• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.178-179
• /
• 2000

최근 들어 인체에 무해하고 대기 중에서 화학반응을 일으키지 않는 추적기체를 이용한 확산실험을 통해 기존의 대기오염 확산모델 등에 대한 평가 및 개선이 많이 이루어지고 있으며, 특정 지형을 대상으로 한 확산실험도 종종 이루어지고 있다. 도시지역에서의 오염물질의 이동과 확산은 오염물질의 농도뿐만 아니라 인근 도시에까지 영향을 미치게 되므로 매우 중요한 과정이다. (중략)

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.5
• /
• pp.383-390
• /
• 2008

The SCR in Static Transfer Switch (STS) is used for reliability improvement of important load's power supply in industry field. However an average of 2% fault in thyristor(SCR) occurs, so that the attached mechanical switch is paralleled with SCR's both end points and SCR operates only during the $12{\sim}208$[mS] before operation of the mechanical switch. Also, an ISC (Ideal State Conditioning Interlock Device) - STS system that two power supply paths may not be thrown at the same time is developed to remove the overlap section perfectly when a short or earth fault is generated in one system. This method has reduced the fault rate remarkably through the reduction of SCR's fatigue degree by using SCR in conversion operation corresponding to 0.89 times a year. Also, in case of fault generations, it does not affect to supply power to the load, therefore it contributes to the promotion of reliability in the power supply.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1229-1235
• /
• 2014

At the LPG vehicle air intake system, most of dust particles in the air cleaner are removed. However very small particles are not removed and accumulated. The accumulation of carbon in air intake system is going to affect the idle speed control and sensor signal. It also causes engine chattering and transmission troubles of automatic transmission. This is study about cleaning up intake system using cleaning chemical. We can clean up the intake system by spraying cleaning liquid onto intake device when the engine is idling after intake hose is removed from warmed up vehicle. We can obtain the following experimental results by cleaning up ISC, surge tank, intake manifold, intake valves and combustion chamber. According to this results, the stroll valve works correctly and power rate of engine is up to the standard, it is smoothy to control the idling speed when a vehicle pulls up. After cleaning up CO grow down about 0.15%, HC does about 20~100 ppm.

• Journal of Information Science Theory and Practice
• /
• v.8 no.3
• /
• pp.64-76
• /
• 2020

Scientometrics and social network analysis (SNA) measures were used to analyze the international scientific collaboration (ISC) of All India Institute of Medical Sciences (AIIMS) for a period of 10 years (2009-2018). The dataset consists of 19,622 records retrieved from the Scopus database. The mean degree of collaboration 0.95 implied that researchers of AIIMS tend to collaborate domestically (80.29%) and internationally (14.67%). The data exhibits a hyper authorship pattern, and a medium-size research team consists of 4 to 10 authors who contributed a maximum of 62.08% (12,182) publications. 71.97% of research findings are scattered in journal articles. The most preferred journals published 58.55% of medical literature. An undirected collaboration network is constructed in Pajek to study the ISC of AIIMS during the period 2009-2018 which consists of 179 vertices (Vn) and 11,938 edges. The degree centrality (Dc) identified that the United States of America (Dc - 54; CC - 0.99) and United Kingdom (Dc - 41; 0.98) are the most collaborative countries in the whole network as well as the most influential countries. The Louvain community detection method is used to detect influential research groups of AIIMS. The temporal evolution of ISC of AIIMS studied through scientometrics and SNA measures shed light on the structure and properties of ISC networks of AIIMS. It revealed that AIIMS, India has taken keen steps to enrich the quality of research by extending and encouraging the collaboration between institutions and industries at the international level.

• The Korean Journal of Franchise Management
• /
• v.2 no.2
• /
• pp.84-94
• /
• 2011

Domestic franchise industry is growing rapidly as a promising business in 21st century and also ordinary people business. Domestic franchise headquarters and franchisees have increased exponentially. However, because of tough competition in the industry, headquarters' lack o fawareness of recruiting and managing franchisees, and reckless expansion strategy for the structural problem of profit structure and lack of experts, systematic management and support system are not going well. For these reasons, the need of franchisee management system is growing up in this industry. Domestic franchise industry is focused on appearance, the volume, while absence and lowness of internal management systems are making stores shut down and conflicts proving necessity of management system. In this study, we find and study the way to compensate these problems and systematize by cooperating within surance companies to manage franchisees, and eventually to be able to set up and use new systems including franchise management system, initial services, on goin gservices, lega lservices, tax services, labor services, and financial analysis and planning services.

• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.32-40
• /
• 2012

Efficient Global Optimization (EGO) method is a global optimization technique which can select the next sample point automatically by infill sampling criteria (ISC) and search for the global minimum with less samples than what the conventional global optimization method needs. ISC function consists of the predictor and mean square error (MSE) provided from the kriging model which is a stochastic metamodel. Also the constrained EGO method can minimize the objective function dealing with the constraints under EGO concept. In this study the constrained EGO method applied to the RAE2822 airfoil shape design formulated with the constraint. But the noisy CFD data caused the kriging model to fail to depict the true function. The distorted kriging model would make the EGO deviate from the correct search. This distortion of kriging model can be handled with the interpolation(p=free) kriging model. With the interpolation(p=free) kriging model, however, the search of EGO solution was stalled in the narrow feasible region without the chance to update the objective and constraint functions. Then the accuracy of EGO solution was not good enough. So the three-step search method was proposed to obtain the accurate global minimum as well as prevent from the distortion of kriging model for the noisy constrained CFD problem.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.2
• /
• pp.124-128
• /
• 2011

Ferredoxin is a typical iron-sulfur protein that is ubiquitous in biological redox systems. This study investigates the in vitro assembly of a [$Fe_2S_2$] cluster in the ferredoxin from Acidithiobacillus ferrooxidans in the presence of three scaffold proteins: IscA, IscS, and IscU. The spectra and MALDI-TOF MS results for the reconstituted ferredoxin confirm that the iron-sulfur cluster was correctly assembled in the protein. The inactivation of cysteine desulfurase by L-allylglycine completely blocked any [$Fe_2S_2$] cluster assembly in the ferredoxin in E. coli, confirming that cysteine desulfurase is an essential component for iron-sulfur cluster assembly. The present results also provide strong evidence that [$Fe_2S_2$] cluster assembly in ferredoxin follows the AUS pathway.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.309-314
• /
• 2010

In this paper, an intelligent security camera over internet is proposed. Among ISC methods, watersheds based methods produce a good performance in segmentation accuracy. But traditional watershed transform has been suffered from over-segmentation due to small local minima included in gradient image that is input to the watershed transform. And a zone face candidates of detection using skin-color model. last step, face to check at face of candidate location using SVM method. It is extract of wavelet transform coefficient to the zone face candidated. Therefore, it is likely that it is applicable to read world problem, such as object tracking, surveillance, and human computer interface application etc.

• Industrial Engineering and Management Systems
• /
• v.14 no.2
• /
• pp.129-158
• /
• 2015

It is necessary for retailers to determine the optimal ordering policy of products considering supply disruptions due to a natural disaster and a production process failure as quality and machine breakdowns. Under the situation, a dualsourcing supply chain (DSSC) is one of effective SC for retailers to order products reliably. This paper proposes the optimal ordering policy of a product in a DSSC with a retailer and two manufacturers. Two manufacturers may face supply disruptions due to a natural disater and a production process failure after they received the retailer's order of products. Here, two scenarios of demand information of products are assumed: (i) the demand distribution is known (ii) mean and variance of the demand are known. Under above situations, two types of DSSC are discussed. Under a decentralized DSSC (DSC), a retailer determines the optimal ordering policy to maximize his/her total expected profit. Under the integrated DSSC (ISC), the optimal ordering policy is determined to maximize the whole system's total expected profit. Numerical analysis investigates how demand information and supply disruptions affect the optimal decisions under DSC and ISC. Besides, profitability of supply chain coordination adjusting the wholesale price is evaluated to encourage the optimal decision under ISC.

• Journal of Korea Trade
• /
• v.27 no.1
• /
• pp.19-41
• /
• 2023

Purpose - Conventional supply chains (SCs) must identify facilitating roles, such as port or terminal operators, shipping companies, and freight forwarders in executing the various logistical activities that support the organizational strategies of shippers. Meanwhile, supply chain collaborative practices can engender a willingness to share relevant and mutually helpful information. To this end, this study seeks to identify the impact of supply chain integration (SCI) on information sharing (IS) and the operational performance (OP) of Korea's container-shipping industry from the perspective of social capital. Design/methodology - We established the research model for this study based on previous studies. In administering the survey, we obtained 149 valid responses from employees working in liner-shipping companies and freight forwarders in Korea. With the collected questionnaires, the study's hypotheses were tested using SPSS 26.0 and AMOS 26.0 Findings - The results indicate the existence of a mediated relationship where the impact of SCI on OP is mediated by IS. The effect of external integration (EI) on OP is fully mediated by information quality (IQ) and information-sharing content (ISC). Furthermore, EI, IQ and ISC partially mediate the relationship between internal integration (II) and OP. Originality/value - This study expands SCI contexts, where ISC and IQ respectively serve as bridges between EI and OP which has crucial implications for container-shipping companies in terms of improving their performance.