• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.41-49
• /
• 2017

Process quality control, which prevents problems and risks that may occur in products and processes, has been recognized as an important issue, and SPC techniques have been used for this purpose. Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. $C_p$ and $C_{pk}$ are traditional PCIs. These traditional $C_p$ and $C_{pk}$ were used only as a measure of process capability, taking into account the quality variance or the bias of the process mean. These are not given information about the characteristic value does not match the target value of the process and this has the disadvantage that it is difficult to assess the economic losses that may arise in the enterprise. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. $C_{pm}$ is considers both the process variation and the process deviation from target value. And $C_{pm}{^+}$ is considers economic loss for the process deviation from target value. In this paper we developed an improved Expected Loss Capability Index using Reflected Normal Loss Function of Spring. This has the advantage that it is easy to realistically reflect the loss when the specification is asymmetric around the target value. And check the correlation between existing traditional process capability index ($C_{pk}$) and new one. Finally, we propose the criteria for classification about developed process capability index.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.3
• /
• pp.129-134
• /
• 2004

The Available Transfer Capability (ATC) is defined as the measure of the transfer capability remaining in the physical transmission network for further commercial activity above already committed uses. The ATC determination s related with Total Transfer Capability (TTC) and two reliability margins-Transmission Reliability Capability (TRM) and Capacity Benefit Margin(CBM) The TRM is the component of ATC that accounts for uncertainties and safety margins. Also the TRM is the amount of transmission capability necessary to ensure that the interconnected network is secure under a reasonable range of uncertainties in system conditions. The CBM is the translation of generator capacity reserve margin determined by the Load Serving Entities. This paper describes a method for determining the TTC and TRM to calculate the ATC in the Bulk power system (HL II). TTC and TRM are calculated using Power Transfer Distribution Factor (PTDF). PTDF is implemented to find generation quantifies without violating system security and to identify the most limiting facilities in determining the network’s TTC. Reactive power is also considered to more accurate TTC calculation. TRM is calculated by alternative cases. CBM is calculated by LOLE. This paper compares ATC and TRM using suggested PTDF with using CPF. The method is illustrated using the IEEE 24 bus RTS (MRTS) in case study.

• Journal of Korean Society for Quality Management
• /
• v.5 no.1
• /
• pp.3-10
• /
• 1977

The research on the process capability is the basis for quality design, operation standard and so on. In this study, histogram of the measured value for the cutting process and calculation of the capability factor Cp are established, resulting in the classification of 4 grades, and necessary measures for them are presented. The advancement of productivity is the most significant result of this study. The processing time per piece for those stabilized processes having the capability factor 1.33 and above is lessened, and the advancement in quantity capability is made possible permitting dispersion of standard up to the tolerance limit. The exact knowledge of process capability is most important for the quality design system. For the efficient application of this result of the research, a systematic and positive cooperation by the whole company members is needed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.347-356
• /
• 1998

For assessing the capability of a process, the quantification of process location and variation is central to understanding the quality of units produced from the manufacturing process. Conventional process capability indices is insufficient to drive out the information for process condition, furthermore it is very difficult to evaluate the process capability accurately when the target value is not consistent with the center of specification, and/or the shape of distribution is changed, but the process incapability indices is enable to provide more detailed information to evaluate the process capability by dividing information about the process mean and variance. In this paper, we have a brief review and comparison about these indices, provide an understanding of the relationships between the process capability indices and the incapability indices. And we explore the strengths and weakness of these indices as they apply to normally distributed process, and to examine the effect that non-normality has on these indices.

• Asia pacific journal of information systems
• /
• v.15 no.4
• /
• pp.109-133
• /
• 2005

The purpose of this study is to develop and validate a model of firm's IT capability based on IT resources such as IT infrastructure, IT personnel, and IT routine. To do this, the study defined IT capability as a third-order factor model and identified three conceptual dimensions of IT capability: IT infrastructure flexibility, IT personnel expertise, IT resource management capability, IT resource management capability indicates a capacity generated by IT routines, a new IT resource type identified in this study. The validity of the proposed model is evaluated with 243 firm level data using LISREL. The results of confirmatory factor analysis(CFA) demonstrated that the model is highly reliable and valid. Additionally, it was found that IT routines have a high potential as a new IT resource category.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.61-67
• /
• 2003

This paper presents a power transfer capability calculation algorithm considering initial maximum power transfer capability. In this method initial maximum power transfer capability is calculated first. Then, the initial value of active power outputs of generators is gotten for power transfer capability calculation. The proposed method is applied to IEEE-24 Reliability Test System and the results show the effectiveness of the method.

• Journal of Information Technology Applications and Management
• /
• v.31 no.3
• /
• pp.165-179
• /
• 2024

Although firms with advanced analytics and machine learning (which is often called AI) capabilities are considered to be highly successful in the market by making decisions and actions based on quantitative analysis using data, the scarcity of historical data and the lack of right data infrastructure are the problems for the organizations to perform such projects. The objective of this study, is to identify a road map for the organization to reach data capability maturity to become AI matured organizations. First, this study defines the terms, AI capability, data capability and AI matured organization. Then using content analyses, organizations' data practices performed for AI system development and operation are analyzed to infer a data capability roadmap to become an AI matured organization.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.127-132
• /
• 2014

This study is concerned with process capability index in single process. We enumerated issues on the calculation of process capability index and described the effects of these issues. We explained the development process and the reason of the representative existing process capability indices. We investigated whether the indices agree with the concept of process capability and drew the problems from those results. In addition, we proposed alternative and direction to seize the process capability necessary to the field.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.495-508
• /
• 2020

Economic integration is an indispensable trend in all countries. However, besides the advantages that economic integration brings, there are also disadvantages, such as competition between businesses among states in export activities. Vietnam is a developing country with many advantages, especially, the seafood exporting industry. However, with competitive pressure as well as strategic constraints, Vietnamese seafood exporters still face many difficulties. Therefore, the case study of the Kien Giang province of Vietnam is used to analyze the factors affecting the competitiveness of seafood exporting enterprises. The study applied quantitative research methods with a survey of 350 seafood exporting enterprises in Kien Giang province to achieve the research objectives. The research results identified eleven key factors affecting the competitiveness of seafood exporting enterprises, including (1) vision and strategy of leader; (2) human resources management capability; (3) organization capability; (4) customer-responsive marketing capability; (5) relationship management capability; (6) technical capability; (7) competitors reaction capability; (8) business environment adoption capability; (9) financial capability; (10) products and services innovation capability; and (11) branding management. The research results provided the basis to propose some managerial implications to improve the competitiveness of exporting enterprises in the context of the global economic integration.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.3
• /
• pp.11-25
• /
• 2006

It is necessary to deal with the process capability index carefully because it has been developed with certain assumptions. Companies make a decision on processes through the results obtained by using and treating data extracted from the processes. However if they have incorrect or wrong results, they cannot lead to proper outputs but also bring to loss of the competition in quality. Therefore, this study will show a method to analysis Cp (process capability ; CP) and an idea of mass-production on Pp (process performance ; PP) based on the Sigma Estimate which is one of the uncertainty in the process capability index and makes a lot of error. To apply this method, it is essential to understand and to analyze the processes exactly. Especially, it is required to establish the more accurate process capability index that can quickly and properly respond to changes on processes to recognize the small changes on the process which lies in specification in mass production system that the continual monitoring of quality managers is required.