• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.8
• /
• pp.261-270
• /
• 2014

As Internet traffic increases recently, much effort has been put on improving the performance of a web server. In addition to hardware side solutions such as replacement by high-end hardware or expansion of the number of servers, there are software side solutions to improve performance. Recent studies on these software side solutions have been actively performed. In this paper, we identify performance degradation problems occurring in a conventional TCP networking reception process and propose a way to solve them. We improve performance by combining three kinds of existing methods for Linux Networking Performance Improvement and two kinds of newly proposed methods in this paper. The three existing methods include 1) an allocation method of a packet flow to a core in a multi-core environment, 2) ITR(Interrupt Throttle Rate) method to control excessive interrupt requests, and 3) sk_buff data structure recycling. The two newly proposed methods are fd data structure recycling and epoll_event data structure recycling. Through experiments in a web server environment, we verify the effect of our two proposed methods and its combination with the three existing methods for performance improvement, respectively. We use three kinds of web servers: a simple web server, Lighttpd generally used in Linux, and Apache. In a simple web server environment, fd data structure recycling and epoll_event data structure recycling bring out performance improvement by about 7 % and 6%, respectively. If they are combined with the three existing methods, performance is improved by up to 40% in total. In a Lighttpd and an Apache web server environment, the combination of five methods brings out performance improvement by up to 36% and 20% in total, respectively.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.339-342
• /
• 2011

This paper proposes a network-based mobility control scheme in wireless/mobile networks, which is based on the Locator-Identifier Separation Protocol (LISP). Compared to the existing LISP mobility scheme, the proposed scheme is featured by the following two points: 1) each LISP Tunnel Router (TR) is implemented at the first-hop access router that mobile nodes are attached to, and 2) for handover support, the LISP Routing Locator (RLOC) update operation is performed between Ingress TR and Egress TR. By numerical analysis, it is shown that the proposed scheme can reduce the handover latency much more than the other candidate schemes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.114-117
• /
• 2004

Rates of $H_2$ uptake into $Pt/MoO_3$ were measured for the noncalcined and $200^{\circ}C$ calcined $Pt/MoO_3$. Amount of $H_2$ uptake for $200^\circ{C}$calcined $Pt/MoO_3$ was greater than the amount of noncalcined $Pt/MoO_3$. From these two experiments, it was found that the rates of $H_2$ desorption were proportional to the increase of desorption temperature. XPS demonstrated that Cl reduced more faster in ITR after calcination at $200^{\circ}C$. This inducd smaller amount of residual chlorine at adlineation sites between Pt and $MoO_3$ substrates. This resulted in opening the more channel of hydrogen pathway into more $MoO_3$particles and controled the kinetics of hydrogen uptake.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.13-15
• /
• 2004

The current driven in an MOSFET is limited by the intrinsic channel resistance. All the other parasitic elements in a device structure play a significant role and degrade the device performance. These other resistances need to be less than 15％ of the channel resistance. To achieve the requirements, we should investigate the methodology of separation and quantification of those resistances. In this paper, we developed the extraction method of resistances using calibrated TCAD simulation. The resistance of the extension region is also partially determined by the formation of a surface accumulation region that forms under the gate in the tail region of the extension profile. This resistance is strongly affected by the abruptness of the extension profile because the steeper the profile is, the shorter this accumulation region will be.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.1 s.232
• /
• pp.87-94
• /
• 2005

A computer code for Electrical Capacitance Tomography (ECT) is developed to sense the cross sectional phase distribution of two-phase flow in the rectangular pipe in which the tomography sensor furnished by the insulated wall, electrodes, and electric field screen. The computer code had two steps for the image reconstruction. In the forward projection step, the sensitivity matrix was constructed based on the electric field calculated by the finite difference method. In the backward projection step, the sensitivity matrix and the measured capacitances were used to reconstruct the cross sectional image. Several algorithms including LBP, TR, ITR, and PLI were employed to find the proper one for the two-phase flow analysis. Since the dielectric constant of the water in two-phase flow is sensitive to the thermal parameter such as, temperature and pressure, the developed code was evaluated to find their accuracy, speed of calculation, and sensitivity to the variation of the dielectric constant. It was found that the iterative methods are superior to the direct methods for the image reconstruction, and the PLI method was the best in the variation of the dielectric constants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.4
• /
• pp.282-285
• /
• 2004

Kinetics of H-spillover over $Pt/MoO_3$ was greatly affected by the amount of residual chlorine differing by calcination temperature. Multifacetted techniques for characterization were dedicated to elucidate the faster reduction of chlorine in the isothermal reduction (ITR) at $50^circ{C}$ after calcination. Reduction of residual chlorine over Platinum resulted in opening the more channel of hydrogen pathway into more $MoO_3$ particles and controlling the kinetics of hydrogen uptake.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.279-289
• /
• 2000

Residual stress induced in U-bending and tube-to-tubesheet joint processes of PWR's row-1 heat exchanger tube was measured by X-ray method and Hole-Drilling Method(HDM). Compressive residual stresses(-) at the extrados surface were induced in U-bending, and its maximum value reached -319 MPa in axial direction at the position of $\psi$ = $0^{\circ}$. Tensile residual stresses(+) of $\sigma_{zz}$ = 45 MPa and $\sigma_{\theta\theta}$ = 25 MPa were introduced in the intrados surface at the position of $\psi$ = $0^{\circ}$. Maximum tensile residual stress of 170 MPa was measured at the flank side at the position of $\psi$ = $90^{\circ}$, i.e., at apex region. It was observed that higher stress gradient was generated at the irregular transition regions (ITR). The trend of residual stress induced by U bending process of the tubes was found to be related with the change of ovality. The residual stress induced by the explosive joint method was found to be lower than that by the mechanical roll method. The gradient of residual stress along the expanded tube was highest at the transition region (TR), and the residual stress in circumferential direction was found to be higher than the residual stress in axial direction.

• Korean Journal of Microbiology
• /
• v.30 no.3
• /
• pp.225-231
• /
• 1992

l o identil) ;~nclc li~iracterize; In iiscorhate oxiililinp enzyme in ('/rItrn~i~rlon~ir~c~t~itr~~lr.o\ r(1rii. we studicil ;is li)llows. Ascorh;ric oxiiliring cn/;jme activit) f ~ o ~thne crude extract 01' ( ' / ~ l o n ~ ~ . c l o t ~1~~oit~rl~1oin~/.t\ii W;I\ dctccietl by 5pecific active 5ta1ning through nati\e gel cletrophorcsi\ and ~iltra\~iolestp eciroscopy. Ascorb~ttco xidizing c n ~ y m ew i15 partilly 1~1rilieJ by \;~riousp roccclurcs inclucli~lga rnmoniu~ns uIl';~tcp recipit;iion. aJ\orption ~111-om;~togrophy on Iiy~lroxyapaiitca nd Scphailcx <;-I50 gel lillration chrornatogral>liy. Plie ~nolecularw eight 01' the nativc cnrytiic was ahour 88.000 tlalton hy nativc gel elcciroplloresis anci subunit niolecul;ir ~rciglit 55,000 ol' this cnrymc w;~c determined hy SIIS-P.ASI!. The optimum tcmper~tture ii)r the cnrymc nos ahout 5j$^{\circ}$C and pH 4.6 was the optimum. Moreover. ascorhaie oxi~losc in C: reinhardtii was confirmet1 by Ll1e\tcrn blotting technique.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.42-43
• /
• 2002

반도체 디바이스의 발전은 높은 직접화 및 동작 속도를 추구하고 있으며, 이를 위해서 MOSFET의 scale down시 발생되는 문제를 해결해야만 한다. 특히, Channel이 짧아짐으로써 발생하는 device의 열화현상으로 동작전압의 조절이 어려워 짐을 해결해야만 하며, gate oxide 두께를 줄임으로써 억제할 수 있다고 알려져 왔다. 현재, gate oxide으로 사용되고 있는 SiO2박막은 비정질로써 ～8.7 eV의 높은 band gap과 Si기판 위에서 성장이 용이하며 안정하다는 장점이 있으나, 두께가 1.6 nm 이하로 얇아질 경우 전자의 direct Tunneling에 의한 leakage current 증가와 gate impurity인 Boron의 channel로의 확산, 그리고 poly Si gate의 depletion effect[1,2] 등의 문제점으로 더 이상 사용할 수 없게 된다. 2001년 ITRS에 의하면 ASIC제품의 경우 2004년부터 0.9～l.4 nm 이하의 EOT가 요구된다고 발표하였다. 따라서, gate oxide의 물리적인 두께를 증가시켜 전자의 Tunneling을 억제하는 동시에 유전막에 걸리는 capacitance를 크게 할 수 있다는 측면에서 high-k 재료를 적용하기 위한 연구가 진행되고 있다[3]. High-k 재료로 가능성 있는 절연체들로는 A1₂O₃, Y₂O₃, CeO₂, Ta₂O, TiO₂, HfO₂, ZrO₂,STO 그리고 BST등이 있으며, 이들 재료 중 gate oxide에 적용하기 위해 크게 두 가지 측면에서 고려해야 하는데, 첫째, Si과 열역학적으로 안정하여 후속 열처리 공정에서 계면층 형성을 배제하여야 하며 둘째, 일반적으로 high-k 재료들은 유전상수에 반비례하는 band gap을 갖는 것으로 알려줘 있는데 이 Barrier Height에 지수적으로 의존하는 leakage current때문에 절연체의 band gap이 낮아서는 안 된다는 점이다. 최근 20이상의 유전상수와 ～5 eV 이상의 Band Gap을 가지며 Si기판과 열역학적으로 안정한 ZrO₂[4], HfiO₂[5]가 관심을 끌고 있다. HfO₂은 ～30의 고유전상수, ～5.7 eV의 높은 band gap, 실리콘 기판과의 열역학적 안전성 그리고 poly-Si와 호환성등의 장점으로 최근 많이 연구가 진행되고 있다. 또한, Hf은 SiO₂를 환원시켜 HfO₂가 될 수 있으며, 다른 silicide와 다르게 Hf silicide는 쉽게 산화될 수 있는 점이 보고되고 있다.

• Biomolecules & Therapeutics
• /
• v.3 no.4
• /
• pp.316-321
• /
• 1995

All the pharmacological studies of LB17522 described here were carried out with high doses (fifteen to sixty times of the therapeutic dose) to determine an indication of potential side effects in clinical use in terms of the acute clinical signs, cardiovascular and central nervous system. LB10522 does not produce any observable clinical signs except for the symptoms such as moist eye, skin rash, slight salivation, vomitting, and slightly reduced activity. The effects of LB10522 on the hemodynamics and cardiac function of anesthetized beagle dogs are as follows; heart rates and mean arterial blood pressure had a tendency to increase mildly, which is a normal finding in anesthetized dogs. All the animals except for one showed relatively stable respiratory rates throughout the observation period. Each animal treated with LB10522 showed slight increase in the left cardiac work and left ventricular stroke work which are mainly related to corresponding increases in cardiac output. Femoral blood flow were shown to be increased in some animals treated with LB10522. The epileptogenic activities of various cephalosporins were assessed by a direct intracerebral injection of appropriate concentration of test articles. The CD$_{50}$ values (nmol) obtained from the analysis of the dose-response data are as follows; 78.2, 175.3, 156.3, and 53.5 for cefazolin, cephaloridine, ceftazidime, and LB 10522, respectively. LB10522 seems to be equipotent with cefazolin or to be three times more potent than cephaloridine and ceftazidime in causing adverse CNS stimulation. Taken into consideration all the information obtained, LB10522 is not supposed to induce much changes in the functions examined in these studies in man at therapeutic doses.s.