• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.767-776
• /
• 2016

The aim of this study was to evaluate key properties of the prickly pear cactus (Opuntia ficus-indica var. saboten (OFI) ie, levels of key chemicals (carotenoids, flavonoids and polyphenolic compounds as well as phenolic acid) and its antioxidative potential, depending on where the plant had been cultivated in Korea. The levels of flavonoids and polyphenolic compounds in OFI were 55.45~65.32 mg (+)-catechin/g and 149.00~181.15 mg gallic acid/g, respectively. Protocatechuic acid was the most abundant phenolic acid in the ON1 and ON2 (161.90 and $196.25{\mu}g/g$ DW (dry weight)). Nineteen flavonoids were identified and analyzed by LC-ESI-MS in cladodes from OFI. Narcissin was the most abundant flavonoid in all of the samples ($1,241.89{\sim}1,775.10{\mu}g/g$ DW). Capxanthin and zeaxanthin were the most abundant carotenoids in OFI (64.88~128.08 and $48.10{\sim}93.82{\mu}g/g$ DW). The level of DPPH radical and ABTS radical scavenging activities in OFI were 10.78~25.35 and 16.85~34.16 mg AA eq/100 g, respectively. OFI by cultivar has different kind of phenolic acid, flavonoids, and carotenoids. Therefore, dietary intake of cladodes from OFI may be helpful for improving human health.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.87-94
• /
• 2007

This study was carried out to know the effect of the oriental medicinal plants byproduct containing vitamin E and 0.1% antibiotics (T1) and the oriental medicinal plants byproduct containing vitamin E and the replacing antibiotics by 0.03% herb extracts (T2) and 0.1% aminolevulinic acid (T3) on production performance of finishing hog and its meat qualities. There were no significant differences in the daily weight gain, feed intake, and feed conversion rate values between all treatment groups. However, the T2 group tends to have a higher daily weight gain (g/day) than the other groups (p>0.05). The T2 group showed lower total-cholesterol and LDL-cholesterol contents (114.71 and 68.09 mg/dl, respectively) than the control in the blood serum (p<0.001), and all the treated groups of oriental medicinal plants byproduct and vitamin E increased HDL-cholesterol and decreased LDL-cholesterol contents in the blood serum. Content of vitamin E in muscles from the group T1, T2 and T3 (2.11, 2.21 and 2.18 mg $kg^{-1}$, respectively) showed higher levels than those of control. The presence of antibiotics (chlortetracycline) in hog loin meat were detected (0.08 ppm) in control sample. However, there was no antibiotic in other treated hog loin meats (T1, T2 and T3, respectively). The thiobarbituric acid reactive substances and volatile basic nitrogen values of the groups T2 (0.06 mg MA $kg^{-1}$ and 11.21 mg%, respectively) and T3 (0.05 mg MA $kg^{-1}$ and 8.23 mg%, respectively) were significantly (p<0.05) lower than that of control in loin meat. However, there was no significant difference between treated samples (T1, T2 and T3, respectively) and control in cooking loss and drip loss.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.194-202
• /
• 2009

This study was conducted to determine the effects of gamma and e-beam irradiation on the quality of minced pork and pork patties. Each sample was irradiated at 5 to 20kGy, and its quality characteristics were then evaluated during storage at 30. The results of the total bacterial populations in the minced-pork and pork patty samples showed that the antimicrobial effect of gamma irradiation was superior to that of e-beam irradiation. The 2-thiobarbituric acid reactive substances (TBARS) value of all the samples significantly increased (p<0.05) as the irradiation dose and storage period increased. In addition, the gamma-irradiated (GI) samples had higher (p<0.05) TBARS values than the e-beam-irradiated (EI) samples. The volatile basic nitrogen contents of the GI samples were lower (p<0.05) than those of the EI samples. The color values, such as the $L^*$(brightness), $a^*$(redness), and $b^*$(yellowness) of the minced pork and pork patties, were increased (p<0.05) by irradiation. The hardness and sensory properties, such as the color, chewiness, taste, and overall acceptability of the pork patties, were decreased when the irradiation dose increased, and the hardness and sensory scores of the GI samples were lower than those of the EI samples.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1097-1106
• /
• 1998

Biodegradable edible films were prepared from rice protein concentrates (RPC) made from rice wine meal by alkaline extraction and isoelectric precipitation. The effect of film forming solution pH and plasticizers were studied, and cross-linkers were added to improve mechanical properties and water vapor permeabilities (WVP) of films. Films could be formed within pH $8{\sim}11$ with tensile strength (TS) of 4.3{\sim}5.7\;MPa$. Films produced under pH 11 had the highest TS (5.7 MPa) and the lowest WVP $(0.44\;ng{\cdot}m/m^2{\cdot}s{\cdot}Pa)$. Added glycerol, polyethylene glycol 200 (PEG) and its mixture (GLY:PEG=50:50) as plasticizers also affected the mechanical properties and WVP of films. TS and elongation at break (E) of films at various plasticizer levels were $5.5{\sim}1.0\;MPa$ and $3.6{\sim}24.3%$, respectively. At the same plasticizer concentration, the highest TS was observed when glycerol was used whereas the highest E was measured when mixture was used as plasticizer. WVPs of films with thickness of $60\;{\mu}m$ were $0.39{\sim}0.54\;ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$. WVP of films decreased as the ratio of glycerol/PEG 200 was decreased, and WVP increased as the total amount of plasticizer added to the films increased. Film strength was improved by the addition of small amount of sodium hydrogen sulfate, succinic anhydride, ascorbic acid and citric acid, whereas TS of films containing $0.5{\sim}2.0%$ of NaCl and $CaCl_2$ were lower than those without the salts. The highest TS (6.3 MPa) was achieved with films containing 0.1% of succinic anhydride.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.11-23
• /
• 2003

A study on the electrolytic dissolution of SUS-304 and Inconel-600 specimen was carried out in neutral salt electrolyte to evaluate the applicability of electrochemical decontamination process for recycle or self disposal with authorization of large amount of metallic wastes contaminated with uranium compounds generated by dismantling a retired uranium conversion plant in Korea. Although the best electrolytic dissolution performance for the specimens was observed in a Na2s04 electrolyte, a NaNO$_3$ neutral salt electrolyte, in which about 30% for SUS-304 and the same for Inconel-600 in the weight loss was shown in comparison with that in a Na$_2$SO$_4$ solution, was selected as an electrolyte for the electrochemical decontamination of metallic wastes with the consideration on the surface of system components contacted with nitric acid and the compatibility with lagoon wastes generated during the facility operation. The effects of current density, electrolytic dissolution time, and concentration of NaNO$_3$ on the electrolytic dissolution of the specimens were investigated. On the basis of the results obtained through the basic inactive experiments, electrochemical decontamination tests using the specimens contaminated with uranium compounds such as UO$_2$, AUC (ammonium uranyl carbonate) and ADU (ammonium diuranate) taken from an uranium conversion facility were performed in 1M NaNO$_3$ solution with the current density or In mA/$\textrm{cm}^2$. it was verified that the electrochemical decontamination of the metallic wastes contaminated uranium compounds was quite successful in a NaNO$_3$ neutral salt electrolyte by reducing $\alpha$ and $\beta$ radioactivities below the level of self disposal within 10 minutes regardless of the type of contaminants and the degree of contamination.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.343-356
• /
• 2016

The Korea Radioactive Waste Agency (KORAD) has developed a dual-purpose metal cask for the dry storage of spent nuclear fuel that has been generated by domestic light-water reactors. The metal cask was designed in compliance with international and domestic technology standards, and safety was the most important consideration in developing the design. It was designed to maintain its integrity for 50 years in terms of major safety factors. The metal cask ensures the minimization of waste generated by maintenance activities during the storage period as well as the safe management of the waste. An activation evaluation of the main body, which includes internal and external components of metal casks whose design lifetime has expired, provides quantitative data on their radioactive inventory. The radioactive inventory of the main body and the components of the metal cask were calculated by applying the MCNP5 ORIGEN-2 evaluation system and by considering each component's chemical composition, neutron flux distribution, and reaction rate, as well as the duration of neutron irradiation during the storage period. The evaluation results revealed that 10 years after the end of the cask's design life, $^{60}Co$ had greater radioactivity than other nuclides among the metal materials. In the case of the neutron shield, nuclides that emit high-energy gamma rays such as $^{28}Al$ and $^{24}Na$ had greater radioactivity immediately after the design lifetime. However, their radioactivity level became negligible after six months due to their short half-life. The surface exposure dose rates of the canister and the main body of the metal cask from which the spent nuclear fuel had been removed with expiration of the design lifetime were determined to be at very low levels, and the radiation exposure doses to which radiation workers were subjected during the decommissioning process appeared to be at insignificant levels. The evaluations of this study strongly suggest that the nuclide inventory of a spent nuclear fuel metal cask can be utilized as basic data when decommissioning of a metal cask is planned, for example, for the development of a decommissioning plan, the determination of a decommissioning method, the estimation of radiation exposure to workers engaged in decommissioning operations, the management/reuse of radioactive wastes, etc.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.357-365
• /
• 2016

We observed the ${\gamma}-ray$ shielding characteristics and compressive strength of five types of concrete using general aggregates and high-weight aggregates. The aggregates were classified into fine aggregate and coarse aggregate according to the average size. The experimental results obtained an attenuation coefficient of $0.371cm^{-1}$ from a concrete with the oxidizing slag sand (OSS) and oxidizing slag gravel (OSG) for a ${\gamma}-ray$ of $^{137}Cs$, which is improved by 2% compared with a concrete with typical aggregates of sand and gravel. In the unit weight measurement, a concrete prepared by iron ore sand (IOS) and OSG had the highest value of $3,175kg{\cdot}m^{-3}$. Although the unit weight of the concrete with OSS and OSG was $3,052kg{\cdot}m^{-3}$, which was lower than the maximum unit weight condition by $123kg{\cdot}m^{-3}$, its attenuation coefficient was improved by $0.012cm^{-1}$. The results of chemical analysis of aggregates revealed that the magnesium content in oxidizing slag was lower than that in iron ore, while the calcium content was higher. The concrete with oxidizing slag aggregates demonstrated enhanced ${\gamma}-ray$ shielding performance due to a relatively high calcium content compared with the concrete with OSS and OSG in spite of a low unit weight. All sample concretes mixed with high-weight aggregates had higher compressive strength than the concrete with typical sand and gravel. When OSS and IOS were used, the highest compressive strength was 50.2 MPa, which was an improvement by 45% over general concrete, which was achieved after four weeks of curing.

• Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.86-94
• /
• 2000

In order to develop the enzymatic hydrolysis system concerned with taste and flavor, strains having the high hydrolyzing activity on the soy protein were selected from some traditional Mejus. Two molds and one bacterium producing enzymes which were different in character of hydrolysis were isolated and identified. Leucine and azodye enzyme activities of both M4 and M5 were relatively high among in the isolated molds. And, leucine enzyme activity of B16 was the lowest in the isolated bacteria. These strains were isolated as microorganisms having a dissimilar hydrolysis pattern on the soy protein by enzymatic reactions. Mold M4 on the culture solid media was mycelium colors of white and its sclerotia colors were changed from white to black. According to the result of slide culture, radial conidial head, subclavate vesicle, conidia of subglobose, stipes of uncolored with smooth walls and metula and phialides were existed. Because M4 was taxonomically similar to the characteristics of Aspergillus oryzae (ahlburg) species, M4 was identified and named as Aspergillus oryzae M4.Mold M5 showed white and black mycelium on the MEA medium. Mold M5 colony exhibited grayish-green color and have long(7 mm) sporangiophores at slide culture. Sporangia became brownish-gray and the wall of larger sporangia was broken to form small collars, and smaller sporangia were fomed continually from large basal membrane. Columella is globose and hyaline, and sporangiospores are ellipsoidal of small diameter$(80\;{\mu}m)$. Because M5 was taxonomically similar to the Mucor circinelloides of zygomycetes, M5 was was identified and named as Mucor circinelloides M5. Bacteria B16 colony was opaque white, circular and lobate, and had rod shaped endospore. B16 was found positive in stain, catalase, ${\beta}-glucosidse$ and V-P tests. B16 was found to utilize D-fructose, ${\alpha}-D-glucose$, maltose, D-mannose, D-raffinose, stachyose and sucrose. By the morphological and physiological results, the characteristics of B16 was thought to correspond to that of Bacillus megaterium. However, fatty acid composition was similar to Paenibacillus marcerans, requiring further study for the definite identification. Accordingly, Bacteria B16 was provisionally classified and named as Bacillus megaterium B16.

• Applied Biological Chemistry
• /
• v.46 no.3
• /
• pp.201-206
• /
• 2003

An apple wine was prepared by fermentation at $25^{\circ}C$ for 2 weeks using Saccha개myces cerevisiae KCCM 12224, followed by aging at $15^{\circ}C$ for 14 weeks, and its physicochemical and microbiological changes were investigated. The viable bacterial cell numbers, increased from $1.4{\times}10^3\;CFU/ml$ at the beginning of fermentation, to $2.8{\times}10^6\;CFU/ml$ after 2 weeks, but decreased to $1.0{\times}10^5\;CFU/ml$ after aging. The viable yeast cell numbers changed from $4.3{\times}10^4\;CFU/ml$ to $1.2{\times}10^7\;CFU/ml$ during the fermentation, and decreased to $1.2{\times}10^4\;CFU/ml$ after aging. Sugar content changed from $20.0^{\circ}Brix$ to $8.5{\circ}Brix$, and reducing sugar content was changed from 9.66% to 6.44%. Alcohol content and acidity increased to 7.0% and from 0.19% to 0.24%, respectively. No changes in acidity, pH, and sugar content were observed during the aging, but reducing sugar and solid contents decreased. When apple wine was fultered through $0.45\;{\mu}m$ nitrocellulose membrane followed by various ultrafiltration membranes with different molecular weight cut-off values, the initial flux $(121.2\;liter/m^2/h)$ and the average flux of Biomax 100k membrane were the highest among the membranes used. These membrane filtration treatments resulted in complete removal of microorganisms as well as decrease in turbidity and solid content without changes in other chemical properties. No changes in the physicochemical properties of the apple wine and no microorganisms were detected during the storage at $156{\circ}C$ for 6 weeks.

• Applied Biological Chemistry
• /
• v.8
• /
• pp.95-100
• /
• 1967

A quantitative study on the mercury residue in the brown rice of "Paldal", a recommended rice variety in Korea, was carried out by changing the date and frequency of application with different forms of organo-mercury fungicide(PMA), which is used for the control of rice blast. The results are summarized follows: 1) Mercury residues were higher with the emulsion formulation(0.21 ppm) than the dust formulation (0.16 ppm) when they were used for the control of leaf blast on July 13. 2) In case when both of the emulsion and dust formulations were used on July 13 and August 13, respectively, the mrecury residues were lower in the treatment on July 13 (0.216 and 0.16 ppm) than in the treatment on August 13 (0.304 and 0.238 ppm). 3) In an emulsion formulation was applied once on August 13, the mercury residue was 0.304 ppm and its application in twice on July 13 and August 13, the residue was counted 0.32 ppm. In case of dust formulation, the residues were observed 0.238 ppm in a single dose and 0.276 ppm in double application. 4) When the fungicide was applied to the rice plant on August 13, the mercury residues in brown rice, rice bran, and stalk and leaves were 0.304, 0.323, and 0.676 ppm, respectively found in the case of emulsion and in the case of dust formulation, they were 0.238, 0.283 and 0.698 ppm, respectively. The mercury residue, in general, were less in the case of dust than in the case of emulsion formulation and lowered by a single treatment than by two times application and it was also less by treating on July 13 than by treating on August 13.