• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.597-600
• /
• 2003

The development and maintenance of a sound bond are an essential requirements of concrete repair and replacement. The bond property of a bonded overlay to its substrate concrete during the lifetime is one of the most important performance requirements which should be quantified. A standard or a verified bond strength measurement method is required at field for screening, selecting materials and quality control for overlay or repair materials. This study compares the nipple pipe direct tensile test, flexural adhesion test, and core pull-off test with their test results. Substantial differences in the failure stresses of three test methods were attributed to their different geometries and loading conditions. From these comparison and investigation, core pull-off test was relatively good because the coefficient of variation values were about 2%. It would be suitable for use in-situ because of its simplicity and accuracy.

• Steel and Composite Structures
• /
• v.33 no.2
• /
• pp.299-306
• /
• 2019

The natural fibre composites are termed as bio-composites. They have shown a promising replacement to the current carbon/glass fibre reinforced composites as environmental friendly materials in specific applications. Natural fibre reinforced composites are potential materials for various engineering applications in automobile, railways, building and Aerospace industry. The natural fibre selected to fabricate the composite material is plant-based fibre e.g., sisal fibre. Sisal fibre is a suitable reinforcement for use in composites on account of its low density, high specific strength, and high hardness. Epoxy is a thermosetting polymer which is used as a resin in natural fibre reinforced composites. Hand lay-up technique was used to fabricate the composites by reinforcing sisal fibres into the epoxy matrix. Composites were prepared with the unidirectional alignment of sisal fibres. Test specimens with different fibre orientations were prepared. The fabricated composites were tested for mechanical properties. Impact test, tensile test, flexural test, hardness test, compression test, and thermal test of composites had been conducted to assess its suitability in industrial applications. Scanning electron microscopy (SEM) test revealed the microstructural information of the fractured surface of composites.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.389-395
• /
• 2010

This paper is about the copper slider with high electric conductivity and resistance arc. A new copper slider which has enhanced resistance against frictional wear was developed. By alteration of its material components and manufacturing process, its material property has been enhanced. To verify its enhanced wear-resisting capacity, a laboratory test and a field test were carried out. As the laboratory test, a dynamo test was performed and its test result showed that the developed new copper slider had superior wear-resisting capacity to the currently used copper slider. The new one showed double durability of the current one and normal wearing characteristics. A filed test was performed on the Metro subway lines at service by Seoul Metro. The field test showed similar results to those from the laboratory test, which the d eveloped new copper slider has double superior durability and sound wearing patterns. Authors strongly believe that the replacement of the copper slider currently in use by the developed new one will contribute to the economic and efficient operation of the subway line system

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.155-161
• /
• 2001

Federated process framework is introduced responding to market\\`s needs to gain benefits of process information sharing in a virtual enterprise. The framework is verified by implementing its prototype system. However, it is very difficult to integrate developed prototype system with operating legacy systems to show its applicability. Thus, a test bed approach is widely adopted to provide a system environment that imitates the operations of real legacy systems and their interactions. In this paper, we described implementation detail of test bed imitating the real-world workflow systems. We also show its contribution and results of the prototype system that was implemented on the test bed.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2301-2303
• /
• 2003

A steam turnine in thermal/nuclear power plant drives generator and maintains it at rated speed using high temperature and high pressure steam energy. After synchronization in parallel with the power system, generator output increases according as the governor, that is the controller, increases steam flow into turbine. By the way, as the steam flow into turbine can not be reduced fast even though the electrical load is lost, the turbine gets into dangerous situation due to the increase of its speed. At this time, the duty of the turbine governor is to limit the speed to its overspeed trip setpoint by stopping the steam flow as soon as possible, the test of which is called load rejection test. It is introduced in this paper for a simulation test of generator load rejection to be implemented on the turbine governor in a 600MW nuclear power plant before its startup.

• Journal of Ginseng Research
• /
• v.27 no.3
• /
• pp.115-119
• /
• 2003

There has been continuing interest in the development of synthetic and natural compounds that modify the immune response particularly for the treatment of AIDS and cancer. During the past fifty years, numerous scientific studies have been published on ginseng. Modem human studies have investigated preventive effect of ginseng on several kinds of cancer, its long term immunological effect on HIV patients, its effect on cell mediated immune functions in healthy volunteers. Similarly non clinical studies on animal model system have studied the chemopreventive action of ginseng on cancer and immunological properties of ginseng. The precise mechanism of action of ginseng, however, not clearly understood. Considering its wide-ranging therapeutic effects, this study is being undertaken to elucidate the general mode of action of ginseng, especially to test our hypothesis that its biological action may be mediated by the immune system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1234-1239
• /
• 2000

KOMPSAT-1(Korea Multi-Purpose Satellite), which opened the space era in Korean peninsula, was developed from 1994 and launched successfully in December of 1999 at VAFB, USA. This paper presents a launch environment test of KOMPSAT and a short description of environment test facilities at Korea Aerospace Research Institute as well. The launch environment tests of KOMPSAT-1 satellite, such as vibration, acoustic, pyro-shock and mass properties measurement test, were performed during its system integration and test period. The participating engineers concluded that KOMPSAT-1 satellite would withstand environment during its launch period.

• The Korean Journal of Applied Statistics
• /
• v.18 no.1
• /
• pp.99-113
• /
• 2005

In this article, we propose a chi-squared test of spherical symmetry. The advantage of this test is that the test statistic and its asymptotic p-value are easy to compute. The limiting distribution of the test statistic is derived under spherical symmetry and its accuracy, in finite samples, is studied via simulation. Also, a simulation study is conducted in which the power of our test is compared with those of other tests for spherical symmetry in various alternative distributions. Finally, an illustrative example of application to a real data is provided.

• Journal of the Korean Home Economics Association
• /
• v.20 no.2
• /
• pp.135-140
• /
• 1982

As a step preliminary to the factor-analysis of a child-rearing attitude scale under construction, its preliminary form containing a total of 368 self-answered questions was administerd to 88 married women with one or more children in the grade school age. all graduates of colleges and in possession of a home telephone and a house, twice from one week apart. The test-retest correlation coefficients, calculated for each test item based on the subject's choice among the three response alternatives on two test ocasions, ranged from .80 to .10. The cut-off point of r=.41 or lower led to the elimination of 48 items. As a point of incidental interest, the rate of response concordance. The namber of subjects giving the same categroy response on two occasions was calculated for each item and it was correlated with its test. retest correlation coefficient. The two different indices of item test-retest reliability were found not related to each other. Empirical evidence, as well as rational justifications, was presented to show that the correlation coefficient is the better of the tow indices of item test-retest reliability.

• Journal of The Korean Association For Science Education
• /
• v.29 no.3
• /
• pp.277-290
• /
• 2009

In the era of the outcome-based education, multiple-choice test has been widely employed owing to its efficiency that enables educators to evaluate a quantity of students with much objectiveness. However, the prevalent test has not been reconsidered enough to overcome its apparent shortcomings: examiners' effort for developing plausible and faultless distracters defending from every falsification, and students' random guessing on key choices. For alleviating such defects, tiered test as an experimental format of multiple-choice tests has been suggested in science education. Since there has not accumulated much study on the implementation of tiered tests, our research aim is set to construct a framework suggesting statistical indexes for rationally discerning tiered units that develop an effective tiered test. Graded both by our tiered-scoring and by the conventional partial-scoring, the preliminary tiered test in secondary physics attests the improvement in its discrimination and difficulty distribution. The findings reveal that the two indexes discern effective tiered items: discrimination increase (Ct-p) and difficulty decrease (Dp-t). Based on the index information, 4 heterogeneous tier types are recommended in the content of secondary physics: directional manipulation, repeated calculation, diverse explanation, and plural variables.