• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.19-26
• /
• 2009

The Ministry of Land, Transport and Maritime Affairs(MLTM) project for the DB construction of national geotechnical information was automatically computerized the geotechnical investigation results on the construction site in 2007. So 'the rule for computerizing of geotechnical investigation results and its application' were promoted the establishment and applicable project. It was promoted in earnest that all organization and affiliation of MLTM, local governments included the project because of stabilization of the law from 2008. We have analyzed a application-ratio of geotechnical information about users of geotechnical information system and distribution data and established a plan of applying enhancement for the DB construction and DB utilization in 2008. In this paper, we propose the result for application-ratio analysis and application plan through the application-case study of national geotechnical information DB. In the application-ratio analysis, the analysis in the field shows the most high as 39% in construction planning and preliminary investigation, the analysis in the effect of capabilities shows the most high as 25% in the increased efficiency of business. Also the analysis in the field of application shows the most high as 95% a application-ratio of geotechnical information in architecture and civil.

• Analytical Science and Technology
• /
• v.30 no.6
• /
• pp.405-410
• /
• 2017

High energetic materials (HEMs) have been used in fuels, civil engineering and architecture as well as military purposes such as explosives and propellants. The essential process for the development of new energetic compounds is to accurately calculate its detonation performances. The most typical equation for calculating the explosive performance is the Kamlet-Jacobs (K-J) equation. In the K-J equation, the parameter such as the number of moles of gaseous products at the explosion, the average molar mass of gas products, and the explosion heat greatly affect the explosion performance. These depend on the product composition for the detonation reaction. In this study, detonation products of 65 high energetic molecules (HEMs) were calculated from the various rules such as Kamlet-Jacobs, Kistiakowsky-Wilson, modified Kistiakowsky-Wilson, Springall-Roberts rules to calculate more accurate detonation velocity (Dv). In addition, they were applied to five kinds of detonation velocity equations proposed by K-J, Rothstein, Xiong, Stine and Keshavarz. The mean absolute error and root mean square error of HEMs were obtained from experimental and calculated velocity value for each method. The K-J and Xiong equation that is slightly complex showed a lower mean absolute error than the simple Rothstein and Keshavarz equation. When the mod-KW rule was applied to the Xiong equation, the detonation velocities were the most accurate. This study compared the various method of calculating the detonation velocity of HEMs to obtain accurate HEMs performance.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.2
• /
• pp.109-120
• /
• 2016

Flexural tests of full-scale concrete-filled U-shape hybrid composite beams were conducted. Ordinary (SS400) and high-strength (SM570) steel plates were used in the web and in the bottom flange of U-shape steel section respectively. The primary objectives were to develop the hybrid section configuration with maximized flexural capacity and to investigate its flexural strength and deformation capacity. All the hybrid test specimens in this study exhibited the plastic moment capacity and resonable deformability. It is shown that the plastic stress distribution can be assumed in calculating the flexural strength of the proposed hybrid composite beams if the plastic neural axis is located within 15% of the total beam depth from the top of the composite slab. The procedure for computing the effective flexural stiffness of hybrid composite beams is also recommended based on test results.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.473-486
• /
• 2014

This study aims to review whether climbing lane installment is needed by analyzing the impact that standard trucks have on traffic according to vertical alignment at SMART highway, and if climbing lanes are required to propose truck speed change curves based on slope length. We used VISSIM simulation model to obtain the speed change of the standard truck on uphill roads. The standard truck on climbing lanes was set for 100kg/kW (170lb/hp) with the entry speeds set and analyzed by 90, 100, and 110 km/h considering the future speed limit of trucks. The results of the research show that under SMART highway circumstance, the 1 and 2% vertical alignment is not needed at the climbing lane but 3% vertical alignment is necessary. In order to install the climbing lane at 3% vertical alignment, the speed change curve of truck depending on slope length of 90, 100, and 110km/h of entry speed is proposed.

• Journal of the Korean association of regional geographers
• /
• v.23 no.1
• /
• pp.118-135
• /
• 2017

The decline in urban center, changes in the population structure, economic slump and etc. have caused empty or deserted houses in the city. The government recognizes the houses as the reason for the accelerated formation of local slum, and as the negative element threatening the residential environment, urban landscape, social stability and others. This research aims at investigating the spatial distribution of empty or deserted houses in Gwangju metro city, identifying hotspots and classifying those hotspot according to the socioeconomic indicators as well as physical ones, and examining their characteristics and problems in the urban space. The results of this study are as follows. First of all, there is a positive spatial autocorrelation in the spatial distribution of empty and deserted houses in Gwangju metro city. Second, several hotspots are identified mainly around the old CBD area showing a sign of urban decline. Third, the indicators of urban decline were visualized using triangulation charts, and hotspots of empty(deserted) houses are classified so that the classification could serve for effective urban regeneration policy making tailored for each region.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.4
• /
• pp.119-132
• /
• 2012

The unmanaged abandoned concrete roads are vulnerable toward the issues on soil and water pollution, which requires flexible managing method such as eco-corridor after the process of ecological restoration. Among various alternations of abandoned concrete-paved roads, ecological restoration technique may be the most suitable method in sites including high quality of natural environment. Therefore, as in Young dong province, GyungBu express highway (227.24~229.04km), which is near to Hwang-gan IC, the survey to measure its effect of soil under the paving and water pollution by abandoned concrete roads was discussed. Then, the restoration method of plantings of landscape trees and hydro-seeding methods of artificial soil media was appraised through consecutive monitoring. The soil adequacy analysis shows lower percentage of heavy metal substance in each depth level compared to standard limit stated by the Ministry of Environment, along with low concerns raised after the analysis on heavy metal content of the spilled water on the concrete roads. Meanwhile, Korean Weigela (Weigela subsessilis L.H. Baily) was found to be withered in small-scale landscape trees planting sites. Among the seeding plants. the family of leguminosae, Silene armeria, Dendranthema boreale, Caryopteris incana and Aster yomena show good establishment results. Overall studies on planting of small and large landscape trees, planting method of container plants, planting method of ground cover plants, and germination and development trend of seeding plants of the experimental restoration site on abandoned concrete roads are revealing specific trends in the way landscape woody plants establishment and growth. Finally, this study suggests further studies and survey on varied plant restoration methods on abandoned concrete-roads for developed design guidelines of their methods.

• Journal of Environmental Impact Assessment
• /
• v.24 no.2
• /
• pp.175-189
• /
• 2015

The objective of this study was to analyze characteristics of distribution of amphibian species and the affecting ecological factors. For the study, habitat environment factors were determined and applied to a habitat suitability model for the data collected from the Seom River in Hoengseong County and Wonju City, Gangwon Province, Korea between March 2013 to October 2013. The analyzed amphibian species were Rana nigromaculata, Hyla japonica, Rana dybowski, and Rana rugosa Temminck and Schlegel, and a logistic regression model was used with the pseudo-absence data. The result of the model analysis suggests that the major factors for Rana nigromaculata are distance to vegetation and rock and that for Hyla japonica is waterway. Rana dybowski and Rana rugosa Temminck and Schlegel have similar habitat characteristics, but the latter is shown to be dominant due to its wider habitat preference. According to the species richness model, the analyzed amphibian species are shown to have tendency to move between valleys or streams. This study quantitatively analyzed habitat environment characteristics using species distribution model, however, there is a limitation in terms of analysis on food factor and connectivity with other species. Combined with additional density or habitat analysis on birds or fish, this study can lead to more comprehensive analysis on biological environment factors.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.115-128
• /
• 2018

Understanding the process of spatial perception plays a significant role in the design process as well as in the use of actual spaces. The perception of spatial depth can vary according to the space composition and design even there is no change in the actual size of the space. The properties of 3-dimensional space are its width, height, and depth; however, compared to the perception of spatial width and height, little research and theories exist on spatial depth perception. The reasons may be there less interest lies in the effect of spatial depth perception than that of spaciousness or height of space. This study is an investigation of the process of spatial depth perception using an eye-tracking device with stimuli developed through Computer Graphics. A total of 44 interior design major students participated in the eye tracking experiment; and they looked at three images comprised of an identical room with only changes in the rear wall condition. The results show that a significant difference in the fixation duration per stimulus exists. In addition, a significant difference exists on the fixation duration per stimulus according to the participants' answer of the deepest space. The result of this study can help identify factors for spatial depth perception, validate the assumption on it, and provide knowledge on how to acquire desirable spatial depth by utilizing the research result.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.237-243
• /
• 2007

In this paper, we propose the Real-time Dead-Pixel Detection and Compensation System for mobile camera and its hardware architecture. The CMOS image sensors as image input devices are becoming popular due to the demand for miniaturized, low-power and cost-effective imaging systems. However a conventional Dead-Pixel Detection Algorithm is disable to detect neighboring dead pixels and it degrades image quality by wrong detection and compensation. To detect dead pixels the proposed system is classifying dead pixels into Hot pixel and Cold pixel. Also, the proposed algorithm is processing line-detector and $5{\times}5$ window-detector consecutively. The line-detector and window-detector can search dead pixels by using one-dimensional(only horizontal) method in low frequency area and two-dimensional(vertical and diagonal) method in high frequency area, respectively. The experimental result shows that it can detect 99% of dead pixels. It was designed in Verilog hardware description language and total gate count is 23K using TSMC 0.25um ASIC library.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.9-22
• /
• 2007

While standardization and its applications for registering and sharing information resources about B2B transactions such as business documents are relatively well developed, it is not easy to register and share business process resources because there are many ways to define complex business processes using different specification(definition) languages. In practice, there are several competing business process specification languages applicable under service-oriented architecture (SOA) such as ebXML BPSS, WS-BPEL, BPMN and so on. A systematic way has to be prepared to register/share diverse and heterogeneous specifications represented using those languages. This paper demonstrates the usefulness of sharing B2B business processes by prototyping a business process registry called ebRR4BP. First of all, we designed a metadata ontology to support the registration of diverse B2B business processes. To implement the proposed metadata ontology using ebXML registries, a mapping scheme to ebXML Registry Information Model is also suggested. The ontology and mapping scheme will be a foundation for supporting common interchange of business process metadata among B2B resistries.