• 문화기술의 융합
• /
• 제8권3호
• /
• pp.457-462
• /
• 2022

본 연구는 순환자원을 대량 활용한 지반안정재를 활용하여, 비교적 작은 하중이 작용하는 중·저층 건축물의 얕은 기초 보강공법에 적용한 사례에 대한 내용으로 우선하여 현장 최적배합비를 도출하고자 4가지 혼합비에 대한 실내배합시험을 실시하였으며, 도출된 최적배합비를 이용하여 현장에서 건축물 얕은기초로 적용하였다. 현장 적용방법은 원지반와 지반안정재를 교반한 혼합토를 현장에서 혼합하여 다짐을 실시하는 매우 단순한 공정을 이용하였다. 현장 적용 후 평판재하시험을 원지반 1곳, 개량지반 2곳에 실시하여 허용지지력을 확인하였다. 지지력 확인 결과 충분한 지지력을 발휘하는 것으로 나타나, 해당 건축물의 앝은기초로 활용이 가능한 것으로 확인되었다.

• 한국산업정보학회논문지
• /
• 제29권3호
• /
• pp.89-105
• /
• 2024

본 연구는 ESG 활동의 효과성을 마케팅 관점에서 접근하여, ESG 활동이 기업의 브랜드 가치에 미치는 영향을 실증적으로 살펴보는 데 목적이 있다. 본 연구는 2016년부터 2022년까지 코스피와 코스닥에 상장된 기업을 대상으로 실증 분석을 실시하였다. 본 연구의 실증 분석 결과를 보면, 첫 번째, ESG 활동 개별 분석에서 E(환경)와 G(지배구조)는 브랜드 가치에 유의한 정(+)의 영향을 미치는 것을 확인하였다. 두 번째, 환경 분야에서는 이해관계자 대응이 브랜드 가치와 유의한 정(+)의 관계가 나타났고 지배구조 분야에서는 이사회가 브랜드 가치와 유의한 정(+)의 관계가 있었다. 본 연구를 통해 ESG 활동이 브랜드 가치를 올리는 데 선행적으로 행해져야 할 중요한 활동임을 증명하는 논리적 근거를 제시할 수 있다. ESG 활동 중에서도 환경 분야의 이해관계자 대응 활동과 지배구조 분야의 이사회 관련 사항이 브랜드 가치를 올리는 데 중요한 역할을 하다는 것을 밝혀내었다. 또한 마케팅 분야에서도 ESG 활동의 중요성을 연구하는데 마중물 역할을 할 것으로 기대한다.

• 한국방사선학회논문지
• /
• 제7권3호
• /
• pp.227-232
• /
• 2013

엑스선 디지털 검출기의 내부 픽셀들은 조금씩 다른 감도와 오프셋 변동을 가지게 되어 불균일한 영상이 얻어진다. 이러한 문제를 해결하기 위해서 flat-field 보정 방법이 개발되었고, 이는 디지털 의료 영상 시스템의 전처리 과정에서 필수적으로 수행된다. 그럼에도 불구하고 여러 가지 이유로 균일하지 않은 영상이 획득되는 경우가 종종 발생한다. 본 연구에서는 디지털 의료 영상 장비에서 획득된 불균일한 영상에 flat-field 보정을 다시 적용시켜 화질이 개선되는 것을 확인하였다. 그리고 객관적인 화질의 평가를 위해 보정 전후의 NPS를 각각 산출하여 비교하였다. 주파수 영역에서 잡음의 변화를 분석한 결과 저주파수 성분의 잡음이 flat-field 보정 후에 크게 제거된 것을 확인할 수 있었다.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.43-57
• /
• 2003

This paper presents the air corridor planning strategy based on simulation with MUKLMO_3 (Micro-scale Urban Climate Model) to investigate the wind field and air corridor caused by the land-use change of the New Town Development Area in Pan-Gyo. In the first part, the most frequently observed wind field in the New Town Development Area was measured and used as an initial value to simulate a more realistic wind field and air corridor. Several experiments with different initial values of wind fields were carried out to investigate the wind field change affected by the New Town Development. The results show the features of the wind field of the neutral stability condition in the urban canopy layer with a high resolution near the ground. The wind speed is weakened at this level due to the New Town Development. It was found that the wind field and air corridor are influenced by the land-use change. After the development of the New Town, the speed of the wind field decreased and the main wind directions and air corridor changed. In this study, this model is found to be a useful tool for evaluating air corridor and change of wind field in speed and direction.

• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.743-750
• /
• 2003

The equivalent source method(ESM) is used for the calculation of the internal pressure field for an enclosure which can have arbitrary boundary conditions and nay include internal objects which scatter the sound field. The advantage of using ESM is that it requires relatively low computing cost and is easy to model the internal diffracting objects. Typical ESM modeling uses two groups of equivalent source positions. One group includes the first order images of the source inside the enclosure. The Positions of the other group are usually on a spherical surface some distance outside the enclosure. The normal velocity on the surfaces of the enclosure walls is evaluated at a larger number of positions than there are equivalent sources. The sum of the squared difference between this velocity and the expected is minimized by adjusting the strength of the equivalent sources. This study is on the optimal far field sources positions when using the equivalent source method. In general, the far field sources are evenly distributed on a surface of a virtual sphere which is centered at the enclosure with a sufficiently large radius. In this study. optimal far field source locations are searched using simulated annealing method for various radii of spheres where far field sources are located. Simulation results showed that optimally located sources with adequate distance away from the enclosure center gave better result than sources with even distribution even with a smaller number of far field sources.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.177-182
• /
• 2015

Many students can experience, such as for credit and social activities through field trips and participate in field trips. For on-site field training exercise participants currently in Gwangju University They take part in field trip 1, 2, 3 and 4 as the type.. Field Practice 1 type in summer and 2 in winter of 4-week period during vacation holidays with 3 credits, field trips 3 type of 8-week period during vacational holidays with 6 credits recognized for \400,000 in job training fee is also payable by the Leaders in INdustry-university Cooperation Agency. 4 types of job training are fourth grade (Architecture Grade 5) can be employed in conjunction for more than 15 weeks and admitted to the second semester of 15 credits by participating in job training. For most schools, but to pay a fee-job training at the University of Hanyang University, Kyungpook National University has a student assistance in the field training participating companies. This establishment does not have a clear idea of the legal entities responsible in the event of industrial accidents. Academic research is also nonexistent state for them. In this paper, we distinguish the personality for it via the existing labor precedents with respect to the legal responsibility of an industrial accident. This aims at putting the means to establish the role of the University of job training support.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.925-927
• /
• 2005

The study is about a finite field multiplying unit, which performs a calculation t-times as fast as the Mastrovito's multiplier architecture, suggesting and using the 2-times faster multiplier architecture. Former studies on finite field multiplication architecture includes the serial multiplication architecture, the array multiplication architecture, and the hybrid finite field multiplication architecture. Mastrovito's serial multiplication architecture has been regarded as the basic architecture for the finite field multiplication, and in order to exploit parallelism, as much resources were expensed to get as much speed in the finite field array multipliers. The array multiplication architecture has weakness in terms of area/performance ratio. In 1999, Parr has proposed the hybrid multipcliation architecture adopting benefits from both architectures. In the hybrid multiplication architecture, the main hardware frame is based on the Mastrovito's serial multiplication architecture with smaller 2-dimensional array multipliers as processing elements, so that its calculation speed is fairly fast costing intermediate resources. However, as the order of the finite field, complex integers instead of prime integers should be used, which means it cannot be used in the high-security applications. In this paper, we propose a different approach to devise a finite field multiplication architecture using Mastrovito's concepts.

• 대한산업공학회지
• /
• 제27권2호
• /
• pp.190-196
• /
• 2001

This study aims to develop three types of the visual fields: stationary field, eye field, and head field, which are classified depending upon the eye and head movements. A visual experiment taking target size, target color, and meridian into account was conducted, in which the L32 orthogonal array was employed. The results showed that target size and meridian were significant at ${\alpha}$=0.01 in all three visual fields. Contrary to expectation, target color was significant at ${\alpha}$=0.10 only in the head field. Furthermore, the differences in size of the head field depending upon four target colors were negligibly small. Three linear regression models were provided to generate visual fields which are appropriate for given visual task's characteristics. In addition, a simple method using adjusting factor was also proposed so that anyone without knowledge for human factors/ergonomics can easily generate and use them when designing or evaluating visual tasks. It is expected that the visual fields presented in this study can be easily used even by non-ergonomic experts in real situations due to their simplicity.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.1-5
• /
• 2019

The pulsed field magnetization of the short-circuited soldered double pancake coil made of stabilized commercial high-Tc superconductor (HTS) tape is experimentally studied. The evolution of the shielding current induced by the pulsed field and the trapped field after the pulsed magnetization was measured at 77 K. It is shown that the trapped field in the coil is close to the value reached in the field cooling process and reduces weakly at 5-fold increasing of pulsed field amplitude. The current relaxation at t~2 ms after the pulse is defined by the current sharing between the tape's copper coating and the $YBa_2Cu_3O_{7-d}$ layer. In the intermediate time scale (1 s < t < 100 s) the flux creep in HTS layer dominates. At t > 100 s the current's relaxation is defined by the resistance of soldered joint between tapes.

• Wind and Structures
• /
• 제28권4호
• /
• pp.239-253
• /
• 2019

Accurate numericalsimulation of wind field over complex terrain is an important prerequisite for wind resource assessment. In this study, numerical simulation of wind field over complex terrain was further carried out by taking the complex terrain around Siu Ho Wan station in Hong Kong as an example. By artificially expanding the original digital model data, Gambit and ICEM CFD software were used to create high-precision complex terrain model with high-quality meshing. The equilibrium atmospheric boundary layer simulation based on RANS turbulence model was carried out in a flat terrain domain, and the approximate inflow boundary conditions for the wind field simulation over complex terrain were established. Based on this, numerical simulations of wind field over complex terrain under different inflow wind directions were carried out. The numerical results were compared with the wind tunnel test and field measurement data for land and sea fetches. The results show that the numerical results are in good agreement with the wind tunnel data and the field measurement data which can verify the accuracy and reliability of the numerical simulation. The near ground wind field over complex terrain is complex and affected obviously by the terrain, and the wind field characteristics should be fully understood by numerical simulation when carrying out engineering application on it.