• Journal of Hydrogen and New Energy
• /
• v.33 no.4
• /
• pp.383-390
• /
• 2022

Appropriate explosion proof electrical equipment should be installed in hazardous areas. In areas where hydrogen is handled, explosion proof electrical equipment adjacent to the hydrogen handing facility must be reviewed for selection of gas group IIC (or IIB+H₂) equipment. When selecting explosion proof electrical equipment for the flammable substance handling facility in areas where hydrogen and flammable substance are handled, the method to avoid gas group IIC (or IIB+H₂) equipment has been suggested by using the operating pressure of the hydrogen handling facility. When the operating pressure of the outdoor hydrogen handling facility is 1.065 MPa or less, it has been confirmed that there is no need to install gas group IIC (or IIB+H₂) equipment for the flammable substance handling facility adjacent to the hydrogen handling facility. And the method of selecting explosion proof electrical equipment for the flammable substance handling facility has been suggested as a flowchart, so it will be able to be utilized when selecting appropriate explosion proof electrical equipment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.79-80
• /
• 2015

With the government's support for new and renewable energy, photovoltaic equipment has rapidly been supplied. However, compared to supply rate, maintenance has not supported enough and relevant research has not much conducted. Therefore, the purpose of this study is to analyze maintenance effectiveness of photovoltaic equipment. What is the most important in maintenance effectiveness is a rise in power generation. It was estimated that if photovoltaic equipment for detached houses is maintained well, power generation increases by 4.0% at least, and by 6.5% on average. As a result, it was analyzed that it is necessary to maximize the effectiveness of the government's budget investment through well maintenance of photovoltaic equipment for detached houses.

• Journal of the Korean Institute of Educational Facilities
• /
• v.6 no.3
• /
• pp.36-46
• /
• 1999

This paper seeks to show the factors, such as area and building conditions, exterior spatial conditions, and educational equipment, which affect student learning and rest activities in the school facilities. It also develops the order for the factors related to the activities. It collected available data at Shangyoung and Bongsoa Middle Schools in Chunan Chungnam, Korea. Using a t-test and multiple regression analyses, it found the factors affecting activities in different schools. It found that the facility and equipment conditions of the two schools are different. It also found that the planning objectives such as the adaptability of the facilities and equipment, information technology of the equipment, student supervision, and convenience of use of the facilities, in order, are important for planning for new buildings in urban area. And the planning objectives such as the adaptability of the facilities and equipment, the safety of the building, the convenience of use of the facilities, aesthetics, information technology of the equipment, the degree of health benefits are important in order to plan for the renovation of school buildings in urban areas. Thus, it asserts that, considering the planning objectivies developed above, a planner can construct planning objectives for new constuction or renovation of school buildings.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.801-802
• /
• 2006

The present study purposes to develop HMI software that runs on Windows CE .NET platform without being bound to specific HMI equipment and accesses data in PLC equipment through interoperation with an OPC-DA server. As the OPC-DA server reads data in PLC equipment, HMI system does not need to be configured differently for different equipments. In addition, when the interface environment of specific equipment changes, it does not require the application of new equipment or the change of communication protocol. As HMI system runs on Windows CE .NET platform, it can be configured using common embedded devices based on Windows CE .NET platform. HMI software reads data in PLC equipment through RS-232C communication interface. In addition, because it connects to an OPC-DA server through Ethernet communication interface, it can access data in PLC equipment as long as Ethernet is usable.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.506-511
• /
• 2006

To today with the acceleration due to the preference actual condition of high-class energy national income level it is together improving. It follows hereupon and it is convenient and the neat heat source is increasing a tendency where it is. It investigates the government offices building in commerce portion from the research which it sees and from the draft it analyzes a coat dosage. And comparison it analyzes the movable present condition of thread use dosage and the freezer. It presents the improvement direction against enemy conditions heat source equipment selecting. Also, currently it produces the dosage of heat source equipment and application it tries. The result, the various safety rate and the premium rate which it uses universally are considered above thread using. The reappraisal for enemy conditions heat source equipment selecting which it follows hereupon is necessary.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.39-44
• /
• 2017

In this study, we compared the perception of absolute purchase of equipment for broadcasting equipment purchasing demand according to the rapid change of domestic content production and distribution method, and the degree of information such as technical reliability and system stability of domestic broadcasting equipment perceived by consumer The effects were analyzed through a research model. Due to the lack of existing research data on broadcasting equipment demand, we conducted in depth interviews with surveys of broadcasting equipment and surveys. As a result of analysis, compared to foreign equipments, there are many cases of purchase of domestic equipments, systems, and block purchases. To improve the preference and satisfaction of Korean broadcasting equipment, which is recognized by domestic demand for broadcasting equipment, it is urgent to improve the technical reliability and to develop core key equipment and to expand the demand of domestic equipment limited to small power transmitter antenna and monitor equipment. It is urgent to develop in order to develop overseas and to support the domestic market to secure the domestic market.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.765-769
• /
• 2011

The existing portable reference equipment for ITS systems performance evaluation has several limitations. First, it is difficult to set up and operate the equipment in the road section with the shoulder width equal to or smaller than 1.5m. Secondly, the crash with a car could lead to severe accident since it is big and heavy. Lastly, it cannot collect data from multiple lanes at a time. In this research the characteristics of the USN-based portable reference equipment developed to overcome shortcomings of the existing portable reference equipment were analyzed qualitatively and its performance level was evaluated through the field test. Consequently, the USN-based portable reference equipment turned out to overcome the operational shortcomings and satisfy the performance level required for the portable reference equipment.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.168-173
• /
• 2022

As the function of a product is advanced and the process is refined, the yield in the fine manufacturing process becomes an important variable that determines the cost and quality of the product. Since a fine manufacturing process generally produces a product through many steps, it is difficult to find which process or equipment has a defect, and thus it is practically difficult to ensure a high yield. This paper presents the system architecture of how to build a smart manufacturing system to analyze the big data of the manufacturing plant, and the equipment factor analysis methodology to increase the yield of products in the smart manufacturing system. In order to improve the yield of the product, it is necessary to analyze the defect factor that causes the low yield among the numerous factors of the equipment, and find and manage the equipment factor that affects the defect factor. This study analyzed the key factors of abnormal equipment that affect the yield of products in the manufacturing process using the data mining technique. Eventually, a methodology for finding key factors of abnormal equipment that directly affect the yield of products in smart manufacturing systems is presented. The methodology presented in this study was applied to the actual manufacturing plant to confirm the effect of key factors of important facilities on yield.

• Journal of Internet Computing and Services
• /
• v.25 no.2
• /
• pp.11-19
• /
• 2024

This paper was studied abouta technology for detecting damage to temporary works equipment used in construction sites with explainable artificial intelligence (XAI). Temporary works equipment is mostly composed of steel or aluminum, and it is reused several times due to the characters of the materials in temporary works equipment. However, it sometimes causes accidents at construction sites by using low or decreased quality of temporary works equipment because the regulation and restriction of reuse in them is not strict. Currently, safety rules such as related government laws, standards, and regulations for quality control of temporary works equipment have not been established. Additionally, the inspection results were often different according to the inspector's level of training. To overcome these limitations, a method based with AI and image processing technology was developed. In addition, it was devised by applying explainableartificial intelligence (XAI) technology so that the inspector makes more exact decision with resultsin damage detect with image analysis by the XAI which is a developed AI model for analysis of temporary works equipment. In the experiments, temporary works equipment was photographed with a 4k-quality camera, and the learned artificial intelligence model was trained with 610 labelingdata, and the accuracy was tested by analyzing the image recording data of temporary works equipment. As a result, the accuracy of damage detect by the XAI was 95.0% for the training dataset, 92.0% for the validation dataset, and 90.0% for the test dataset. This was shown aboutthe reliability of the performance of the developed artificial intelligence. It was verified for usability of explainable artificial intelligence to detect damage in temporary works equipment by the experiments. However, to improve the level of commercial software, the XAI need to be trained more by real data set and the ability to detect damage has to be kept or increased when the real data set is applied.

• Journal of Korea Technology Innovation Society
• /
• v.2 no.2
• /
• pp.266-274
• /
• 1999

The world market is being restructured into one global market. The globalization makes the competition m IT industry more vigorous. It is, therefore, the vital procedures that the selection of the promising items among IT equipment and the intensive investment on the selected items to gain the competitiveness in the area of IT global market. With these in mind, in this paper, we introduce a very systematic and objective method which appraises the promise of IT equipment. The method is based on the factor Analysis which is very popular and powerful statistical technique.