• Journal of the Korean GEO-environmental Society
• /
• v.19 no.2
• /
• pp.23-35
• /
• 2018

Recently, ground disasters such as road collapses and cavities have been frequently occurred in Seoul and downtown areas. As a result, studies on the integrated underground space map is underway as a government's solution. On the other hand, the geotechnical information underlying the integrated underground space map has been being built with more than 220 thousands borehole DB informations through the Integrated DB Center of National Geotechnical Information. To build a three-dimensional integrated underground space map based on the geotechnical information, the reliability of the geotechnical information should be verified by analyzing and evaluating the precision of the geotechnical information. Thereby, studies were conducted on the precision verification and evaluation of the constructed geotechnical information. Thereafter, it has been reviewed how to utilize geotechnical information in addition to analyzing the precision of the geotechnical information in order to visualize three dimensions in geotechnical information. As a further step to the practical DB application, a module is suggested in this study to improve the precision of geotechnical information for establishing reliable three dimensional integrated underground space maps based on the previous research results.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.4
• /
• pp.57-67
• /
• 2014

The vigor condition of trees is an important indicator for the management of urban forested area. But difficulties in how to assess the tree vigor condition still remain. Previous efforts were limited in the 1) measurement of single indicator rather than using multiple indices, 2) purpose-oriented measurement such as for air-pollution effect or specific pathological symptom, and 3) ordinal-scale evaluations by field crews 4) despite human errors based on his/her experiences or prior knowledge. Therefore, this study attempted to develop a quantitative and objective methodology for assessing tree vigor condition, by measuring multiple modules and building the profile inventory. Furthermore, the possibility and limitations were discussed in terms of schematic frames describing tree vigor condition. The vigor condition of 56 flowering cherry plants in urban park were assessed by in-situ measurements of following eight items; growth of crown(Gc), growth of shoots, individual tree volume(Vol), plant area index, woody area index, leaf area index, leaf chlorophyll content(Lc) and leaf water content(Lw). For validation, these measurements were compared with the ranks of holistic tree vigor condition, which were visually assessed using a 4-point grading scale based on the expert's knowledge. As a result, the measures of each evaluation item successfully highlighted a variety of aspects in tree vigor condition, including the states of both photosynthetic and non-photosynthetic parts. The variation in the results depending on evaluated parts was shown within an individual tree, even though the broad agreement among the results was found. The result of correlation analysis between the tested measurements and 4-point visual assessment, demonstrated that the state of water-stressed foliage of the season (Lw) or the development of plant materials since sapling phase (Vol) could be better viewed from the outer appearance of trees than other symptoms. But only based on the visual assessment, it may be difficult to detect the quality of photosynthesis (Lc) or the recent trend in growth of trees (Gc). To make this methodology simplified for the broad-scale application, the tested eight measurements could be integrated into two components by principal component analysis, which was labelled with 'the amount of plant materials' and 'vigor trend', respectively. In addition, the use of these quantitative and multi-scale indicators underlies the importance of assessing various aspects of tree vigor condition, taking into account the response(s) on different time and spatial scale of pressure(s) shown in each evaluated module. Future study should be advanced for various species at diverse developing stages and environment, and the application to wide areas at a periodic manner.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.341-347
• /
• 2009

Experiments and computations were conducted to investigate the heat insulation characteristics of multi layer materials for cultivation greenhouse. In case of the experiments, measurements of temperature were carried out with a K-type thermocouples and data logger to research the heat transfer in the experimental module generated by the heat source. A thermal conductivity meter, QTM-500 based on modified transient hot wire method was used to measure the thermal conductivity of multi layer materials. The numerical analyses were performed by commercial code CFX-11 according to the variation of multi layer materials without air layer. The experimental results showed that the heat insulation of multi layer materials was higher than single layer materials by 50~90%. It was found that the effect of heat insulation was raised by the combination of multi layer materials.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.59-64
• /
• 2008

D. W. KANG, J. S. CHOI, and G. R. TACK, A Study on Real-Time Sports Activity Classification & Monitoring Using a Tri-axial Accelerometer. Korean Jouranl of Sport Biomechanics, Vol. 18, No. 2, pp. 59-64, 2008. This study was conducted to study the real-time sports activity classification and monitoring using single waist mounted tri-axial accelerometer. This monitoring system detects events of sports activities such as walking, running, cycling, transitions between movements, resting and emergency event of falls. Accelerometer module was developed small and easily attachable on waist using wireless communication system which does not constrain sports activities. The sensor signal was transferred to PC and each movement pattern was classified using the developed algorithm in real-time environment. To evaluate proposed algorithm, experiment was performed with several sports activities such as walking, running, cycling movement for 100sec each and falls, transition movements(sit to stand, lie to stand, stand to sit, lie to sit, stand to lie and sit to lie) for 20 times each with 5 healthy subjects. The results showed that successful detection rate of the system for all activities was 95.4%. In this study, through sports activity monitoring. it was possible to classify accurate sports activities and to notify emergency event such as falls. For further study, the accurate energy consumption algorithm for each sports activity is under development.

• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.363-378
• /
• 2006

The Digital Multimedia Broadcasting(DMB) system is developed to offer high quality audio-visual multimedia contents to the mobile environment. The system adopts MPEG-4 standard for the main video, audio and other media format. It also adopts the MPEG-4 scene description for interactive multimedia contents. The animated and interactive contents can be actualized by BIFS(Binary Format for Scene), the binary format for scene description that refers to the spatio-temporal specifications and behaviors of the individual objects. As more interactive contents are, the scene description is also needed more high bitrate. However, the bandwidth for allocating meta data such as scene description is restrictive in mobile environment. On one hand, the DMB terminal starts demultiplexing content and decodes individual media by its own decoder. After decoding each media, rendering module presents each media stream according to the scene description. Thus the BIFS stream corresponding to the scene description should be decoded and parsed in advance of presenting media data. With these reason, the transmission delay of BIFS stream causes the delay of whole audio-visual scene presentation although the audio or video streams are encoded in very low bitrate. This paper presents the effective optimization technique for adapting BIFS stream into expected MPEG-2 TS bitrate without any bandwidth waste and avoiding the transmission delay of the initial scene description for interactive DMB contents.

• Journal of Korean Society on Water Environment
• /
• v.26 no.5
• /
• pp.841-849
• /
• 2010

Soil erosion is an natural phenomenon. However accelerated soil erosion has caused many environmental problems. To reduce soil loss from a watershed, many management practices have been proposed worldwide. To develop proper and efficient soil erosion best management practices, soil erosion rates should be estimated spatially and temporarily. The Universal Soil Loss Equation (USLE) and USLE-based soil erosion and sediment modelling systems have been developed and tested in many countries. The Sediment Assessment Tool for Effective Erosion Control (SATEEC) system has been developed and enhanced to provide ease-of-use interface to the USLE users. However many researchers and decision makers have requested to enhance the SATEEC system for simulation of soil erosion and sediment reflecting effects of single storm event. Thus, the SATEEC R factors were estimated based on 5 day antecedent rainfall data. The SATEEC 2.1 daily R factor was applied to the study watershed and it was found that the R2 and EI values (0.776 and 0.776 for calibration and 0.927 and 0.911 for validation) with the daily R were greater than those (0.721 and 0.720 for calibration and 0.906 and 0.881 for validation) with monthly R, which was available in the SATEEC 2.0 system. As shown in this study, the SATEEC with daily R can be used to estimate soil erosion and sediment yield at a watershed scale with higher accuracy. Thus the SATEEC with daily R can be efficiently used to develop site-specific soil erosion best management practices based on spatial and temporal analysis of soil erosion and sediment yield at a daily-time step, which was not possible with USLE-based soil erosion modeling system.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.153-170
• /
• 2011

OMTP (Open Mobile Terminal Platform) is a global forum made by telecommunications providers to promote user-oriented mobile services and data business. Devised by OMTP, BONDI is a browser-based application or a mobile web run-time platform to help widgets make good use of functions of mobile devices in a secure way. BONDI enables applications programmed with web standard technologies such as HTML, JavaScript, CSS, and AJAX to reach the internal functions of mobile devices. Since BONDI, which is not just a simple network application, can reach the internal resources of devices in standard ways, it enables the application and widgets to be developed regardless of tile OS or platform. Web browser-based widgets are vulnerable to the network environment, and their exeeution speed can be slowed as the operations of the widgets or applications become heavy. However, those web widgets will be continuously used thanks to the user-friendly simple interface and the faster speed in using web resources more than the native widgets inside the device. This study suggested a method to effectively operate and manage the resource of OMTP BONDI web widget and then provided an improved result based on a running performance evaluation experiment. The experiment was carried to improve the entire operating time by enhancing the module-loading speed. In this regard, only indispensable modules were allowed to be loaded while the BONDI widget was underway. For the purpose, the widget resource list, able to make the operating speed of the BONDI widget faster, was redefined while a widget cache was employed. In addition, the widget box, a management tool for removed widgets, was devised to store temporarily idle widgets.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.147-151
• /
• 2009

Purpose: 2-[$^{18}F$]Fluoro-2-deoxy-D-glucose ([$^{18}F$]FDG) particularly plays as a important role in Positron Emission Tomography (PET) imaging in nuclear medicine. Domestic [$^{18}F$]FDG auto synthesizers are installed in Seoul National University Bundang Hospital (SNUBH) at June 2008, these modules were known that it's synthetic yields were guaranteed in average $45{\pm}5%$ so far. To improve yields and convenience of domestic [$^{18}F$]FDG auto synthesizer, numerous trials in reaction time, base concentration, pressure and temperature were performed to increase [$^{18}F$]FDG yields. Materials and Methods: Several synthetic factors (temperature, time and pressure) and shortcoming were corrected based on many evaporation test. Syringe dispensing of tetra-butylammonium bicarbonate (TBAB) was replaced with micro pipette to prepare tetrabutyl ammonium fluoride salt ([$^{18}F$]TBAF). Troublesome refill of liquid nitrogen every 2 hours which was used to protect vacuum system was changed to charcoal cartridge, base guard filter. To monitor the volume of delivered $[^{18}O]OH_2$ from cyclotron by surveillance camera, we set up the volumetric vial on the cover of the module. In addition to, the recovery vial was added in [$^{18}F$]FDG production system to recover [$^{18}F$]FDG loss due to the leak of valve ($V_{13,14}$) in [$^{18}F$]FDG purification process. Results: When we used micro pipette for adding TBAB ($30\;{\mu}L$ in 12% $H_2O$ in acetonitrile), this quantitative dispensation has enabled to improve $5.5{\pm}1.7%$ residual fluorine-18 activity in fluorine separation cartridge compared to syringe adding. Besides, the synthetic yields of [$^{18}F$]FDG has increased $58{\pm}2.6%$ (n=19), $58{\pm}2.9%$ (n=14), $60%{\pm}2.5%$ (n=17) for 3 months. The life cycle of charcoal cartridge and base vacuum was 3 months prior to filling liquid nitrogen every 2 hours and additional side separator can prevent pump corrosion by organic solvent. After setting of volumetric indicator vial, the operator can easily monitor the total volume of irradiated $[^{18}O]OH_2$ from cyclotron. The recovery vial can be used for the stabilizer when an irregular [$^{18}F$]FDG loss was generated by the leak of valves ($V_{13,14}$). Conclusions: We has optimized appropriate synthetic conditions (temperature, time, pressure) in domestic [$^{18}F$]FDG auto synthesizer. In addition to, the remodeling with several accessories improve yields of domestic [$^{18}F$]FDG auto synthesizer with reliable reproducibility.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.50-56
• /
• 2011

A preliminary experimental study of new concept air hybrid engine, which stores compressed air in the tank during braking and re-use it to propel vehicle during crusing or acceleration, was carried out in this study. A single cylinder engine was modified to realize the concept of air hybrid engine. Independent variable valve lift system was adopted in one of the exhaust valves to store the compressed air into the air tank during compression period. An air injector module was installed in the place of spark plug, and the stored compressed air was supplied during the expansion period to realize air motoring mode. For air compression mode, the tank with volume of 30 liter could be charged up to more than 13 bar. By utilizing this stored compressed air, motoring work of 0.41 bar of IMEP(Indicated mean effective pressure) at maximum can be generated at the 800rpm conditions, which is higher than the case of normal idle condition by 1.1 bar of IMEP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.905-910
• /
• 2013

Road facility has the high possibility of being damaged or destroyed due to continuous pass of the vehicles, overloaded vehicles, traffic accidents and so on and stormwater manhole, sewerage manhole that are installed on the road may cause the functional degradation in case of periodic pavement of the road. So management through establishing DB of road facility and efficient updating plan are required. Thus, this study used DGPS camera for efficient establishment and improvement of road facility DB. Applicability of DGPS camera could be suggested by satisfying the allowable accuracy required for establishing DB of road facility through the comparative analysis with the result of establishment of existing road facility DB and the process of DB establishment by existing total solution could be improved through process analysis. And the existing DB of road facility was improved so that the present conditions of surrounding topography and road facility can be grasped by developing the module that can add the images of road facility to digital map and Google Earth-based KML Builder. It is expected that road facility service that provides various information can be available if the spatial data of each local self-governing body and study of automation that utilizes DGPS camera images are accomplished hereafter.