• Korean Journal of Ichthyology
• /
• v.36 no.2
• /
• pp.174-181
• /
• 2024

This study examines the community characteristics of fish species collected by fyke net from the eastern coastal waters of Yeosu, Korea, during the period from 2020 to 2021. A total of 4,539 fish were sampled and classified into 43 species, 28 families, and 7 orders. The dominant species included Mugil cephalus (14.4%), Konosirus punctatus (10.9%), Lateolabrax japonicus (8.3%), Acanthopagrus schlegelii (7.9%), and Pennahia argentata (7.2%). The diversity index was highest in October (H'=2.888) and lowest in February (H'=2.075). Furthermore, the dominance index was highest in March (DI=0.524) and lowest in December (DI=0.178). Hierarchical cluster analysis (HCA) revealed that fish communities could be divided into three groups based on Bray-Curtis similarity. Group 1, consisting mainly of species collected from June to October, formed one cluster. Group 2, including winter spawning species such as Pseudopleuronectes yokohamae, Clupea pallasii, and Hexagrammos otakii, sampled from November to February, formed another cluster. Group 3, which included species such as Larimichthys polyactis, Amblychaeturichthys hexanema, and Sebastes inermis, formed a cluster collected from March to May. The eastern coast of Yeosu is considered a suitable habitat for fisheries resources, including highly economically valuable species, and it is also assumed to be an important spawning and nursery ground for many fish species.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.192-198
• /
• 2024

Purpose: In order to establish a safety management system led by an orderer in the construction industry, the orderer should be positioned at the peak of the construction industry safety management system and a system that can effectively support safety supervisors who can assist the orderer's role should be reflected. Method: This study collected and analyzed data on the status of safety management of construction business owners through prior research on safety management of construction business owners and a survey on the actual condition of those involved in the construction business. Results: The top priority is to improve the safety awareness and safety management capabilities of the orderer, and through these efforts, the orderer-led safety management system will be established when a national consensus on the responsibility of the orderer, such as the Serious Accident Punishment Act and the Occupational Safety and Health Act, is formed in the event of an accident such as a serious accident. Conclusion: In order to establish a safety management system led by an orderer in the construction industry, it contributes to disaster prevention by positioning the orderer at the peak of the construction safety management system and reflecting a system that can effectively support safety supervisors who can assist the orderer's role.

• Asia-Pacific Journal of Business
• /
• v.14 no.4
• /
• pp.67-85
• /
• 2023

Purpose - This study seeks to investigate the determinants of global sourcing intention in clothing sewing industry, in particular with its focus on women's knit wear production. Design/methodology/approach - This study collected a unique set of qualitative data through 31 in-depth interviews with fashion brands, promotion agencies, and sewing factories between July 2023 and October 2023. In addition, it analyzed the dataset using the MAXQDA to complement the research findings. Findings - We have two findings. First, the interviewees commonly mentioned the following factors as reasons for considering global sourcing: the human factors(aging of skilled technicians and labor shortages), the financial factors(gap in production unit prices at home and abroad), the relational factors(lack of novelty), and the physical factors(loss of production infrastructure and network), while the human factors(skilled workforce), the production factors(delivery date and product quality), and the relational factors(timely communication and mutual trust) as reasons for continuing domestic sourcing. Additional code analysis of interview also supports this finding. On the other hand, there was also a subtle difference between buyers(brands) and suppliers(promotion agencies and processing plants), and buyers consider the exact delivery date critical so that they could see trend-sensitive women's knit wear on time, and suppliers took production costs, labor costs, and labor shortages, which are financial factors, more seriously. Research implications or Originality - This study provides a richer and more balanced view of existing literature, which has generally tended to introduce global sourcing across the clothing industry despite the existence of various diversity within the industry. In addition, through qualitative research, we introduce that the sewing industry is carried out according to complex factors, and by revealing and categorizing the determinants of global sourcing, we supplement the existing research on the clothing sewing industry centered on survey. On a practical note, this study introduces that there is a difference in view of domestic sourcing and global sourcing between buyers(brands) and suppliers(promotion agencies and sewing factories), suggesting practical implications for revitalizing networks and deriving win-win cooperation network models among members in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.143-152
• /
• 2024

Due to COVID-19, domestic Duty-free shops have been severely impacted, and with the expansion of the untact market, the proportion of mobile shopping has increased. So far, mobile duty-free shop AR shopping is not active, and related research is scarce. Therefore, we aims to enhance Duty-free Shopping APPs with AR technology by researching the needs of foreign users. First, in the mobile duty-free shop app, the AR shopping interface must be in a prominent position to be open and easy to use. Second, there should be an explanation or help for location and function so that all users can easily recognize the AR shopping interface. Third, when wearing duty-free items in the AR shopping interface or adding them to the storage and shopping cart of interest, the interface must be simple and flexible, making it convenient to use and operate. Fourth, technical improvements must be made to prevent errors. We expect that the research will help develop AR shopping technology and domestic duty-free shop AR shopping technology and revitalize online and offline duty-free shops.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.297-305
• /
• 2024

As society changes rapidly, the role and status of general education has produced many changes, and accordingly, it is forming a close relationship with various social and cultural environments around the school. Especially, the direction in which general education should proceed and the development of regional-linked general education models have been actively studied at a time when the relationship between local regions and universities is getting strong. In this study, we have provided significant policy implications related to the development and application of future university-local cooperation models by developing a subject of community service activities based learning (CSAL) to get closer to community service and by analyzing actual educational cases and applying them to real community service organizations. In addition, we closely collaborated with local volunteer organizations operated by this local government system to connect with local community service, and through this, we reviewed actual cooperative classes with a local university and local volunteer organizations for the class curriculum, and developed a model to activate the university-local educational ecosystem.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.98-104
• /
• 2023

Effective and alternative strategies to control methicillin-resistant Staphylococcus aureus (MRSA) are consistently needed. Previous study presented that 7,10-epoxy-octadeca-7,9-dienoic acid (EODA) was produced from 7,10-dihydroxy-8(E)-octadecenoic acid through one-step heat treatment. Further studies confirmed that EODA was highly active against broad range of pathogenic bacteria including MRSA, promising development of a novel antibacterial agent to control MRSA. However, there are some practical huddles for industrialization of EODA, especially high cost for fine purification. To address this problem, this study was focused on determination of any changes in the antibacterial activities of EODA when used as a crude extract. As a result, any significant changes in the antibacterial activities of EODA was not detected and additional synergistic effect for commercial antibiotics on antibacterial activity was sustained as it was.

• Safety and Health at Work
• /
• v.14 no.4
• /
• pp.457-466
• /
• 2023

Background: During hot environment work tasks with whole-body enclosed anti-bioaerosol suit, the combined effect of heavy sweating and exhaled hot humid air may cause the N95 medical respirator to saturate with water/sweat (i.e., water-blocking). Methods: 32 young male subjects with different body mass indexes (BMI) in whole-body protection (N95 medical respirator + one-piece protective suit + head covering + protective face screen + gloves + shoe covers) were asked to simulate waste collecting from each isolated room in a seven-story building at 27-28℃, and the weight, inhalation resistance (R_f), and aerosol penetration of the respirator before worn and after water-blocking were analyzed. Results: All subjects reported water-blocking asphyxia of the N95 respirators within 36-67 min of the task. When water-blocking occurred, the R_f and 10-200 nm total aerosol penetration (P_t) of the respirators reached up to 1270-1810 Pa and 17.3-23.3%, respectively, which were 10 and 8 times of that before wearing. The most penetration particle size of the respirators increased from 49-65 nm before worn to 115-154 nm under water-blocking condition, and the corresponding maximum size-dependent aerosol penetration increased from 2.5-3.5% to 20-27%. With the increase of BMI, the water-blocking occurrence time firstly increased then reduced, while the R_f, P_t, and absorbed water all increased significantly. Conclusions: This study reveals respirator water-blocking and its serious negative impacts on respiratory protection. When performing moderate-to-high-load tasks with whole-body protection in a hot environment, it is recommended that respirator be replaced with a new one at least every hour to avoid water-blocking asphyxia.

• Journal of Korean Library and Information Science Society
• /
• v.55 no.1
• /
• pp.239-261
• /
• 2024

ISNI is a relay identifier that can integrate universal archival data and has the advantage of being flexibly applied to various fields compared to ORCID, which is limited to academic researchers, but in Korea, it is overwhelmingly issued to researchers and educators, and its purpose is gradually fading. In particular, overseas, ISNI issuance is active with the active participation of the publishing industry, but in Korea, there is no issuance through the publishing industry. This study was designed to expand the issuance of ISNIs to various fields including the Korean publishing industry. In order to achieve the research objectives, in-depth interviews were conducted with representatives of the existing ISNI-KOREA consortium organizations and potential consortium expansion organizations such as the publishing industry. As a result of the interviews, four policy implications were drawn as a way to revitalize ISNI: reorganizing its own system, strengthening governance, promotion and education, and system linkage. To address these policy implications, we proposed a mid- to long-term development plan centered on four policy goals and 12 key tasks. This study is expected to help the National Library of Korea, which operates the ISNI-KOREA consortium, develop policies related to ISNI activation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.169-189
• /
• 2024

In the current work, a series of three-dimensional finite element analyses have been carried out to understand the behaviour of pre-existing single piles and pile groups to adjacent Shield TBM tunnelling by considering various reinforcement conditions. The numerical modelling has analysed the effect of the pile cutting, ground reinforcement and pile cap reinforcement. The analyses concentrate on the ground settlements, the pile head settlements, the axial pile forces and the shear stress transfer mechanism at the pile-soil interface. In all cases of the pile tips supported by weathered rock, the distributions of shear stresses presented a similar trend. Also, when the pile tips were cut, tensile forces or compressive forces were induced on the piles depending on the relative positions of the piles. Furthermore, when the pile tips are supported by weathered rock, approximately 70% of the load is supported by surface friction, and only the remaining 30% is supported by the pile tip. Furthermore the final settlement of the piles without reinforcement showed approximately 70% more settlement than the piles for which ground reinforcement is considered. It has been found that the ground settlements and the pile settlements are heavily affected by the pile cutting and reinforcement conditions. The behaviour of the single pile and group piles, depending on the pile cutting, conditions of ground and pile cap reinforcement, has been extensively examined and analysed by considering the key features in great details.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.361-367
• /
• 2024

Ultrasound in the air is widely used in industry as a measurement technique to prevent abnormalities in the machinery. Recently, the use of airborne ultrasound imaging techniques, which can find the location of abnormalities using an array transducers, is increasing. A beamforming method that uses the phase difference for each sensor is used to visualize the location of the ultrasonic sound source. We exploit a random sparse ultrasonic array and obtain beamforming power distribution on the source in a certain distance away from the array. Conventional beamforming methods inevitably have limited spatial resolution depending on the number of sensors used and the aperture size. A high-resolution ultrasound imaging technique was implemented by applying functional beamforming as a method to overcome the geometric constraints of the array. The functional beamforming method can be expressed as a generalized beam forming method mathematically, and has the advantage of being able to obtain high-resolution imaging by reducing main-lobe width and side lobes. As a result of observation through computer simulation, it was verified that the resolution of the ultrasonic source in the air was successfully increased by functional beamforming using the ultrasonic sparse array.