• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.138-140
• /
• 2003

In this paper, It is introduced to electromagnetic sound by AC motor and example of application by experiments. And Through adjusting some design parameter related to Mass, Damping coefficient and Stiffness of the system, we could find best design point to reduce motor total noise as well as noise component at AC power frequency (2f).

• Smart Structures and Systems
• /
• v.6 no.9
• /
• pp.1007-1023
• /
• 2010

This paper describes the development and evaluation of an innovative TDR distributed moisture sensor. This sensor features advantages of being responsive to the spatial variations of the soil moisture content. The geometry design of the sensor makes it rugged for field installation. Good linear calibration is obtained between the sensor measured dielectric constant and soil physical properties. Simulations by the finite element method (FEM) are conducted to assist the design of this sensor and to determine the effective sampling range. Compared with conventional types of moisture sensor, which only makes point measurement, this sensor possesses distributed moisture sensing capability. This new sensor is not only easy to install, but also measures moisture distribution with much lower cost. This new sensor holds promise to significantly improve the current field instruments. It will be a useful tool to help study the influence of a variety of moisture-related phenomena on infrastructure performance.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.77-83
• /
• 2018

Nowadays, as IT industry is being developed, many studies are in progress in the areas of user interface (UI) and user experience (UX) and interest in the icons related to these areas are rising accordingly. IT developments have also influenced the vessel sector promoting the development of navigation equipment and systems utilizing IT. However, due to complicated functions of navigation equipment and systems, concerns have been noted about the increased cognitive burden on officers, along with the need for researches on reducing such burden. This study, therefore, was conducted focusing on the design of icons that will reduce cognitive burden on officers when using a typical navigation equipment such as ECDIS(Electric Chart Display and Information System). Based on a survey conducted with experts who have rich experiences in navigation and are currently teaching ECDIS in universities, the present study identified the functions of ECDIS, for which icons should be designed. Accordingly, suitable icons for ECDIS were designed and their effects were evaluated. It is expected that the results of this study will be used as basic data for the design of icons for other navigation equipment in the future.

• Water Engineering Research
• /
• v.1 no.4
• /
• pp.259-266
• /
• 2000

Scour hole is formed due to the high shear stress of the jet flow at the outlet of a hydraulic structure and vortex erosion occurs in the scour hole. It is important to determine the amount of vortex erosion occurs in the scour hole. It is important to determine the amount of vortex erosion for the design of bed protection. If the vortex erosion continues and reaches to the hydraulic structure, it causes the deformation of the structure itself. To obtain the amount of the vortex erosion, it is necessary to determine the shear velocity of the line vortex in the scour hole was derived by the theory of energy conservation and found to be related to the upstream overflow velocity. The amount of vortex erosion from the scour hole was obtained using entrainment equation for given value of shear velocity. For a design purpose, if the flow velocity at the end of an apron and the properties of bed material are given, the amount of vortex erosion was obtained.

• Journal of Multimedia Information System
• /
• v.3 no.4
• /
• pp.111-118
• /
• 2016

Today, the proliferation of various mobile devices, such as smart phones and tablet PC, brought changes in the existing TV viewing behavior. People use smart devices as secondary device while watching TV. Researches on a wide range of services linked with second-screen devices around the smart TV in the home network have been actively conducted. While there exist several Web-related technologies for connections between devices, specialized techniques for a second screen service are quite insufficient. There are still some problems related to the display of contents from multiple devices and the efficient transfer of these contents. Considering the characteristics of broadcasting systems In this study, we focus on a second screen service that permits a dynamic transfer of contents by connecting a television (TV) with mobile devices. Here, we propose a second screen service model to enable the personalization of TV contents by combining the existing broadcasting and Web-related techniques.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1116-1123
• /
• 2024

-In recent years, unmanned underwater vehicles (UUV) have been vigorously developed, and with the continuous deepening of marine exploration, traditional energy can no longer meet the energy supply. Nuclear energy can achieve a huge and sustainable energy supply. The heat pipe reactor has no flow system and related auxiliary systems, and the supporting mechanical moving parts are greatly reduced, the noise is relatively small, and the system is simpler and more reliable. It is more favorable for the control of unmanned systems. The use of heat pipe reactors in unmanned underwater vehicles can meet the needs for highly compact, long-life, unmanned, highly reliable, ultra-quiet power supplies. In this paper, a heat pipe reactor scheme named UPR-S that can be applied to unmanned underwater vehicles is designed. The reactor core can provide 1 MW of thermal power, and it can operate at full power for 5 years. UPR-S has negative reactive feedback, it has inherent safety. The temperature and stress of the reactor are within the limits of the material, and the core safety can still be guaranteed when the two heat pipes are failed.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.5
• /
• pp.321-329
• /
• 2007

The present pipe modeling method requires detailed inputs from a designer to generate a pipe model, and thus it takes much time for the designer to perform such task. Moreover, the pipe model has no relation with the hull structure. Thus, it is time-consuming and requires much effort if design changes arise. In this study, a generating method that generates quickly many pipes using a pipe tray and a conversion method that converts automatically the pipes into objects related with the hull structure are proposed. A pipe modeling system based on the proposed methods is developed. The applicability of the developed system is demonstrated by applying it to the generation of the pipe model of a deadweight 300,000 ton VLCC(Very Large Crude oil Carrier). The results show that the developed system can quickly generate the pipe model in relation with the hull structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.877-880
• /
• 2003

In a competitive and globalized business environment, the need for the green products becomes stronger. To meet these trends, the environmental assessment besides delivery, cost and quality of products should be considered as an important factor in new product development phase. In this paper. a knowledge-based approximate life cycle assessment system (KALCAS) for the collaborative design environment is developed to assess the environmental impacts in context of product concept development. It aims at improving the environmental efficiency of the product using artificial neural networks consisting of high-level product attributes and LCA results. The overall framework of the collaborative environment including KALCAS is proposed. This architecture uses the CO environment to allow users on a wide variety of platforms to access the product data and other related information. It enables us to trade-off the evaluation results between the objectives of the product development including the approximate environmental assessment in the collaborative design environment.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.127-132
• /
• 2019

This paper presents an overview of automotive communication technologies, including related technology developments. We describe the latency of Audio Video Bridge (AVB) network as well as purpose the optimized design of the Ethernet network system for automotive. Our design plays a significant role in reducing the delay between components. The proposed approach on realistic test cases showed that there was a delay reduction, approximately 49.4%. It is expected that the optimization method for the actual automotive environment can greatly shorten the time period in the design and development process. The results obtained from the experiments on the delay time present in each function are reliable because average values are obtained through repeated actual tests for several months. It will greatly benefit the industry since analyzing the latency between each function in a short period of time is very important.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.144-152
• /
• 2013

Design is an iterative, generative, and multidisciplinary process by its nature. Iteration occurs often in most of the engineering design and development projects including construction. Design iterations cause rework, and extra efforts are required to get the optimal sequence and to manage the projects. Contrary to simple design, isolation of the generative iterations in complex design systems is very difficult, but reduction in overall iterations is possible. Design depends upon the information flow within domain and also among various design disciplines and organizations. Therefore, it is suggested that managers should be aware about the crucial iterations causing rework and optimal sequence as well. In this way, managers can handle design parameters related to such iterations pro-actively. There are a number of techniques to reduce iterations for various kinds of engineering designs. In this paper, parameter based Design Structure Matrix (DSM) is chosen. To create this DSM, a survey was performed and then partitioned using a model. This paper provides an easy approach to those companies involved in or intend to be involved in "design and build projects".