD90 than recommended concentration (10ppm) for the aphid. However, their resistance to acephate, demeton 5-methyl and pirimicarh varied depending on the clones, among which green-colored clones were generally more resistant to the pesticides than red-colored ones. No association was found between the insecticide resistance and the karyotype of the aphid in this experiment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.165-169
• /
• 2005

The fire damage of building wouid effect on the safety of structure. When the reinforced concrete structure is heated by high temperature due to the fire, the structural resisting-force will be decreased. In a way, it is a requirement to use high strength concrete for high rise building. Particularly, fire resistance properties of high-strength concrete is more important than normal strength concretes. The fire outbreak of a high strength concrete by sudden temperature rise is a main problem, and causes crack by thermal stress, loading to the deterioration of the durability. In this study, normal and high strength mortar were exposed to a high temperature environment. And than fundamental data for the character change of concrete heated highly were presented by measuring compressive strength of concrete with polypropylene and vinylon fiber, before and after heating. As the results, it is proven that high strength mortar with polypropylene and vinylon fiber for prevents deterioration of durability by fiber.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.3
• /
• pp.81-91
• /
• 1989

The aims of this study were to determine mechanical properties of steel-fiber reinforced concrete under splitting tensile, flexural and compressive loading, and thus to improve the possible applications of concrete. The major factors experimentally investigated in this study were the fiber content and the length and the diameter of fibers. The major results obtained are summarized as follows : 1.The strength, strain, elastic modulus and energy obsorption capability of steel-fiber reinforced concrete under splitting tensile loading were significantly improved by increasing the fiber content or the aspect ratio. 2.The flexural strength, central deflection, and flexural toughness of steel4iber reinforced beams were significantly improved by increasing the fiber content or the aspect ratio. And flexural behavior characteristic was good at the aspect ratio of about 60 to 75. 3.The strength, strain, and energy absorption capability in compression were increased with the increase of the fiber content. These effects were not so sensitive to the aspect ratio. The energy absorption capability was improved only slightly with the increase of the fiber length. 4.The elastic modulus, transverse strains, and poisson's ratios in compression were not influenced by the fiber content. 5.The steel-fibers were considered to be appropriated as the materials covering the weakness of concrete because the mechanical properties of concrete in tension and flexure were significantly improved by steel-fiber reinforcement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.236-239
• /
• 2001

This paper provides a comprehensive study of the effect of time delay on adaptive transmission methods. By adaptive we mean that the transmission of data is made adaptive according to channel conditions. That is, the modulation level at the transmitter is carefully controlled for maximizing bandwidth efficiency, on the basis of the observation of instantaneous channel characteristics. By making use of the simulator developed for the present work, a large number of channel propagation environments including the models proposed in 3GPP were submitted to the simulator and the performance with respect to both time delay and SNR is observed. The results show that the performance is very sensitive to channel delay and in some cases the performance shows irreducible BER (IBER). A large amount of delay together with a high fading rate greatly affects the performance of adaptive transmission systems.