• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.839-844
• /
• 2003

The effect of water level on the free vibration of a partially water-filled two rectangular plates structure was investigated by experimental modal analysis and finite element analysis using ANSYS computer program. Modal parameters of two rectangular plates coupled with water were obtained by means of experiment and the FEM solutions were compared with the experimental solutions to verify the finite element model. As a result, the comparison between the experiment and FEM results showed excellent agreement. The transverse vibration modes, in-phase and out-of-phase, were observed alternately in the fluid-coupled system. The effect of water level and water gap size on the fluid-coupled natural frequency were investigated. It was found that the natural frequency of the partially water-filled two rectangular plates are not proportional to the water level, but depend on mode number of plates.

• 한국치위생학회지
• /
• 제15권5호
• /
• pp.831-839
• /
• 2015

Objectives: The objective of the study was to investigate the influencing factors of turnover intention in the clinical dental hygienists. Methods: A self-reported questionnaire was completed by 415 dental hygienists in Gyeonggi, Chungcheong, Jeolla, and Kyongsang province from October 1 to December 31, 2014. Data were analyzed using IBM SPSS statistics 19.0 with a significance level of 0.05. The study instruments included 9 questions of the general characteristics of the subjects, 7 questions of job related characteristics, 16 questions of job stress, 20 questions of job satisfaction, 10 questions of burnout, 15 questions of organizational commitment, 10 questions of happiness index, and 10 questions of turnover intention measured by Likert 5 point scale. Results: Turnover intention was significantly related with job stress, burnout, and organizational commitment. Conclusions: In order to reduce the turnover intention in the hospital workers, it is very important to manage the human resources through continuous development of the competence and performance activation program.

• 한국동물위생학회지
• /
• 제42권4호
• /
• pp.297-300
• /
• 2019

In countries with FMD vaccination, as in Korea, typical clinical signs do not appear, and even in FMD positive cases, it is difficult to isolate the FMDV or obtain whole genome sequence. To overcome this problem, more rapid and simple NGS system is required to control FMD in Korea. FMDV (O/Boeun/ SKR/2017) RNA was extracted and sequenced using Ion Torrent's bench-top sequencer with amplicon panel with optimized bioinformatics pipelines. The whole genome sequencing of raw data generated data of 1,839,864 (mean read length 283 bp) reads comprising a total of 521,641,058 (≥Q20 475,327,721). Compared with FMDV (GenBank accession No. MG983730), the FMDV sequences in this study showed 99.83% nucleotide identity. Further study is needed to identify these differences. In this study, fast and robust methods for benchtop next generation sequencing (NGS) system was developed for analysis of Foot-and-mouth disease virus (FMDV) whole genome sequences.

• 대한기계학회논문집B
• /
• 제31권10호
• /
• pp.832-839
• /
• 2007

The geometry and dimensions of an expansion chamber are decisive factors in thermal puffer plasma chamber designs. Because they together dominate the temperature and speed at which the cooling gas from the chamber flows back through a flow channel to the arcing zone for the successful interruption of fault currents. In this study, we calculated the flow and mass transfer driven by arc plasma, and investigated the effects of a flow guide installed inside a thermal puffer plasma chamber. It is found that the existing cold gas of the chamber mixes with hot gases entrained from the arcing zone and is subjected to compression due to pressure build-up in the chamber. The pressure build-up with the flow guide is larger than that without due to a vortex which rotates clockwise around the chamber center. By the reverse pressure gradient, the mixing gas of the chamber flows back out for cooling down the residual plasma near current zero. In the case with the flow guide, the temperature just before current zero is lower than that without, and the Cu concentration with high electrical conductivity is also less than that without the flow guide.

• Journal of Microbiology and Biotechnology
• /
• 제9권6호
• /
• pp.839-846
• /
• 1999

An extracellular chitinase-producing bacterial strain induced by colloidal chitin was isolated from sea sand and was identified to be a member of the genus Cytophaga. The chitinase was purified successively by 30-60% ammonium sulfate fractionation, and DEAE-Bio gel A column, Octyl-Sepharose CL-4B column, and DEAE-Bio gel A column chromatographies. The enzyme had a molecular mass of 59.75 kDa, and the amino terminal amino acid sequence was ATPNAPVISW MPTDXXLQNXS. The enzyme acted better on colloidal chitin as a substrate than on chitosan. For colloidal chitin and chitosan (Degree of Acetylation, 15-25%), $K_{cat}$ values were 0.60U/mg and 0.08U/mg, respectively. HPLC analysis of the enzymatic reaction products showed that the chitinase produced mostly N-acetyl-D-glucosarnine and di-N-acetylchitobiose. The optimum temperature and pH for the enzyme were $50^{\circ}C$ and 4.0, respectively. N-Bromosuccinimide and $Hg^{2+}$ inhibited the chitinase activity as much as 90%, and $Sb^{3+}$, diethylpyrocarbonate, and $Ag^{+}$ inhibited it by 50-70%.

• 대한전기학회논문지
• /
• 제37권12호
• /
• pp.839-846
• /
• 1988

전기기기의 와류분포를 해석하고자 항때 자기벡터포텐셜을 이용한 2차원적 해석법을 적용하면 해석영성내의 와류의 크기는 구할수 있지만 그 분포 양상은 알 수 없다. 이러한 문제점을 해결하기 위해 전류 벡터포텐셜을 도입하여 지배방정식을 유도하였으며 이에 유한요소법을 적용하여 2차원적 와류분포해석을 시도하였다. 그리도 시간술분항의 취급에는 시간영성가중계산법을 적용하였으며 이에 따른 알고리즘을 도출하였다. 또한 위에 방법을 해석해가 좌우하는 모델 및 와류에 의해 구동토오크가 발생하는 군상적산전력계 의 알루미늄 원판에 적용하여 해석한 결과 그 타당성 및 유용성을 입증할 수 있었다.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.839-846
• /
• 1996

Epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$by pulsed laser deposition for ferroelectric field effect transistor. Epitaxial $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures exhibited 70$\mu C/cm^2$ and 17 $\mu C/cm^2$at a positively and negatively poled states, respectively. On the other hand, epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/LaCoO_3$heterostructures show the remnant polarization states opposite to the $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures. This indicates that the interface between (La, Sr)$CoO_3$ (LSCO) and $Pb(Zr, Ti)O_3(PZT)$ layers affects the asymmetric polarization remanence through electrochemical nature. The resistivity of $LaCoO_3$ (LCO) layer was found to be dependent on an ambient oxygen, primarily the ambient oxygen pressure during deposition. The resistivity of the LCO layer varied in the range of 0.1-100 $\Omega$cm. It is suggested that, with an appropriate resistivity of the LCO layer, the LCO/PZT/LSCO heterostructure can be used as the ferroelectric field effect transistor.

• Molecules and Cells
• /
• 제42권12호
• /
• pp.836-839
• /
• 2019

A tumor is an abnormal mass of tissue that arises when cells divide more than they should or do not die when they should. The cellular decision regarding whether to undergo division or death is made at the restriction (R)-point. Consistent with this, an increasingly large body of evidence indicates that deregulation of the R-point decision-making machinery accompanies the formation of most tumors. Although the R-point decision is literally a matter of life and death for the cell, and thus critical for the health of the organism, it remains unclear how a cell chooses its own fate. Recent work demonstrated that the R-point constitutes a novel oncogene surveillance mechanism operated by R-point-associated complexes of which RUNX3 and BRD2 are the core factors (Rpa-RX3 complexes). Here, we show that not only RUNX3 and BRD2, but also other members of the RUNX and BRD families (RUNX1, RUNX2, BRD3, and BRD4), are involved in R-point regulation.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.530-534
• /
• 2006

RFID/USN은 u-Korea를 구현하는 핵심 인프라로서 무한한 성장 잠재력을 내포하고 있으며 향후 인터넷에 이어 산업 전반에 커다란 변혁을 가져올 수 있는 분야로 대두되고 있다. 우리나라의 경우 u-Korea 비전과 세계적인 RFID/USN 기술을 확보하여 세계 시장을 선점하고자 하는 IT839 정책에 따라 RFID/USN에 대한 관심도가 사회 전반적으로 증대되어 USN에 대한 연구가 활발히 이루어지고 있으며 앞으로 USN 인프라 구축이 완료됨에 따라 USN을 활용하기 위한 USN 어플리케이션들이 빠르게 증가할 것이다. USN 인프라 기반의 어플리케이션 개발을 보다 손쉽게 하기 위해 USN 미들웨어의 필요성이 대두되며 디렉토리 서비스는 USN 미들웨어를 구성하는 핵심 서비스 중의 하나이다. 그러나 USN 구성요소인 WSN의 특성 등을 고려할 때 USN 인프라에 적합한 디렉토리 서비스는 검색에 중점을 둔 기존의 디렉토리 서비스와 달리 갱신문제가 나타날 수 있으며 본 논문은 이를 극복할 수 있는 디렉토리 서비스의 설계 및 구현에 대해 논한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.831-839
• /
• 2009

An interlocking equipment of railway signalling systems is manufactured with electrical devices and electrical interlocking equipment has been substituted for existing interlock equipment(relay sequential logic type). But interlock conditions are still generated from rail diagram and used to make Interlock Table manually. In order to make EIS(Electrical Interlock System) operate, we should write interlock data which is made from interlock table. But, as the station is larger and more complicated, handwork may becomes a very tediou work and makes more mistakes. Therefore the development of CAD system for Interlocking System is very significant, if CAD can reduce the mistakes from handwork and help the configuring the interlocking system. In this paper, we first arrange some rules which can be used to extract route information automatically from rail diagram and interlocking rules. And then we propose "Search-And-Rollback" algorithm to extract route information and individual interlocking rules. The proposed algorithm is implemented and tested through the signal design process of the Hyundai-Steel private railway to carry melted pig iron from the blast furnace to the steel-making workshop. some cases. It shows that CAD for Interlocking system is very helpful in time saving aspect and system reliability.