• The KIPS Transactions:PartA
• /
• v.12A no.2 s.92
• /
• pp.171-180
• /
• 2005

In distributed systems data are replicated and stored at several nodes to increase the availability and overall performance. Here Quorum protocol doffing a certain set of replicas required for read/write operation exists for global concurrency control. One of the representative replication Protocols - the Tree Quorum protocol - has a drawback of rapidly growing number of replicas as the level increases, while the Grid protocol requires the same operation cost even without any failure. In this paper, thus, we propose a new replication protocol called hybrid protocol which capitalizes the merits of the existing protocols and solves the problems of them at the same time. The proposed hybrid protocol has very low operation cost in the absence of failure like the tree quorum protocol, and has relatively lower operation cost and higher availability than existing protocols when failure occurs by employing tree architecture as the overall organization while each level of the tree is organized as a row of a grid architecture. It is thus effective to be applied to survival storage system. We conduct cost and availability analysis of the proposed protocol through mathematical modeling, and response time and throughput are compared with those of the Tree Quorum protocol through computer simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1151-1160
• /
• 2016

In recent years, the energy storage systems such as LiB, NaS, RFB(Redox-Flow Battery), Super- capacitor, pumped hydro storage, flywheel, CAES(Compressed Air Energy Storage) and so on have received great attention as practical solutions for the power supply problems. They can be used for various purpose of peak shaving, load leveling and frequency regulation, according to the characteristics of each ESS(energy storage system). This paper will focus at 1 MWh RFB system, which is being developed through the original technology project of energy material. The output of ESS is mainly characterized by C-rate, which means that the total rated capacity of battery will be delivered in 1 hour. And it is a very important factor in the ESS operation scheduling. There can be several options according to the operation intervals 15, 30 and 60minutes. The operation scheduling is based on the optimization to minimize the daily electricity cost. This paper analyzes the cost-saving effects by the each operating time-interval in case that the RFB ESS is optimally scheduled for peak shaving and load leveling.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.4 s.16
• /
• pp.69-79
• /
• 2003

About 93$\%$ of domestic teal estate construction firms registered as the end of 2001 recorded net profits of only less than 500 million won(including firms in the red) for the term. As a result of having analyzed the ratios of sales costs and the structural ratios of sales costs for the past 10 years, it was found that there have been great changes in structural ratios of sales costs. Material costs and labor costs have gradually decreased, but outsourcing costs of processing have greatly increased. In order to find activity points which are fundamental to cost control, the methods of new activity based cost management have been pursued. The characteristics of real estate construction industry lie in the fact that contract prices (sales in) are fixed and amounts of profits differ depending on the use of costs. In order to create maximum profits from fixed contract prices, the new activity based cost management has been proposed. The control of operation budgets and management costs is designed to control their schedules and expenses in different respects. Operation budgets ate executed with specific activities and management costs are controlled as a form of material costs, labor costs, out sourcing costs and expenses which are details of expenditure. In order to execute them by using the methods of new activity based cost management, first of all, we have to analyze what activity drivers ale and how much added values such activities can create. It is considered as a method of cost management which is necessary far the survival management of real estate construction industry.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.1
• /
• pp.155-162
• /
• 2002

In this research, I finally came to a conclusion analyzing the connection among managing of each items in management expenses, the size of each complex and stories, and the term of using. (1) In the managing cost regarding to the management manner, although the managing cost of self-governing management is less imposed than the one of commission management, there is slight difference between those Costs. And it is more important to consider the effectiveness of management than to emphasize reduction of management cost. (2) The higher the stories, the higher the managing cost of elevator per the unit area. It Is caused by the fact that the father the distance of the elevator operating, the higher the electric charges. (3) The third of one of total management cost goes to pay the personnel expenses. So I found that the effective management of the expenses is available to reduce management cost. (4) The higher the stones, the lower the cost of personnel expenses including the cleaner cost. (5) The sum of costs assigned in repairment and management increases in proportion to the term of using. The costs assigned in special repairment and management are interacting to each other. (6) To reduce the management cost, we have to cut down the personnel in security guard that occupies one third of total management cost with application to the joint security system and operation of the self-governing guard. Through this process, it will be easy to accomplish the rationalization of contract with an outside order. Because the improvement of management service is not only the responsibility of owner but also the one of dwellers. And it Is imperative to realize the importance of cooperation and trust between the owner and dwellers. And the establishment of effective managing system which has convenience and rationality must be settled without delay.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.125-126
• /
• 2007

This paper presents a CHP Heat Exchange Mechanism considering Economic Load Dispatch with Dynamic Programming. It calculates CHP heat generation cost and Heat load pattern. Also It presents CHP optimal operation through appliance of Heat Exchange Mechanism and investigates CHP optimal operation effects about connected two regions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.38
• /
• pp.189-197
• /
• 1996

It is in general reported that construction cost in an underground storage facility is less than that of the same capacity and features in an aboveground facility. Since these costs have a derivative with respect to facility size and fridging unit, the cost of construction and fridging unit are sensitive to location of storage, items to store, and rock quality of storage site. In this paper, to analyse an economic investment point for the underground food storage relative to aboveground storage, we compared these two models which have equivalent annual cost with the total cost that consists of initial facility investment cost and annual operation cost. Based on comparison of the economic investment in the underground with aboveground storage. an economic initial investment cost has been suggested for storing the agricultural and fish products.

• Journal of applied mathematics & informatics
• /
• v.31 no.3_4
• /
• pp.425-441
• /
• 2013

In literature, several strong designated verifier signature (SDVS) schemes have been devised using elliptic curve bilinear pairing and map-topoint (MTP) hash function. The bilinear pairing requires a super-singular elliptic curve group having large number of elements and the relative computation cost of it is approximately two to three times higher than that of elliptic curve point multiplication, which indicates that bilinear pairing is an expensive operation. Moreover, the MTP function, which maps a user identity into an elliptic curve point, is more expensive than an elliptic curve scalar point multiplication. Hence, the SDVS schemes from bilinear pairing and MTP hash function are not efficient in real environments. Thus, a cost-efficient SDVS scheme using elliptic curve cryptography with pairingfree operation is proposed in this paper that instead of MTP hash function uses a general cryptographic hash function. The security analysis shows that our scheme is secure in the random oracle model with the hardness assumption of CDH problem. In addition, the formal security validation of the proposed scheme is done using AVISPA tool (Automated Validation of Internet Security Protocols and Applications) that demonstrated that our scheme is unforgeable against passive and active attacks. Our scheme also satisfies the different properties of an SDVS scheme including strongness, source hiding, non-transferability and unforgeability. The comparison of our scheme with others are given, which shows that it outperforms in terms of security, computation cost and bandwidth requirement.

• Journal of Biosystems Engineering
• /
• v.12 no.1
• /
• pp.31-38
• /
• 1987

In order to improve the traditional post harvest system in Korea, a model for mechanized rice drying and storage system was developed and introduced as the first part of the study(Park, 1986). As the second part of the study, capital requirement and cost of the model system was analyzed. Also, optimum size of the model system was estimated by comparing with the traditional harvest system. From the study, the following results can be concluded: 1. The capital requirement of the model system decreases as the model size increases. For example, a model system having 500 ton storage capacity requires 439,000 Won/ton. However it requires 313,200 Won/ton only, if the model size increases to 1000 ton. 2. Also, total cost of the model system decreases as the model size increases. For example, total costs of the model system having 500 ton and 1000 ton storage capacity are 101,208 Won/ton and 69,320 Won/ton, respectively. 3. The breakeven point (optimum size) of the model can be estimated around 630 ton storage capacity if the operation rate is assumed as 100%. However, the optimum size of the model is 710 ton, if the operation rate it assumed 80%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.1028-1034
• /
• 2003

The objectives of this paper are to study the effect of key parameters on the cycle performance and capacity and to estimate the cost of latent and sensible energy transportation systems. The overall conductance (UA) of each component, the ambient temperature and the absorber inlet temperature are considered the key parameters. It is concluded that COP of the solution transportation using an absorption system (STA) at ambient temperature is 10% higher than that of the conventional sensible system. It is also found that the cost of STA system can be reduced 7.5 times to that of sensible energy transportation for one year of operation with 10 km transportation distance.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.743-751
• /
• 2010

It requires an interim performance assessment for BTL business of the sewerage rehabilitation which continues from 2005 till now. Means, It is necessary to make an interim performance assessment and an analysis of an business effect of the sewerage rehabilitation BTL projects which still continues, and we presented an improvement method of the new sewerage rehabilitation project in future. This paper has conducted an analysis of the business effect for 3 local government BTL projects which are completed and under operation as of now in Jincheon-Gun, Cheongju-Si and Gangjin-Gun. As a method of business effect analysis, we conducted a business effect of the 3 places using the index set which we previously set for the business effect analysis. The index set in this research was sectionalized to an improvement effect of operating wastewater treatment plant, an benefit effect of the direct cost, an benefit effect of the indirect cost and an environment friendly effect. We, in this paper, conducted an business effect analysis for 3 sewerage rehabilitation BTL projects which are completed or under operation recently as a demonstration, however we judge that an business effect analysis shall be conducted in a stage that a significant time for operation has passed since the completion of the construction in order to induce an actual business effect of the sewerage rehabilitation BTL project.