• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4027-4035
• /
• 1996

Accuracy of gas flow measurements using sonic nozzle and factors which influence on the discharge coefficients of sonic nozzle are investigated with high pressure gas flow standard measurement system. The gas flow measurement system comprises two compressors, storage tank, temperature control loop, sonic nozzle test section, weighing tank, gyroscopic scale and data acquisition system. The experiments are performed at various nozzle throat diameter and inlet pressure. Overall uncertainty of discharge coefficients is estimated to less than .+-.0.2% and most of experimental data fall into this range. Dependence of discharge coefficients on the Reynolds number is good agreement with those suggested in ISO document. The influence of swirl on the discharge coefficients becomes greater as the nozzle throat diameter is enlarged. The discharge coefficient of conical nozzle shows about 4.5% lower discharge coefficients than those of toroidal nozzle, but variation trend with Reynolds number is very similar each other and reproducibility of data is very good.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.396-408
• /
• 2014

In this study, uncertainty analysis based on ITTC(International Towing Tank Conference) Recommended Procedures is carried out in the towing-tank experiment for motion responses and added resistance. The experiment was conducted for KVLCC2 model in head sea condition. The heave, pitch and added resistance were measured in different wave conditions, and the measurement was repeated up to maximum 15 times in each wave condition in order to observe the uncertainty of measured data. The uncertainty analysis was carried out by adopting the ISO-GUM(International Organization for Standardization, Guide to the Expression of Uncertainty in Measurements) method recommended by ITTC. This paper describes the details about the analysis method, uncertainty and the measured uncertainty for each source. The uncertainty analysis results are summarized as a tabular form. To validate the accuracy of the present measurement, the experimental results are compared with the results of numerical computation and other experiment. From the present uncertainty analysis, the main sources of uncertainty are identified, which can be very useful to improve the accuracy for added resistance experiment.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.56-63
• /
• 1999

47.7m급 쌍동선의 1/21.5 축척 모형선으로 예인수조에서 저항 및 내항성능 시험을 수행하였다. 저항 시험은 선미트림탭을 부착하여 트림탭각의 변화에 따른 트림 및 저항변화를 조사하여 트림 탭이 없는 경우와 비교하고 그 영향을 조사하였다. 해상상태 3,4 및 5에서 3가지 실선속력에 대해서 상하 및 종운동을 계측하였으며 갑판위 5점에서 수직가속도도 계측하였다. 측정한 가속도 값은 ISO 2631/3의 규정과 비교하여 설계선형의 우수함을 보였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.17-20
• /
• 2011

The International Association of Classification Societies (IACS) had developed the Common Structural Rules (CSR) for bulk carriers as per the needs noted above. ISO and IMO GBS (Goal-Based Standards) are now being developed in this regard. This study has been prepared to verity the strength of forward cargo hold of 82,000 DWT class bulk carriers. A cargo hold/tank 3-D FE model was established to assess the structural adequacy of the primary structural members with the loading conditions. Full breadth model was established for the analysis considering asymmetric nature of structural layout and loading conditions. To summarize this result of structural assessment based on IACS CRS for bulk carrier, it is benefit to design this kind of bulk carriers and to study the strength assessment for the similar type of bulk carriers.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.20-26
• /
• 2011

This paper is to investigate noise source for reciprocating type air compressors. The reciprocating type air compressors are widely used in the small and medium sized enterprise and many employees are affected and irritated by their noise during working. The investigation and analysis of the noise source were made according to the ISO 1680/1 and MIL-STD 7410-1 and noise evaluation of each part of compressors was made. Noise emitted from the intake and exhaust valve and the air receiver tank were dominant compared with those from other parts of compressor. Noise from the motor and the revolution of crank mechanism was negligible relatively with the noise sources as mentioned above.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1143-1148
• /
• 2010

We investigated the separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction comprising four kinds of NHC [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compound (BAC) [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN) mixture with ten structural isomers (DMNs; regarded as one component)], biphenyl (Bp) and phenyl ether (Pe) by liquid membrane permeation (LMP). A batch-stirred tank was used as the permeation unit. An aqueous solution of saponin and n-hexane were used as the liquid membrane and the outer oil phase, respectively. Yield and selectivity of individual NHC was much larger than that of BAC, Bp and Pe. Increasing the initial mass fraction of the saponin to the membrane solution ($C_{sap,0}$) and the initial volume fraction of O/W emulsion to total liquid in a stirred tank (${\phi}_{OW,0}$) resulted in deteriorating the yield of individual NHC, but increasing the stirring speed (N) resulted in improving the yield of each NHC. With increasing $C_{sap,0}$, the selectivity of each NHC based on DMNs increased. Increasing ${\phi}_{OW,0}$ and N resulted in decreasing the selectivity of individual NHC based on DMNs. At an experimental condition fixed, the sequence of the yield and selectivity in reference to DMNs for each NHC was Q > Qu = iQ > In. Furthermore, we compared LPM method with methanol extraction method in view of the separation efficiency (yield, selectivity) of NHC.

• 공업화학
• /
• 제21권2호
• /
• pp.238-241
• /
• 2010

콜타르 유분(유출온도범위: $240{\sim}265^{\circ}C$)으로부터 추출-증류의 조합에 의해 회수한 54.3 wt% 인돌 유출액(유출온도범위 $250{\sim}255^{\circ}C$)을 원료로 사용하여 용액 결정화 조작을 행해 인돌의 고순도 정제를 검토했다. 원료 유출액은 8성분(quinoline, iso-quinoline, indole, quinaldine, 1-methylnaphthalene, 2-methylnaphthalene, biphenyl, phenyl ether)으로 구성되어 있다. 결정화 조작의 용매로서는 노말헥산을, 냉매로서는 메탄올 수용액(50 : 50 vol%)을 각각 사용하였으며, 결정화 장치로서는 재킷이 부착된 pyrex제 유리 회분 교반기를 사용했다. 결정화 온도와 용매/원료의 초기 체적비의 증가는 인돌의 순도를 향상시켰으나, 역으로 수율을 저하시켰다. 석출된 결정의 세정조작 없이, 노말헥산을 용매로 사용한 용액 결정화 조작에 의해 고순도(99.3 wt%)의 인돌을 고수율(50%)로 회수할 수 있었다.

• Fisheries and Aquatic Sciences
• /
• 제22권4호
• /
• pp.8.1-8.9
• /
• 2019

A 12-week feeding trial was designed to evaluate the effect of total replacement of fish oil (FO) with terrestrial alternative oils on growth, feed utilization, body composition, hematological parameters, and fillet fatty acid profile of mandarin fish juveniles. Four iso-nitrogenous (56% crude protein) and iso-lipidic (13% crude lipid) practical diets were formulated. A control diet contained 6% FO and three other experimental diets were prepared by replacing FO with linseed oil, soybean oil, and lard (designed as FO, LO, SO, and lard, respectively). Each diet was randomly allocated to triplicate groups of 25 fish ($1.8{\pm}0.03g/fish$) in a circular tank. Complete replacement of FO by three tested alternative oils had no remarkable impact on growth performance, feed utilization efficiency, and morphological and hematological parameters of juvenile mandarin fish. However, daily feed intake was found to be significantly higher for fish fed the SO diet compared with those fed the FO and LO diets. Fish fed LO and SO diets exhibited significantly higher levels of the whole body lipid compared to fish fed diet containing FO. Fillet fatty acid composition reflected dietary fatty acid profile. The highest level of ${\alpha}$-linolenic acid, linoleic acid, and oleic acid was observed in fish fillet fed LO, SO, and lard, respectively. Although the eicosapentaenoic acid level of fish fillet fed diet FO was higher than other treatments, no significant difference was found in docosahexaenoic acid content among all dietary groups. The results of the present study clearly demonstrate that the complete replacement of FO in mandarin fish diets is achievable. These findings are useful in dietary formulation to reduce feed costs without compromising mandarin fish growth.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.418-421
• /
• 2003

Surfactant enhanced in-situ soil flushing was peformed to remediate the soil and groundwater at an oil contaminated site, and the effluent solution was treated by the chemical treatment process including DAF(Dissolved Air Flotation). A section from the contaminated site(4.5m$\times$4.5m$\times$6.0m) was selected for the research, which was composed of heterogeneous sandy and silt-sandy soils with average Hydraulic conductivity of 2.0$\times$10$^{-4}$ cm/sec. Two percent of sorbitan monooleate(POE 20) and 0.07% of iso-prophyl alcohol were mixed for the surfactant solution and 3 pore volumes of surfactant solution were injected to remove oil from the contaminant section. Four injection wells and two extraction wells were built in the section to flush surfactant solution. Water samples taken from extraction wells and the storage tank were analyzed by GC(gas-chromatography) for TPH concentration with different time. Five pore volumes of solution were extracted while TPH concentration in soil and groundwater at the section were below the Waste Water Discharge Limit(WWDL). Total 18.5kg of oil (TPH) was removed from the section. The concentration of heavy metals in the effluent solution also increased with the increase of TPH concentration, suggesting that the surfactant enhanced in-situ flushing be available to remove not only oil but heavy metals from contaminated sites. Results suggest that in-situ soil flushing and chemical treatment process including DAF could be a successful process to remediate contaminated sites distributed in Korea.

• 공업화학
• /
• 제25권2호
• /
• pp.142-146
• /
• 2014

9성분계 모델 콜타르 유분 중에 함유된 질소고리화합물(NHC)의 분리를 분배평형에 의해 검토했다. 원료로서는 NHC group (NHCs; quinoline (Q), iso-quinoline (iQ), indole (In), quinaldine(Qu)), 2환 방향족 화합물 group (BACs; 1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN)), biphenyl (Bp)과 phenyl ether (Pe)로 제조한 모델 콜타르 유분을, 용매로서는 메탄올 수용액을 각각 사용했다. 액-액 접촉 장치로서는 회분 교반기를 각각 사용했다. 평형조작 온도가 상승함에 따라 NHCs의 분배계수는 증가했으나, 역으로 BACs를 기준한 NHCs의 선택도는 감소했다. 초기 물/용매의 체적비가 감소함에 따라 BACs를 기준한 NHCs의 선택도는 급격히 감소했으나, NHCs의 분배계수는 증가했다. 일정 조건하에서, 각 group별 분배계수와 BACs를 선택도의 순서는 NHCs > Bp > BACs > Pe와 NHCs > Bp > Pe를 각각 나타냈다. 또한 전체 성분에 대한 분배계수의 순서는 In > iQ = Q > Qu > Bp > 1MN = 2MN > Pe > DMN을 나타냈다. 메탄올 추출에 의해 얻어진 NHCs의 최대 수율과 BACs를 기준한 NHCs의 최대 선택도는 각각 94%, 23이었다. 본 연구를 통해 얻어진 실험적 결과를 이용하여 콜타르 중에 함유된 NHCs의 회수공정을 검토했다.