• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.147-151
• /
• 2005

CAN(Controller Area Network) is a simple and efficient network system for real time control and measurement. As it is not only good at error detection but also strong in electromagnetic interference, CAN has been widely used all over the industries. Basically, CAN needs a master node in charge of sensor data collection, node scheduling for data transmission to a monitoring system and error detection. According to the number of mater nodes, the CAN system is classified into two type of master system. One is a single master system that has only one master node and the other is a multi-master system where any sensor node can become a master node depending on the system's conditions. While it has the advantage of its fault tolerance, the multi-master system will suffer form the overall performance degradation when a defect is found in the master node. It is because all sensor nodes pertaining to a defective master node lose their position. Moreover, it is difficult and expensive to implement. For a single master system, the whole system will be broken down when a problem happens to a single master. In this paper, a dynamic master system is presented that there are several sub-master nodes of which basic functions are those of other sensor nodes at ordinary times but dynamically changed to replace the failing master node. An effective scheduling algorithm is also proposed to choose an appropriate node among sub-master nodes, where each sub-master node has its precedence value. The performance of the dynamic master system is experimented and analyzed.

• The Korean Nurse
• /
• v.19 no.5 s.108
• /
• pp.50-53
• /
• 1980

A new patient classification system, SLC System was introduced. It has been implemented in the Friendship Village Extended Care Facility in St. Louis, Missouri, USA, and it has shown that the system not only simplified the job but also increased the job e

• Korean Institute of Interior Design Journal
• /
• v.18 no.5
• /
• pp.71-79
• /
• 2009

This research understands semantics-system in contemporary space design as a poetic form. It provides that the possibility of various interpretation of space and makes to escape from insipid formal logic of compulsion uniform meaning. In order to unfold this argument, poetic semantics system has to be revealed using conversion of articulation factors in text of space(semantics and syntax). First of all, after setting up the articulation system of space language, we have to understand the conversion of articulation factors that generate a new grammar breaking up the rule of old syntax. And the various expression of form in Contemporary Space design focuses on a poetic expression, that is, the abstraction system fused by space factors(conversion of articulation system). In this method of research to recognize the subject of space in architecture, the importance of interpretation has to be highlighted, as the importance of language is emphasized that intermediates between object and interpretation. The reason to recognize Contemporary space design as a text is that it is a gathering of symbol as a object of interpretation and a mediator. The important issue of this study is to research how and what to transmit by poetic semantics system in contemporary space design. It brings about a poetic problem what it intends to becomes(the problem of meaning operation) in a narrow sense and a interpretational problem what it intends to do(the problem of communication). When we define interpretation the technique of defining a text, it involves the premise of inevitableness of multiple understanding, or the possibility to Interpret variously. In the end the ambiguity of poetic language and the infinity of moaning process as the moaning expansion system in contemporary space design is the flexible measure to solve the self-criticism.

• Structural Engineering and Mechanics
• /
• v.61 no.5
• /
• pp.675-684
• /
• 2017

In this paper, a hybrid seismic response control (HSRC) system was developed to control bridge behavior caused by the seismic load. It was aimed at optimum vibration control, composed of a rubber bearing of passive type and MR-damper of semi-active type. Its mathematical modeling was driven and applied to a bridge model so as to prove its validity. The bridge model was built for the experiment, a two-span bridge of 8.3 meters in length with the HSRC system put up on it. Then, inflicting the EI Centro seismic load on it, shaking table tests were carried out to confirm the system's validity. The experiments were conducted under the basic structure state (without an MR-damper applied) first, and then under the state with an MR-damper applied. It was also done under the basic structure state with a reinforced rubber bearing applied, then the passive on/off state of the HSRC system, and finally the semi-active state where the control algorithm was applied to the system. From the experiments, it was observed that pounding rather increased when the MR-damper alone was applied, and also that the application of the HSRC system effectively prevented it from occurring. That is, the experiments showed that the system successfully mitigated structural behavior by 70% against the basic structure state, and, further, when control algorithm is applied for the operation of the MR-damper, relative displacement was found to be effectively mitigated by 80%. As a result, the HSRC system was proven to be effective in mitigating responses of the two-span bridge under seismic load.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.2
• /
• pp.66-74
• /
• 2008

Since modem embedded systems need to access, manipulate or store sensitive information, it requires being equipped with cryptographic file systems. However, cryptographic file systems result in poor performance so that they have not been widely adapted to embedded systems. Most cryptographic file systems degrade the performance unnecessarily because of system architecture. This paper proposes ISEA (Indexed and Separated Encryption Approach) that supports for encryption/decryption in system architecture and removes redundant performance loss. ISEA carries out encryption and decryption at different layers according to page cache layer. Encryption is carried out at lower layer than page cache layer while decryption at upper layer. ISEA stores the decrypted data in page cache so that it can be reused in followed I/O request without decryption. ISEA provides page-indexing which divides page cache into cipher blocks and manages it by a block. It decrypts pages partially so that it can eliminate unnecessary decryption. In synthesized experiment of read/write with various cache hit rates, it gives results suggesting that ISEA has improved the performance of encryption file system efficiently.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.396-399
• /
• 2004

This study was performed to develop necessary Visual Inspection System for the PSC Bridges precision safety diagnosis which to enhance the efficiency and accuracy of visual inspection by using mobile PC and adopted IT. This system was constructed to the automatic visual inspection map generating program and the Visual Inspection System using mobile PC that predicted high efficiency.

• Explosives and Blasting
• /
• v.15 no.2
• /
• pp.53-72
• /
• 1997

It is impossible to precat the behavior of ground soil and structure accurately during underground construction in urban area or excavation in soft ground area because of difference between the assumed design condition and the actual site condition. Therefore, it must be managed by measuring system and correct the difference by real data. Large scale under ground construction in urban area like a seoul subway project has needed for Intelligent Construction technique, a field of the Engineering Contractor. The automated measuring system is developed for the technique. It is described that the procedure and the method of measuring work with application of the automated measuring system.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.688-691
• /
• 1999

Recently, it is increased to adopt inverter system to household electrical appliances, especially in ai conditioner and refrigerator. Inverter system is adopted for improving the efficiency. But Inverter system makes acoustic noise caused by switching frequency. In household electrical appliace, it is important to reduce acoustic noise. And in some cases it is possible to magnify the acoustic noise caused by switching, by system which may have different transfer characteristic. In this paper, random PWM method was adopted in inverter refrigerator using 8 bit microprocesso. We found useful PWM frequency and adoptation method.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.193-195
• /
• 2007

It will be able to deliver quickly information it measures a weight the numerous vehicles at real-time for the managers. It does the Graphic LCD driver development for in Factory automation embeded system and introduces the plan and an embodiment of process shipping automation system.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.15-26
• /
• 2004

There is much dangerous machine in worksite. These make the rate of accidents increase. Specially, among them, dryness equipment work has the highest rate of accidents. Therefore, it has been managed by safety-health law. It is very important to make a special study of work using the dangerous machine. In press work, it is also important to develop safety system program to improve productivity and work safely In this reaserch. the safety mangement system is built for the work improvement of the Press. I will try new development method about dangerous machine.