• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.22-35
• /
• 1999

The block assembly process takes more than half of the total shipbuilding processes. Therefore, it is very important to have a practically useful block assembly process planning system which can build plans of maximum efficiency with minimum man-hours required. However, the process plans are often not readily executable in the assembly shops due to severe imbalance of workloads. This problem arises because the process planning is done on block by block basis in current practice without paying any attention to the load distribution among the assembly shops. this paper presents the development of an automated hull block assembly process planning system which results in the most effective use of production resources and also produces plans that enable efficient time management. If the load balance of assembly shops is to be considered at the time of process planning, the task becomes complicated because of the increased computational complexity. To solve this problem, a new approach is adopted in this research in which the load balancing function and process planning function are iterated alternately providing to each other contexts for subsequent improvement. The result of case study with the data supplied from the shipyard shows that the system developed in this research is very effective and useful.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.77-84
• /
• 2018

Biomimicry architecture has been highlighted in recent years for the innovative ideas from the nature have provided main developments in many areas. The related studies in Korean architecture is entering the first step and are needed close attentions for its vitalizations. This study starts with the acknowledgement of necessity to establish the architectural application process. First of all, it is named as a 'Passive Cycle' if a problem-solving or a project has been through the analysis of process complexity and biomimicry application process in other areas. Then, the basic frame is structured as a 'Process-Cooperation,' which integrates process complexation with process circulation. The cooperative relationship starts from the beginning of the design with not only professionalists related with architecture but also ones in various areas when it is issued a difficult problem or high environmental performance not found in common architectural design processes. To make the architectural application good progress, the characteristics of bio-mimetic architectural applications are categorized as three areas; the expected effect, the application level, and application method. As a result, the organic complexity should be prioritized to have bio-mimetic application effectively while accessing the principles. Therefore, the process for the architectural application of biomimicry is suggested as 'Organic Cycle-Cooperation.'

• Journal of Korean Society for Quality Management
• /
• v.50 no.1
• /
• pp.35-42
• /
• 2022

Purpose: The purpose of this study is to examine the characteristics and problems of existing research through various literature investigations on the existing R&D process. Implications are identified through the investigation of existing studies and the characteristics of the digital transformation era are analyzed. We research and propose a new R&D process suitable for the new era of digital transformation. Methods: The research method investigates various literature precedent studies on the existing R&D process and the methods used by companies. Research new R&D processes that reflect the characteristics of the digital transformation era and develop new related models. Results: In the era of digital transformation, the parallel R&D process is being reorganized to respond quickly to the demands of rapid market changes. In order to respond quickly to various customers, the R&D process can respond flexibly in a parallel structure. Conclusion: Along with the development of the R&D process, additional research on indicators and evaluation models that can evaluate them fairly and flexibly is needed. Further research is needed to determine whether the R&D process suitable for the digital transformation era is operating properly.

• Journal of Korean Society for Quality Management
• /
• v.16 no.1
• /
• pp.15-22
• /
• 1988

This paper analysis the process capability by applying experiment design to control alcohol in soluble matter mixing process of laundry soap. The results are summarized as follows: (1) Alcohol insoluble matter shows the tendency of increasing according to the mixing temperature (A) and beating velocity (B). (2) The most suitable working condition of the mixing process is $A_2B_2$, and 95% confidence limit of alcohol insoluble matter is $22.06{\pm}0.77%$. (3) The process capability index ($C_p$) of the mixing process is improved from 0.64 to 1.68.

• Communications for Statistical Applications and Methods
• /
• v.18 no.2
• /
• pp.229-236
• /
• 2011

A continuous time stochastic volatility model for financial assets suggested by Barndorff-Nielsen and Shephard (2001) is considered, where the volatility process is modelled as an Ornstein-Uhlenbeck type process driven by a general L$\'{e}$vy process and the price process is then obtained by using an independent Brownian motion as the driving noise. The uniform ergodicity of the volatility process and exponential ${\alpha}$-mixing properties of the log price processes of given continuous time stochastic volatility models are obtained.

• Korean Management Science Review
• /
• v.19 no.1
• /
• pp.197-224
• /
• 2002

Our study focuses on the implementation of IS development methodology as the innovation of IS organization. We have two main research objectives. We Intend to understand the critical factors affecting the implementation process of IS methodology. We also intend to deeply analyze the relationship among the implementation processes of methodology. The whole innovation process is divided into detailed four levels tilth dynamic and evolving Point of clew a cognition level, an adoption level, an acceptance level and an usage level. The results of our study are as follows. The main factors affecting initiation level of the IS methodology are the innovativeness of IS members, the existence of champion manager, training, the existence of IS performance gap, executive supports for IS organization, and the relative advantage of IS development methodology At the Implementation level, It is understood that the existence of champion manager executive supports, training and the relative advantage of innovation are the main factors. However, the complexity of Innovation is a megative factor about the quality of accepting and using the methodology In Innovation process. In performing the Innovation process, the Previous level gives very notable affection to the continuous next level. However it's also understood that positive attitude of adoption level does not directly affect the quality of using Innovation. Therefore, IS managers must pay attention to manacle each level of the Innovation Process to successfully accomplish the Implementation of IS methodology.

• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.74-97
• /
• 2005

IDEF0 is the IEEE standard for functional enterprise modeling and has been used for business process modeling or process mapping in US and Europe. But it does not reflect the potential benefits of modeling and simulation of the dynamic aspects of an enterprise or a system. On the other hand, simulation tools concentrate mostly on the simulation of material flows and are difficult to include information flows and control flows. Additionally, the simulation models that include elements such as queues, event generators and process nodes is a visual interactive representation for the model builder, but is inconvenient for the domain expert. In an attempt to fill that void, we provide an integration of business process and simulation models in this paper. An enhancement of the IDEF0, called parameterized IDEF0, is proposed and its conversion mechanism to network simulation model is developed. Using this methodology, business process models for alternative systems can be evaluated and compared through simulation on time, cost, and quality metrics. As an application of the proposed methodology, economic evaluation of EDI (Electronic Data Interchange) for time-based BPR (Business Process Redesign) is demonstrated. In addition to BPR, the developed methodology may be further integrated with ABC (Activity Based Costing), TQM (Total Quality Management), and economic evaluation of information systems.

• IE interfaces
• /
• v.25 no.2
• /
• pp.170-177
• /
• 2012

Process control is essential to operate the semiconductor process efficiently. This paper consider fault classification of semiconductor based cyclic signal for process control. In general, process signal usually take the different pattern depending on some different cause of fault. If faults can be classified by cause of faults, it could improve the process control through a definite and rapid diagnosis. One of the most important thing is a finding definite diagnosis in fault classification, even-though it is classified several times. This paper proposes the method that one-class classifier classify fault causes as each classes. Hotelling T2 chart, kNNDD(k-Nearest Neighbor Data Description), Distance based Novelty Detection are used to perform the one-class classifier. PCA(Principal Component Analysis) is also used to reduce the data dimension because the length of process signal is too long generally. In experiment, it generates the data based real signal patterns from semiconductor process. The objective of this experiment is to compare between the proposed method and SVM(Support Vector Machine). Most of the experiments' results show that proposed method using Distance based Novelty Detection has a good performance in classification and diagnosis problems.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.73-84
• /
• 2003

Skin aging process on pre-menopausal women is a problem that needs to be prevented as early as possible. The decrease of oestrogen level which is one of the intrinsic factors of the skin aging process will affect the skin biological process, due to oestrogen receptors on the skin. A number of researches conducted on pre-menopausal women with the allocation of oestrogen hormone resulted in delaying the skin aging process. The administration of soy isoflavon, a phytoestrogen found in daily food, on pre-menopausal women is hoped to be able to prevent skin aging process, even clinically or molecular biologically. This research aims to explain the benefit of administering of soy isoflavon on skin aging process. The design of the research is randomised controlled trial (RCT). As many as 60 pre-menopausal women were collected with simple random sampling method. Soy isoflavon is an independent variable, while skin aging process is a dependent variable assessed from the hydration, sebum level, average roughness, depth of wrinkles, skin clarity, length of the telomere. Analysis was conducted using t and MANDVA tests and.the result showed a significance (F = 10,439; p = 0,001) over the allocation of soy isoflavon to the whole variable dependent, including the telomere length and the skin hydration, meant that allocation of soy isoflavon could delay skin aging process.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.347-354
• /
• 1999

Statistical Process Control(SPC) which uses control charts is widely used to inspect and improve manufacturing process as a effective method. A parametric method is the most common in statistical process control. Shewhart chart was made under the assumption that measurements are independent and normal distribution. In practice, this assumption is often excluded, for example, in case of (equation omitted) chart, when the subgroup sample is small or correlation, it happens that measured data have bias or rejection of the normality test. A bootstrap method can be used in such a situation, which is calculated by resampling procedure without pre-distribution assumption. In this study, applying bootstrap percentile method to (equation omitted) chart, it is compared and evaluated standard process control limit with bootstrap percentile control limit. Also, under the normal and non-normal distributions, where parameter is 0.5, using computer simulation, it is compared standard parametric with bootstrap method which is used to decide process control limits in process quality.