• Journal of Surface Science and Engineering
• /
• v.40 no.2
• /
• pp.98-102
• /
• 2007

[ $NiCl_2$ ] and poly-L-lysine coated protein chip plates have been fabricated using a spin coating system. Water has been used as solvent and scratching effects on glass slides and ITO have been investigated. We also observed the surface properties of $NiCl_2$ and poly-L-lysine coated slides by using PSA(Particle size analyzer) and AFM(Atomic force microscope). The AFM results imply that the surface patterns created in the spin coating system determine the protein adsorption. Adsorption of histidine-tagged KRS proteins immobilized on glass slides and ITO was analyzed using a BAS image system. The results suggest that the scratching effect was increased ability of protein adsorption.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.705-716
• /
• 2017

In this study, Indium-Titanium hydroxide particle with 0.5, 1.0, 1.5 wt% of $TiO_2$ were synthesized by sol process and adding the base, ITiO(Indium Titanium Oxide) particles were obtained by gelling at $200^{\circ}C$ and $500^{\circ}C$. The ITiO particle's size with gel process at $200^{\circ}C$ was smaller than ITiO particle's size with gel process $500^{\circ}C$. The ITiO particle with gel process at $200^{\circ}C$ was used to fabricate dense ITiO target. ITiO targets with 0.5, 1.0, 1.5 wt% of $TiO_2$ were fabricated and used to obtain ITiO thin films onto glass by sputtering. Among those sputtered ITiOs' thin films, ITiO thin film with 0.4 % of $O_2$ and 0.5 wt% of $TiO_2$ showed the lowest specific resistance, highest charge mobility and lowest carrier concentration. It was found the light transmittance of the ITiO film were increased highly compared to light transmittance of ITO (Indium Tin Oxide) thin film over Infrared wavelength ranges.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.30-31
• /
• 2009

전하가 다른 두 종류의 토너입자를 ITO 기판에 격벽 높이의 차이를 두어 제작한 패널을 사용하였다. 토너입자를 충전할 때 동일한 격벽 높이의 패널을 사용하는 것과 서로 다른 패널을 사용하여 합착, 2가지 type을 제작하였다. 제작된 패널을 전압별로 구동하고 각 구동전압에서의 광특성을 측정하였다. 셀 내부에 충전되어 있는 입자보다 운동량이 적은, 즉 셀 내부에서도 격벽 표면에 흡착되어 있는 토너입자들이 구동과 광특성에 어떠한 영향을 미치는지 평가하였다.

• Korean Membrane Journal
• /
• v.5 no.1
• /
• pp.54-60
• /
• 2003

The rejection properties and flux rates of silica nanoparticles in ultrafiltration membranes has been investigated. Cross-flow permeation experiments were conducted using polycarbonate track-etch flat membranes with pore sizes of 30 and 50 nm, and a silica nanoparticle solute with particle sizes of 5 and 18 nm with narrow size distributions. The fluxes and rejection factors were investigated at various particle concentrations, cross-flow velocities, pH, and ionic strengths of solution. Even though the size of the silica nanoparticles was much smaller than that of the membrane pores, the observed rejection rates were very high compared with those for a similar-sized polymer (dextran). The observed rejection rate decreased with increasing ionic strength, which implies that the transport mechanism of the silica nanoparticles is significantly influenced by electrostatic repulsion between particles and membranes.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.1
• /
• pp.36-38
• /
• 2013

Eight sample panels using an indium tin oxide(ITO)-coated glass substrate were fabricated, with barrier ribs formed of 55 ${\mu}m$ height and 10 ${\mu}m$ width. The upper and lower substrates were designed with the same panel condition, so a cell gap of 110 ${\mu}m$ was obtained. The charged particles in a cell consisted of $TiO_2$ (for white color) or carbon black (black color), negative or positive charge control agents, and a polymer. The average diameter of the two types of particles was commonly 10 ${\mu}m$, and their q/m value was -4.5 ${\mu}C/g$ and +4.5 ${\mu}C/g$, respectively. The electrically opposite particles mixed by an agitator were loaded into their cells by a simple particle-loading method. The discharging process proceeded at a humidity of 80% and a temperature of $30^{\circ}C$. Reflectivity was measured depending on discharging time, and a hysteresis curve by bias voltage obtained for comparison between the neutralized and non-neutralized panel, in which the superior optical property of the neutralized panel was ascertained.

• International Journal of High-Rise Buildings
• /
• v.1 no.2
• /
• pp.87-97
• /
• 2012

The indoor environments in high-rise buildings are generally well enclosed by defined boundary conditions. Here, a numerical simulation method based on the Lattice Boltzmann method (LBM), which aims to model and simulate the turbulent flow accurately in an enclosed environment, and its comparison with traditional computational fluid dynamics (CFD) results, are presented in this paper. CFD has become a powerful tool for predicting and evaluating enclosed airflows with the rapid advance in computer capacity and speed, and various types of CFD turbulence modeling and its application and validation have been reported. The LBM is a relatively new method; it involves solving of the discrete Boltzmann equation to simulate the fluid flow with a collision model instead of solving Navier-Stokes equations. In this study, the LBM-based scheme of flow pattern and particle dispersion analyses are validated using the benchmark test case of two- and three-dimensional and isothermal conditions (IEA/Annex 20 case); the prediction accuracy and advantages are also discussed by comparison with the results of CFD.

• Journal of the Korean Mathematical Society
• /
• v.41 no.5
• /
• pp.773-793
• /
• 2004

We consider a system of particles with locations { $X_{i}$ $^{n}$ (t):t$\geq$0,i＝1,…,n} in $R^{d}$ , time-varying weights { $A_{i}$ $^{n}$ (t) : t $\geq$0,i ＝ 1,…,n} and weighted empirical measure processes $V^{n}$ (t)＝1/n$\Sigma$$_{i=1}$$^{n}$ $A_{i}$ $^{n}$ (t)$\delta$ $X_{i}$ $^{n}$ (t), where $\delta$$_{x}$ is the Dirac measure. It is known that there exists the limit of { $V_{n}$ } in the week* topology on M( $R^{d}$ ) under suitable conditions. If { $X_{i}$ $^{n}$ , $A_{i}$ $^{n}$ , $V^{n}$ } satisfies some diffusion equations, applying Ito formula, we prove a central limit type theorem for the empirical process { $V^{n}$ }, i.e., we consider the convergence of the processes η$_{t}$ $^{n}$ ≡ n( $V^{n}$ -V). Besides, we study a characterization of its limit.t.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.170-174
• /
• 2017

In 3 electrode reflective displays using a plastic substrate, unstable packaging induces particle clumping and optical degradation due to external air inflow and electronic ink evaporation. In this work, we fabricate 3 electrode electronic paper using glass wafer, ITO/plastic film, and ITO/glass/gas barrier film as an upper substrate after injecting electronic ink onto the lower substrate. Then, we studied its properties. After operating under stress conditions for 336 hours at $85^{\circ}C$ and 75% humidity, the reflectivity of driven e-paper panels with white color was 25.5% for the panels using glass wafer, 22.5% for plastic film including a gas barrier layer, and 16% for plastic film only. From these optical properties, we conclude that gas barrier film improves upper film isolation as a desirable packaging method.

• Journal of Powder Materials
• /
• v.18 no.4
• /
• pp.347-358
• /
• 2011

Two different schemes were adopted to fabricate ordered macroporous structures with face centered cubic lattice of air spheres. Monodisperse polymeric latex suspension, which was synthesized by emulsifier-free emulsion polymerization, was mixed with metal oxide ceramic nanoparticles, followed by evaporation-induced self-assembly of the mixed hetero-colloidal particles. After calcination, inverse opal was generated during burning out the organic nanospheres. Inverse opals made of silica or iron oxide were fabricated according to this procedure. Other approach, which utilizes ceramic precursors instead of nanoparticles was adopted successfully to prepare ordered macroporous structure of titania with skeleton structures as well as lithium niobate inverted structures. Similarly, two different schemes were utilized to obtain disordered macroporous structures with random arrays of macropores. Disordered macroporous structure made of indium tin oxide (ITO) was obtained by fabricating colloidal glass of polystyrene microspheres with low monodispersity and subsequent infiltration of the ITO nanoparticles followed by heat treatment at high temperature for burning out the organic microspheres. Similar random structure of titania was also fabricated by mixing polystyrene building block particles with titania nanoparticles having large particle size followed by the calcinations of the samples.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.948-951
• /
• 2005

New technology that reduces photolithography process steps from 4 to 3 in fabrication of TFT LCD is introduced. The core technology for 3mask-TFTs is the lift-off process [1], by which the PAS and PXL layer are formed simultaneously. To evaluate the stability of this lift-off process, outgases from photo resist on a substrate during ITO deposition and the quality of ITO film were analyzed and the conventional photo resist stripper machine which operates lift-off process was examined to see its ability to reduce particle problems of the machine. Through the development of total process and design for TFTs using this 3mask technology, panels in TN and IPS modes which exhibit same performances of a display using a conventional process were achieved. In addition, this process was already verified in the mass production line and now some products are being produced by the 3mask technology.