• Journal of architectural history
• /
• v.23 no.4
• /
• pp.47-56
• /
• 2014

Traditional wall is ground coat, twice plater, last plaster by such a process has made a wide variety of used materials and techniques are accordingly diverse. These traditional techniques handed down the traditional walls of the techniques, rather than coming to the lowered cut off at any moment from now when the technique is used, not knowing whether to be used. Repair and restore cultural property maintenance work, it is not only the outward form hiding inside it is a technique to keep the preservation of cultural assets can be called true. When viewed from the side walls of these conventional techniques to reveal changes in the traditional process by looking at the changes in technology with traditional techniques for cause shall be made in stock. This paper is from the late Joseon Japanese occupation of techniques ranging from traditional wall to reveal the change process to its current significance of cultural property repair method to be helped.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.87-93
• /
• 2016

Since aging population in Korea is rapidly progressing, the need for improving the life quality of the elderly has been increasing. Accordingly, in order to respond in a residential environment improvement and behavior change for the elderly, architecture design and construction methods have become converted into a modular construction method and various IT systems for the elderly have been proposed. Unlike current residential design techniques for the elderly in which architectural design techniques are performed separately with IT system design, the methodology for converging architectural design techniques with IT has not been discussed and proposed. Therefore, this paper extensively studies about requirements for converging architectural design techniques with IT such as elderly behavior, residential IT Service plan factor analysis, and residential modular construction method including IT services.

• Korean Journal of Human Ecology
• /
• v.13 no.1
• /
• pp.145-152
• /
• 2004

The purpose of this study was to find out the traditional decoration techniques in the Korean costume. Both quantitative and qualitative research methods were used to collect and investigated the traditional decoration techniques used in the related literatures and museum catalogues. The results were as follows. The broad and back stitching are fundamental stitching, which used to Nubi and Keki. Top stitching applied broadly to the Korean costume, for example, Jergori, Wonsam, Jeonbok, Beosun, Bojagj and so on. The expression techniques for top stitching were one, two or three stitches. When the top stitching was used as colorful stitches, they were more decorative. The Zatmulim was used for the decorative effect on the seam line because it was triangular shaped and became more effective by changing the rotor and size. Sunmulim was used on the narrow line such as the seam lines of Gergori and Chima. The bakchi decoration was imitating a bat shape, had a meaning of bringing the goodness and gave the tiny and elaborated image. It was used to the neckline of Geogori, seam line of Chima, Pungcha Bazi and so on. Sattgi was used to attaching the bottom of two stiff fabrics adopting for Beosun, Ayam and Norigae. When it used colorful strings, the more decorative effect was added. The knot for button used the fabric instead of buttons and applied to the Cheonlik, Gergori. The aesthetic values of the traditional decoration techniques in the costume were both natural beauty and practicality with creativity.

• Journal of architectural history
• /
• v.33 no.1
• /
• pp.45-60
• /
• 2024

This study aims to examine the cutting traces remaining on the bracket tie beams of Sungnyemun gate, identifying the tools employed during the late Goryeo to early Joseon periods by specific processes, and deliberating on the timber shaping techniques utilized in advanced architectural construction during the late Goryeo to early Joseon eras. Through the research, it was confirmed that in the production of Sungnyemun Gate's bracket tie beams during the 14th to 15th centuries, both the timber splitting and ripsawing methods were used in conjunction. Moreover, the wood finishing process revealed the use of a plane. It can be inferred that the characteristics of the plane used during that time were not significantly different from those observed in the later period of the Joseon dynasty. The ripsawing and plane finishing techniques were evident in various parts of the bracket tie beams of Sungnyemun gate across the reigns of king Taejo and Sejong, indicating that the techniques involving ripsaw and plane were already prevalent in the late Goryeo period. Consequently, it can be inferred that the ripsawing and plane finishing techniques might have been applied in the construction of prominent government buildings in Hanyang(Seoul), including Gyeongbokgung Palace, and in the residences of royalty and nobility after the establishment of the Joseon dynasty.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.142-157
• /
• 2015

This study examines how traditional knowledge functions in the specific techniques to make pottery in terms of the traditional knowledge on the pottery techniques of Onggi potters. It focuses on how traditional pottery manufacturing skills are categorized and what aspects are observed with regard to the techniques. The pottery manufacturing process is divided into the preparation step of raw material, the molding step of pottery, and the final plasticity step. Each step involves unique traditional knowledge. The preparation step mainly comprises the knowledge on different kinds of mud. The knowledge is about the colors and properties of mud, the information on the regional distribution of quality mud, and the techniques to optimize mud for pottery manufacturing. The molding step mainly involves the structure and shape of spinning wheels, the techniques to accumulate mud, ways to use different kinds of tools, the techniques to dry processed pottery. The plasticity step involves the knowledge on kilns and the scheme to build kilns, the skills to stack pottery inside of the kilns, the knowledge on firewood and efficient ways of wood burning, the discrimination of different kinds of fire and the techniques to stoke the kilns. These different kinds of knowledge may be roughly divided into three categories : the preparation of raw material, molding, and plasticity. They are closely connected with one another, which is because it becomes difficult to manufacture quality pottery even with only one incorrect factor. The contents of knowledge involved in the manufacturing process of pottery focused are mainly about raw material, color, shape, distribution aspect, fusion point, durability, physical property, etc, which are all about science. They are rather obtained through the experimental learning process of apprenticeship, not through the official education. It is not easy to categorize the knowledge involved. Most of the knowledge can be understood in the category of ethnoscience. In terms of the UNESCO world heritage of intangible cultural assets, the knowledge is mainly about 'the knowledge on nature and universe'. Unique knowledge and skills are, however, identified in the molding step. They can be referred to 'body techniques', which unify the physical stance of potters, tools they employ, and the conceived pottery. Potters themselves find it difficult to articulate the knowledge. In case stated, it cannot be easily understood without the experience and knowledge on the field. From the preparation of raw material to the complete products, the techniques and traditional knowledge involved in the process of manufacturing pottery are closely connected, employing numerous categories and levels. Such an aspect can be referred to as a 'techniques chain'. Here the techniques mean not only the scientific techniques but also, in addition to the skills, the knowledge of various techniques and levels including habitual, unconscious behaviors of potters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.223-226
• /
• 2010

iPhone and Smart Phone domestic markets are activated with domestic coming out of galaxy S together and the users are increasing. It follows hereupon and with forensic techniques for the cellular phone relation criminal evidence collection of data of existing the mobile forensic engineering research is necessary in about Smart Phone where it has become new techniques and WiFi etc. Convergence. It respects Smart Phone OS star forensic technique and a tool research, iPhone Apple MAC OS X and it researches galaxy S Google Android from the present paper. Smart it uses SYN methods with Phone OS star forensic techniques and it researches in order mobile forensic description below it observes it sees and forensic application methods computer forensic methods and the tools and it researches forensic techniques. The present paper research as IT powerful country will contribute in Smart Phone forensic technical advances of Korea.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.2
• /
• pp.123-134
• /
• 2023

Fashion design, CAD production, and the use of digital software can shorten the time and production processes in the fashion industry, but there are still many limitations in how to similarly express textile textures. Having this awareness, how to implement the visual effects of textile texture similar to that of the real world in the virtual world is one of the major exploration tasks in the fashion industry. Therefore, this study aims to analyze examples of embroidery techniques in Christian Dior collections and explore how embroidery techniques in 3D CLO fashion design can express the texture of real clothes more similarly by creating virtual works through 3D samples and 3D CLO software. First, the analysis criteria and theoretical basis of this study were derived through a literature review on fashion textile embroidery techniques, identifying types and characteristics of embroidery techniques, and classifying them into 12 types. Second, photos of the Dior 2017-2023 SS/FW Ready-to-Wear collections were collected and analyzed through the case analysis VOGUE site. Third, it presents the production of 3D CLO works by deriving a method of implementing embroidery techniques through the design of sample textile embroidery techniques using substances 3D sample software. The study's has some limitations. First, in 3D CLO fashion design, the needle gap for embroidery must be widened to see the thread pattern. Second, by reducing the number of needles, it is necessary to imitate the actual embroidery effect. Third, it is judged that it will be effective to lengthen the thread and adjust the thickness of the thread. Fourth, the thickness of the entire embroidery pattern must be increased to enable a three-dimensional texture.

• KIEAE Journal
• /
• v.2 no.1
• /
• pp.11-19
• /
• 2002

This Study aims to find out the planning aspects and detailed techniques in terms of concept of the Ecological Industrial Parks. It consists of the three parts : Firstly, according to theoretical review, this study gives a definition of the concept of ecological industrial parks. Secondly, it institutes planning aspects of ecological industrial parks based on the main concept. Thirdly, 8 case studies show us analysis of detailed techniques used each planning aspects. Ecological industrial parks mean industrial systems which make energy and substance circulated in order to reduce environmental pollutions inside and outside of park like natural ecosystem. To actualize ecological industrial parks, we have to adopt 3 planning aspects which are energy and substance recycling system, environmentally-friendly site planning based on ecology concept, constructing of ecological production and management. In case study, detailed techniques from each planning aspects are shown in table 8. As a result of case study, detailed techniques about planning of energy and substance recycling system is accommodated most. On the other hand, environmentally-friendly site planning techniques based on ecological concept is used passively. And detailed techniques about constructing of ecological production and management are very various as each cases. Finally, in terms of analysis, this study shows us appliable planning when we develop domestic Ecological industrial parks.

• The Journal of Korean Medical History
• /
• v.36 no.2
• /
• pp.61-76
• /
• 2023

Objectives: This study was designed to introduce distinctive Do-In techniques among the many found in the book 'Euibangyoochi'. Methods: 'Do-In section' of Euibangyoochi was translated, and distinctive Do-In techniques were extracted from it. These techniques were categorized as 'using specific actions', 'using vocal sounds'. Results: The Do-In methods in the 'Do-In section' of Euibangyoochi were categorized. The first category includes Do-In methods that involve specific actions, such as 'Myung Chun Go', 'Go-chi Beob', 'Ak-go Beob', 'Gun-yok Beob', and 'An-ma Beob'. The second category is the Do-In technique using vocal sounds, known as 'Yuk Ja Gyeol'. Conclusion: The 'Do-In section' of Euibangyoochi contains numerous Do-In techniques recorded in various texts. Among them, techniques with specified names were extracted and categorized. While there are currently no studies on the actual effects of these techniques, it is hoped that future research can validate their efficacy.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.490-493
• /
• 2004

There is great difficulty in machine below 10 micrometers by conventional machining methods, such as micro-EDM. However, ultra micro machining using focused ion beam(FIB) is able to machine to 50 nanometers. Bie ＆ moulds techniques are better than one-to-one machining techniques in regards to production costs in the mass production of ultra size structures. Also, it is advantageous to machine die ＆ moulds to the 10 micrometers level by FIB technique rather than other techniques. It is difficult to machine the three dimensional machining, such as micro lens, using FIB system because of their machining characteristics. In this paper, three dimensional machining techniques were properly introduced, and also experiments showed effectiveness of their techniques.