• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.107-117
• /
• 2008

OBE(On Board Equipment) of IR(Infrared)/RF(Radio Frequence)-DSRC(Dedicated Short Range Communication) are set up 1.25 million cars because Korea Highway Cooperation supplied in HiPass(Domestic Electronic Toll Collection System). But this DSRC system has strength and weakness of service for BIS(Bus Information System) or UTIS(Urban Traffic Information System) because BIS and UTIS are required vary high communication's performance and management. In this paper, Efficiency of IR/RF-DSRC is analyzed performance of MAC(Medium Access Control) by computer simulation for services of BIS or UTIS, so Suggested to be commensurated with medium of there service. Specially, DSRC is needed high mobility and throughput in the vary short communication range, so Analysed the transmission rate of data in each communication medium over the specific character of the MAC frame.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.784-790
• /
• 2012

In this paper, we propose a upstream transmission method to extend coverage in visible light communication (VLC) systems. We extend transmission distance by using focused infrared(IR) light emitting diodes(LEDs). Since the focused light covers just limited area, it might have a difficulty in transmitting data if the transmitter and receiver are not properly aligned. To solve this problem, we arrange multiple IR-LEDs in different direction and select a single best performing IR-LED among multiple IR-LEDs. Also, the transmission performance is periodically checked and another IR-LED is reselected to support the required quality of service (QoS) and to minimize battery consumption required by a mobile terminal.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.497-498
• /
• 2008

모바일 폰에서 IrDA를 통하여 개인정보 (전화번호부, 동영상, 사진등) 송수신시 IrMC, IrOBEX 그리고 HDLC 프로토콜 기반위의 IrLAP등의 프로토콜 스택을 사용하고 있다. Primary, secondary 두 mobile phone 간에 IrLAP layer의 payload data 송수신시 이용되는 3가지 physical layer schemes 중 전송속도 1l5.2kbps data rate의 제안된 표준인 Asynchronous(Async) frame 방식을 이용한다. [1] 현재의 모바일 폰에서는 Async frame scheme을 구현하기 위한 인터페이스 방식 중 UART 인터페이스를 이용하여 구현하고 있다. 현 모바일 폰에 이미 구현 되어 있는 기존 UART의 FIFO 제어 방법과 Interrupt service routine의 제어 알고리즘을 개선하여 기존 제어 방식과 비교하고 향상된 성능의 결과는 Throughput로 도출한다. 현 모바일 폰에서 사용자가 개인 정보 data등을 저장할 수 메모리 공간이 점점 늘어나고 있는 추세이다. Camera의 해상도 현 5Mega pixel까시 지원되고 동영상 파일 등도 근거리 무선통신인 IrDA로 송수신할 수 있으므로 본 성능비교 file의 size는 100Mega 이상도 비교할 수 있도록 하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.73-78
• /
• 2015

Touch panel is mainly applied to pressure type touch panel but it occur a low recognition rate and error during long-term use. So, it is partly applied to capacitive touch panel to compensate for these problems but it also can occur a same problems via pollutions. Touch technology has developed a various method but it is not used because of high costs and difficult installation process. So, in this paper, we proposed an input method of touchless panel using IrDA matrix. This method is conducted using an IrDA Matrix composed of depth sensor. It is possible to offer a various contents for multi user. The proposed technology need a development of a high sensitivity sensing method and high-speed processing method of position information for Seamless operation control. And, it is required high-precision drive technology. Also, we proposed a Seamless user recognition for interactive contents service through a touchless panel using IrDA matrix.

• Journal of Digital Contents Society
• /
• v.10 no.3
• /
• pp.469-477
• /
• 2009

This study is about Augmentative and Alternative Communication as handicapped people actively pursue their life. Especially, although there are many ways and devices for communicating the same as a normal person, descriptive supplementation and sustaining studies are needed for perfect communication as a normal person. The purpose of the paper is to help handicapped people who have hardships about communication. This study develops the function of Smart Workflow AAC(Augmentative and Alternative Communication) and IR sensor_based context aware function that can offer services convenient to classified handicapped people for helping them to communicate effectively. This system from an experimental basis has improved efficiency to communicate more harmoniously within individual handicapped situations to schedule management and communication of handicapped people.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.9-15
• /
• 2006

In this paper, signal processing techniques for noncoherent impulse-radio-based UWB (IR-UWB) communication system are proposed to provide system implementation of low power consumption and low complexity. The proposed system adopts a simple modulation technique of OOK (on-oft-keying) and noncoherent signal detection based on signal amplitude. In particular, a technique of a novel high speed digital sampler using a stable, lower reference clock is developed to detect nano-second pulses and recover digital signals from the pulses. Also, a 32 bits Turyn code for data frame synchronization and a convolution code as FEC are applied, respectively. To verify the proposed signal processing techniques for low power, low complexity noncoherent IR-UWB system, the proposed signal processing technique is implemented in FPGA and then a short-range communication system for wireless transmission of high quality MP3 data is designed and tested.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.556-562
• /
• 2005

In this paper, we propose interleaved super-orthogonal convolutional coded ultra wide-band impulse radio(ISOC-UWB-IR) system, and analyze its performance. The proposed system uses interleaver and deinterleaver to decorrelate the temporal correlation of the fading process and to obtain the diversity gain. We also suggest the three types of interleavers, which are pulse-wise interleaver(PI), pulse sub-group-wise interleaver(PSGI), and pulse group-wise interleaver(PGI). Performance analysis result shows that the interleaving scheme, rather than the code rate of super orthogonal convolutional code(SOC) encoder, affects the performance for the Rayleigh fading channel.

• Journal of Korea Multimedia Society
• /
• v.17 no.11
• /
• pp.1270-1278
• /
• 2014

The modern infrared (IR) imaging systems use mainly one or more wavelength bands among short wavelength IR (SWIR), middle wavelength IR (MWIR), and long wavelength IR (LWIR) bands. In the process of IR image synthesis and modeling, IR image wavelength-band conversion which transforms arbitrary band image to other band one is required. The wavelength-band conversion procedure includes a temperature estimation process of an object surface. However, in this procedure, an approximated Planck's radiation equation causes errors in estimated temperature. In this paper, we propose an estimation temperature error attenuation method in IR image band conversion procedure. The estimated temperature is corrected with a slope information of radiance according to it. The corrected temperature is used for generation of the other band IR image. The verification of proposed method is demonstrated through the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.662-668
• /
• 2013

Mobile communication systems have been adopting link adaptive transmission schemes such as adaptive modulation and coding (AMC) and hybrid-ARQ (HARQ). Incremental redundancy (IR) HARQ scheme is known to be highly efficient in terms of throughput and power consumption and can be a good solution for mobile communication systems. In this paper, we propose an IR-HARQ scheme based on dual-diagonal parity-type block LDPC codes in which we define a transmission priority of coded bits and propose the sub-packet construction rule. We present the throughput performance of IR-HARQ with various modulation and coding and multi-antenna modes. Consequently, the proposed scheme provides the improvement of system throughput by elaborate link adaptation with CQI information.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.53-58
• /
• 2005

We designed a weld monitoring system with UV and IR sensors using a embedded DSP controller for implementing a distribution system; running stand alone and communication with outside by industrial standard protocols. Also this system provided a USB port in order to be acquiring data in PC. The user interface program in PC visualized the IR and W data in time, frequency and state space. A correlation of IR and UV signals showed closely related to weld quality. A rapid change of geometry can be found through a moving average filter. And the average value of IR signal at an interval represented a welding width and depth. Through these results, we proposed a monitoring algorithm for a integer type DSP.