• Journal of the Korean Geographical Society
• /
• v.49 no.1
• /
• pp.91-105
• /
• 2014

The objective of this study is to analyze the project performance and development process of the phase 1 project of GFEZ from 2004 to 2010. The phase 1 project from 2004 to 2010 is consist of eleven project zones. Among these zones, eight zones are currently underway and three zones have been completed. The performance of the phase 1 projects is no so much because it were stated later than planning with the difficulty of business developers selection. The major performances are development and supply of industrial & residential land, construction of road and railway, investment promotion of 102 companies, and creation of 20,971 new jobs. Most of the direct invested companies were located at Gwangyang and Yulchon Districts, and were mainly logistics and related service, iron and steel, machinery, shipbuilding, and fine chemicals. The main problems, however, are the limit of promotion of high-tech industries and large firms, low FDI reported rate, difficulty of superior business developers, delayed business progress of Hadong district. Therefore, efforts to solve these problems are required for the success of GFEZ.

• Journal of Technology Innovation
• /
• v.27 no.3
• /
• pp.53-82
• /
• 2019

This study empirically conduct structural equivalence analysis based on social network analysis in picking up on overall structural characteristics of technological knowledge exchange in a regional cluster. Previous conceptual studies so far have argued that performance differences among structurally equivalent groups exist. However, because little research has been done to empirically investigate this conceptual hypothesis, this study is conducted as complementary to fill this void. For analysis, we utilize two-mode network data consisted of 2,550 firms by investigating 53 technological knowledge exchange-related associations within Gumi national industrial cluster. The results show that some structurally equivalent groups can be defined appropriately and its role can be conditioned by firms' salient characteristics attached to each structural equivalent groups. In addition, it is presented through the present study that performance difference in structural equivalent groups can be distinct by some selected performance indicators. Finally, this study suggests the need to advance the study of performance differences in structurally equivalent groups in the future.

• Journal of the Korean Regional Science Association
• /
• v.6 no.1
• /
• pp.11-38
• /
• 1990

The purpose of this thesis is, first to present the spatial division of labor in Korea and its mechanism, and second, to elucidate the organic integral relation between local labor market and local community by studing the mechanism that the spatial division of labor is projected into the individual lacal labor marker, and reproduction of labor force process in this local labor market. According to this purpose, the theoretical frame of this analysis is done, the positive analysis is made and Kumi is choosed as its analysis case area. The main data is from 'Survey Report on Manufacturing Idustry Wage Conditions' published by Minimum Wage Council, Ministry of Labour and from the questionnaires and interview on textile industry and electric electronics industry firms in Kumi Export Industrial Estate. The following are the results of this study. 1. The mechanism of spatial division of labor in Korea, seen through the employment structure index, is accelerating the regional discrimination by fixing the regional hierarchisation between Seoul (or Seoul Metropolitan Area as expanded Seoul) and other areas. But it is also developing highly the regional employment structure at the level of technical division of labor, since the spatial division of labor in Korea is leaded by large firms and influenced by the policy for regional development. 2. Local labor market is formed in Kumi area and its delimitation is Kumi city. The employment structure of Kumi local labor market is occupying lower hierarchy division at management hierachical level and occupying upper hierarchy division at the level of technical division of labor, and brand plants of large firs are determinating and dominating this emplogment structure. These bdranch plants of large firs are forming more favorable and stabel labor marker than locally controlled ploants in Kumi local labor market. But the reproduction of labor force process in Kumi local labor market is not fully carried out and leaked into central city, therefore Kumi is now becoming an unstable local community, suffering from large movement of population. This is because Kumi local labor market is found not for itself, but by the state policy and externally controlled plants of large firms, and therefore no potentiality to control and to absorb the exterior influences is built in Kumi local labor market. 3. The case firms A, B have spatial division of labor between decision-making function and production function, and between upper management hierachical labor force and lower management hierachical labor force in internal labor market.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.93-101
• /
• 2005

The formation of slopes is unavoidable under the special circumstance of Korea where $7%$ of the whole area are composed of mountains and civil engineering projects such as road and site developments are increasing with industrial development and horizontal expansions of urban area. Stability of slopes is one of quite important issues under special meteorological characteristics that over two-thirds of annual average rainfall is concentrated in summer season and the localized torrential downpour is getting more frequent recently. As a result of these circumstances, partial slope failures by debris flow of the high water content soils occur frequently in cut soil slopes. In this case of debris flow slope failure, slope declination method is selected fur the stable recovery because it is impossible to recover entirely by existing recovery methods. Seeding or special grass planting methods are followed separately without exception. The method by which entire recover with bigger stability ratio would be possible and grass planting work would be done simultaneously is developed. For debris flow failure slopes, this study secured the safety of slopes by preventing the inflow of rainwater and scour using geosynthetics-reinforced embankment, and created nature-friendly slopes by planting trees on the slopes.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.187-199
• /
• 2016

In this study CALPUFF modeling was performed to predict a contribution of a separate single point pollutant source as well as of total point pollutant sources of major synthetic fiber manufacturers in Gumi national industrial complex to atmospheric trimethylamine concentration of the same area. In addition, a contribution of the separate single point pollution source to the atmospheric trimethylamine concentration of the same area was estimated relatively to the total point pollutant sources. As a result of the CALPUFF modeling, the maximum atmospheric concentration of trimethylamine in Gumi national industrial complex was appeared upon improving T company emission facility frequently in complex 3 in winter (January) and spring (April) while frequently in complex 1 in summer (July) and autumn (October). Besides, the predicted range of the maximum atmospheric concentration of trimethylamine in complex 1 was improved upon improving its emission facility. However, even though in complex 3 the upper bound of the predicted maximum atmospheric concentrations of trimethylamine was increased upon improving T company emission facility, the predicted value of their second upper bound below the upper bound was very similar to the upper bound of measured atmospheric trimethylamine concentrations in Gumi prior to improving its emission facility. Thus, the effect of improving T company emission facility was estimated huge in complex 1 while it was trivial in complex 3. These maximum concentrations of trimethylamine predicted to estimate the expected contribution of total point pollutant sources by CALPUFF modeling showed the similar values to those measured in the region of Gumi. Therefore, the expected contribution of total point pollutant sources to atmospheric trimethylamine concentration in the area of Gumi was validated.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.133-138
• /
• 2018

Safety management has become even more important because of the safety and environmental issues that have arisen since the 2000s. However, the safety study requires many empirical data, so there are many limitations. In the case of pipe safety, simulation programs exist, but it is difficult to get data about the pipe internal erosion of the pipe. In this study, the erosion rate of the pipe elbow was simulated using computational fluid dynamics (CFD). Also, the failure period of the pipe was calculated by the limit state function using erosion rate. In the case of CFD pipe, a sample which is actually operated in Yeosu industrial complex was used, and the geometry and mesh formation were rationalized in terms of typical fluid dynamics simulations. Using the Discrete Phase Model (DPM) and the corrosion model, the erosion rate ($3.09227mm{\cdot}yr^{-1}$) was obtained from CFD simulations. As a result of applying the erosion rate to the limit state function, we obtained the pipe failure period value, 14.2 years to trigger a leak and 28.2 years to trigger a burst. Through these processes, we concluded that pipe erosion is one of the major failure modes. In addition to the results, this study has significance for suggesting the methodology of the pipe safety study.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.1
• /
• pp.1-27
• /
• 2014

This paper aims at exploring the multi-scalar processes through which the Gumi Industrial Complex was developed in the late 1960s and the early 1970s. Existing studies, influenced by the "Developmental State Thesis", tend to see the industrialization processes of South Korea either by focusing on the socio-politico-economic processes at the national scale or in terms of the plan rationality of the national bureaucrats. This paper, however, denies this perspective on the basis of the strategic relational approach to the state and the multi-scalar perspective. In particular, it argues that the state actions for national industrialization have been the outcome of complex interactions, conflicts and negotiations among social forces, acting in and through the state, and at diverse geographical scales. This paper attempts to empirically prove this argument on the basis of a case study on the construction processes of Gumi Industrial Complex. The development of Gumi Industrial Complex cannot be solely explained in terms of either the plan rationality of the national bureaucrats or the political motivation related to the fact that Gumi was the hometown of President Park Jung-Hee. This paper argues that the development of Gumi Industrial Complex was heavily influenced by the role of the following actors; place-dependent local actors in Gumi and the multi-scalar agents, such as the Korean-Japanese businessmen and the national parliament members elected in the Gumi electoral district.

• Journal of the Korean association of regional geographers
• /
• v.22 no.2
• /
• pp.307-330
• /
• 2016

This article aims to explain how Gangnam, as a model and standard of compressed urbanization in South Korea, was created. Gangnam and Gangnam-style urbanization need attention not only because they contrast with Korea's urbanization in the past as well as urbanization in the West but also they provide an important model in contemporary Korea's politics, economy and culture. However, there are little studies of how Gangnam's peculiar urbanism was created. To fill this gap, this article will first capture Gangnam's peculiar urbanism as a material landscape and sociocultural lifestyle. Gangnam-style urbanism is (a) materially characterized by high-rise apartment complexes owned by the middle and upper class for dwelling and asset growth and (b) socio-culturally characterized by political conservatism, public indifference, competition over academic performance, appearance, and fashion, and nightlife. Then it will show Gangnam's archetype was created in a spatially and temporally compressed way in and through the spatial selectivity of Korean anti-communist authoritarian developmental state strategies: (1) anti-communism led to the diffusion and accommodation of the population through apartments in Gangnam in the context of its confrontation with North Korea and the fast-growing population of Seoul; (2) military authoritarianism excluded the low-income class and the urban poor from urban development; and (3) the developmental state adopted selective housing policy which treated construction companies and the middle class preferentially through exceptional zoning and price distortions, promoting the construction of apartment in Gangnam and its resultant uneven development.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.27-39
• /
• 2008

Landslides cause enormous economic losses and casualties. Korea has mountainous regions and heavy slopes in most parts of the land and has consistently built new roads and large-scale housing complexes according to its industrial and urban growth. As a result, the damage from landslides becomes greater every year. In summer, landslides frequently occur due to local torrential rains and storms. It is critical to predict the potential areas of landslides in advance and to take preventive measures to minimize consequences and to protect property and human life. The previous study on landslides mostly focused on identifying the causes of landslides in the areas where they occurred, and on analyzing landslide vulnerability around the areas without considering rainfall conditions. Thus there were not enough evaluations of the direct risk of landslides to human life. In this study, potentially risky areas for landslides were identified using the GIS data in order to evaluate direct risk on farmlands, roads, and artificial structures that were closely connected to human life. A map of landslide risk was made taking into account rainfall conditions, and a land use map was also drawn with satellite images and digital maps. Both maps were used to identify potentially risky areas for landslides.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.141-147
• /
• 2019

Recently, the biggest issue in the electricity industry is the increase in renewable energy, and various technologies are being developed to ensure the capacity of the power system. In addition, super-grids linking power systems are being pushed to utilize eco-friendly energy between countries and regions worldwide. The HVDC transmission technology is required to link the power network between regions with different characteristics of the power system such as frequency and voltage. Until now, Korea has applied HVDC transmission technology that connects mainland and Jeju Island with submarine cables. But, the HVDC transmission technology is still developing for long-distance high-capacity power transmission from power parks on the east coast to load-tight areas near the metropolitan area. Considering the high population density and mountainous domestic environment, it is pushing for commercialization of the design technology of the ${\pm}500kV$ Double Bipole with metallic return wire transmission line to transmit large-scale power of 8 GW using minimal right of ways. In this paper, the insulation characteristics were studied for the design of double-bipole transmission tower with metallic return wire, which is the first time in the world. And the air insulation characteristics resistant to the various overvoltage phenomena occurring on transmission lines were verified through a full-scale impulse voltage test.