• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.141-147
• /
• 2005

Nanomaterial $TiO_2-SiO_2$ was synthesized by hydrolysis and condensation process using 2-propanol(2-PrOH) and was characterized by FT-IR, DSC, XRD and FE-SEM. FT-IR spectra were measured to investigate Ti-0-Si absorption peak. DSC thermal analysis results appllied to Ozawa equation were used to calculate to activation energy of crystallization. It was found that the changes of X-ray diffraction patterns and FWHM obtained XRD measurement depended on calcination temperature. In FE-SEM analysis, particle size changed by quantity changes of Ti-alkokide.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.185-187
• /
• 2017

Combining the AKARI Point Source Catalog and the 37-month Monitor of All-sky X-ray Image (MAXI) catalog, the infrared and X-ray properties of nearby active galactic nuclei were investigated. The 37-month MAXI catalog tabulates 100 nearby Seyfert galaxies, 73 of which are categorized into Seyfert I galaxies. Among these Seyfert galaxies, 69 ones were found to have an AKARI infrared counterpart. For the Seyfert I galaxies in this sample, a well-known correlation was found between the infrared and X-ray luminosities. However, the observed X-ray luminosity of the Seyfert II galaxies tends to be lower for the infrared luminosity than the Seyfert I galaxies. This suggests that the X-ray absorption is significant in the Seyfert II galaxies. The Seyfert II galaxies seem to have a bimodal distribution of the IR color between $18{\mu}m$ and $90{\mu}m$. Especially, a large fraction of the Seyfert II galaxies exhibits a redder IR color than the Seyfert I galaxies. A possible origin of the redder IR color is briefly discussed, in relation to the star formation activity in the host galaxy, and to the X-ray absorption.

• Journal of the Korean Ceramic Society
• /
• v.31 no.7
• /
• pp.695-702
• /
• 1994

Current study was undertaken to explain the structural evolution and corresponding changes in the properties of calcium aluminate glasses with the variation of SiO2 doping concentration. Calcium aluminate glasses in the compositional ranges of (100-x)(0.6CaO+0.4Al2O3)+xSiO2(where x=0~60) were fabricated. DTA analysis confirmed an anomalous behavior in glass transition temperature (Tg) with the maximum of 887$^{\circ}C$ and minimum of 859$^{\circ}C$ when x=5 and 50, respectively. densities and refractive indices monotonically decreased with increasing SiO2 content and IR transmitting cutoff shifted to shorter wavelength side when the amount of added SiO2 exceeded 5 mole%. IR fundamental vibration absorption peaks showed the change that NBOs were inclined to SiO4 tetrahedron in the low-silica region and NBO per SiO4 tetrahedra changed from 2 to 0 with increasing silica content. Based on the analysis of IR fundamental vibration absorption peaks, the model of the structural change can be proposed in three step: 1) SiO4 scavenged the NBOs located at AlO4-tetrahedra, which resulted in the increased of Tg values, 2) NBOs located in the main network again with a decrease in Tg, and 3) dominated by the decrease in the relative amount of NBOs in the glass system, where Tg re-increased.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.492-498
• /
• 2014

Lotus(Nelumbo nucifera gaertn) is intimate plant to many people that it has clean and noble characteristics despite growth in the mud. Especially Lotus seedpods, byproduct of lotus, are rich in oligometric procyanidins and could be a new source of procyanidins. Procyanidins, also known as condensed tannins, are a class of polyphenols. In other words lotus seedpod contains plenty of tannins. Commonly tannins colorants could increase adsorption and fastness properties in fabric dyeing. This study was made to investigate colorants characteristics of lotus seedpod and various colorfastness properties of dyed silk fabrics. The wavelength of maximum absorption of lotus seedpod solution appeared at 273.5 nm from UV-vis spectrophotometer. From the results of FT-IR spectra measurements, IR absorption band of lotus seedpod colorants appeared at $3415cm^{-1}$, $2900cm^{-1}$ and $1620cm^{-1}$ by tannin structure. And tannin ingredient contents was the highest at pH 9 and flavonoid at pH 11. Lotus seedpod colorants showed relatively good affinity at pH 3 on silk fabrics and optimum dyeing temperature and time for silk was for 50 min, at $80^{\circ}C$. K/s of Light fastness according to different washing method was the highest at process including ironing and ${\Delta}E$ was the lowest. All of fastness(Light rubbing laundering perspiration dry cleaning) showed excellent results over 4 or 4-5 grades.

• Journal of the Korean Chemical Society
• /
• v.40 no.9
• /
• pp.623-629
• /
• 1996

In order to identify antibiotic substances in the extract of a lichen, Umbilicaria vellea, the extract was chromatographed and two compounds were isolated. Compound I which showed antifungal and antibacterial activities, melted around 129∼132$^{\circ}C$ and showed UV absorption at 217, 265 and 300 nm. It showed a molecular ion at m/z 196. Its molecular formular was confirmed to be $C_{10}H_{12}O_4$ from elemental analysis. From its IR and NMR data it was identified to be ethyl 2,4-dihydroxy-6-methyl benzoate. Compound II melted around 58∼59$^{\circ}C$ and showed UV absorption at 212, 276 and 282 nm. It showed a molecular ion at m/z 124 and molecular formular was confirmed to be $C_7H_8O_2.$ From the analysis of its IR and NMR spectra it was identified to be 5-methyl-1,3-benzenediol.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.3_4
• /
• pp.364-372
• /
• 2003

In this study, the characteristics of catechol tannin and pyrogallol tannin contained in Pteridium aquilinum were analysed by It spectrum. Silk fabrics were dyed with Pteridium aquilinum extracts using various mordants, and their dyeing properties were discussed. Additionally the fastness the water digestion, perspiration liquid digestion and light irradiation were investigated. IR spectrum of catechol tannin showed bands of O-H at $3417cm^{-1}$, C-H at $2930cm^{-1}$, C=0 at $1722cm^{-1}$, C=C at $1644cm^{-1},\;CH_2\;at\;1402cm^{-1}$. And IR spectrum of pyrogallol tannin showed bands of O-H at $3409cm^{-1}$, C-H at $3003cm^{-1}\;and\;2933cm^{-11}$, C=0 at $1701cm^{-1}$, C=C at $1582cm^{-11},\;CH_2\;at\;1410cm^{-1}$, CO at carboxylic acid and carboxylic acid ester at $1287cm^{-1}\;and\;1135cm^{-1}$. The maximum absorption wavelength of the extracts appeared at 270.0nm and 311.5nm. The optimum conditions for dyeing silk fabric with Pteridium aquilinum extracts were $80^{\circ}C$, 60min. Surface color of the silk fabric dyed with Pteridium aquilinum extracts was 2.7Y Surface color of the pre-mordanted fabrics with Al, Cu and Fe were 4.3Y, 2.5Y and 4.7Y, respectively. And Surface color of the post-mordanted fabrics with Al, Cu and Fe were 3.7Y, 2.8Y and 0.2GY. The water fastness and the alkaline perspiration fastness were improved in the Al-mordanted silk fabrics. By acidic and alkaline perspiration treatment, ${\Delta}E of the unmordanted fabrics was lower than hat of pre- and post- mordanted fabrics. Also after 40hour irradiation, ${\Delta}E of the unmordanted fabrics was lower than that of pre- and post- mordanted fabrics.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.56-60
• /
• 2005

We studied fire properties of MOF(Metering Out Fit) insulation cover and field condition of 22.9kV power receiving system. $49.5\%$ of formal equipments were installed indoors, whereas $40.8\%$ of informal equipments were installed as H-type. Insulation treatment was not done at a $22.4\%$ ratio of main line($27.7\%$ of transformer, $70.2\%$ of COS, $10.4\%$ of MOF). Fire pattern analysis showed that the fire started at the secondary part of OC wire. In the result of DTA(Differential Thermal Analysis), normal cover showed exothermic reactions at $310^{\circ}C,\;399^{\circ}C\;and\;510^{\circ}C$ (endothermic reactions at $382^{\circ}C$). Whereas damaged cover showed exothermic reactions at $412^{\circ}C$(endothermic reactions at $389^{\circ}C$). In the result of TGA(Thermo Gravimetric Analysis), the thermal weight change of normal cover was similar compared to damaged cover. In the result of FT-IR analysis, normal cover showed absorption peaks at $3,024cm^{-l},\;2,921cm^{-l},\;1,600cm^{-1},\;1,492cm^{-1},\;1,451cm^{-1},\;1,154cm^{-l},\;1,027cm^{-1},\;906cm^{-1}$. Whereas, in case of tracked cover, the absorption peaks that were shown in normal cover disappeared and different absorption peak was shown at $966cm^{-1}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.327-340
• /
• 1996

In this study, a series of $LiNbO_{3}$ crystals with different [Li]/[Nb] ratios, congruent $LiNbO_{3}$ crystals with doped Mg and with Mg and codoped with Mn were grown by the Czocharalski method. These were investigated by UV and IR spectrophotometry. Stoichiometry dependences of the UV absorption edge and the $OH^{-}$ absorption spectra were studied with different [Li]/[Nb] ratios. The position of the UV absorption edge adn the shape and peak point of the $OH^{-}$ absorption spectra changed monotonously upto a critical concentration of Mg ions. The mechanism of the incorporation of Mg ions changes at this concentration. The decomposition of the $OH^{-}$ absorption spectra using a Gaussian lineshape function showed that in Li-deficient crystals the absorption spectra consist of five components in contrast to more or less perfect stoichiometric crystals which reveal to three components. On the basis of these results, the intrinsic and the extrinsic defect structure models in $LiNbO_{3}$ crystals were examined. The behaviour of $\nu$ (OH) reflects the defect structure and supports the Li-site vacancy model as the intrinsic defect structure model and the corresponding extrinsic defect model. A brief discussion is also given of the behaviour of $\nu$ (OH) in $LiNbO_{3}$ crystals simultaneously doped with several kinds of impurity.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.124-124
• /
• 2018

Polydopamine은 수중 접착력, 친환경 접착제, nanoparticle absorption 등 다양한 특성으로 많이 연구되고 있는 소재이다. 본 연구에서는 dopamine을 이용하여 수중 금속을 흡착시키는 thin film을 제작하였다. 종래의 Polydopamine coating 방법으로 wet coating 이 사용되고 있다. 하지만 wet 방식의 경우 시간이 오래 걸릴 뿐만 아니라 in-line, roll to roll 방식을 적용하는 것이 어렵기 때문에 생산적이지 않다. 이에 본 연구에서는 Atmospheric Pressure Plasma(APP)를 이용 하여 Polydopamine-like film을 coating 하였다. APP의 경우 vacuum system, solution tank가 필요 없고 in-line, roll to roll 방식을 적용 할 수 있기 때문에 더 경제적이고 생산적인 공정이다. 또한 기존의 Plasma polymerization 방법은 Plasma energy가 높기 때문에 source의 분자구조가 바뀌거나 atom 단위로 분해된다. source의 분자구조가 바뀌는 "Atomic polymerization", Neiswender-Rosskamp Mechanism이 적용되면 wet 방식 coating한 film과는 다른 특성을 갖게 된다. 하지만 APP polymerization은 Plasma energy가 vacuum plasma 보다 매우 낮기 때문에 stile polymerization mechanism을 구현 하는데 적합 하다. stile polymerization mechanism은 Plasma 내부에서 polymer source를 분해 성장 시켜서 Polymer film 얻는 것이 아닌 source의 분자구조가 깨지지 않으면서 polymer growing 시키는 방법이다. dopamine source의 분자구조를 최대한 유지하려고 하는 이유는 metal absorption과 같은 특성이 dopamine chemical structure에 영향을 받기 때문이다. 많은 논문들에서 dopamine의 catechol group이 metal absorption, adhesion force에 영향을 주는 주요 인자라고 주장하고 있기 때문이다. 그래서 본 논문에서는 Dopamine source의 형태를 보존하면서 Polymerization 하는 방법으로 APP process를 사용 하여 낮은 전압에서 Polydopamine-like film을 제작 하였다. APP system 의 Plasma 방전부 에 Dopamine source를 유입하기 위하여 본 논문에서는 Piezo Spray 방식을 사용 하였다. Dopamine을 evaporator 하는 것이 어렵고 chemical composition이 유사한 monomer를 사용해서 Plasma Polymerization으로 Dopamine 분자 구조를 재현하는 것도 어렵다. 그래서 본 연구에서는 Dopamine을 water에 immerse 하고 Dopamine solution을 mist 상태로 만들어서 Plasma discharge area에 유입하였다. 이러한 방법으로 만들어진 film은 Polydopamine film은 아니지만 Polydopamine film과 유사한 Chemical composition, chemical structure, metal absorption을 갖는 것을 FT-IR, SEM, XPS을 이용 하여 확인 하였다. Dopamine source의 보존에 대하여 명확하게 확인하기 위하여 FT-IR을 측정 하였다. 전압에 따른 Benzene ring, hydroxyl group의 비율을 확인 하였다. 낮은 전압으로 coating 된 Polydopamine-like film 일수록 hydroxyl group peak($3400{\sim}3000cm^{-1}$)과 비교하여 Benzene ring peak($1600{\sim}1580cm^{-1}$ and $1510{\sim}500cm^{-1}$)이 흡수를 더 많이 하는 것을 확인 할 수 있다. 이것은 Benzene ring이 파괴되지 않고 보존되는 것을 보여준다. Dopamine에서 Benzene ring은 absorption main factor인 catechol에 있는 chemical structure이다. 즉 Benzene ring peak이 높을수록 Catechol이 잘 보존 되었다는 의미 이다. Catechol의 보존은 absorption main factor가 보존 된다는 의미 이다. 이러한 Polydopamine-like film으로 As, Cr, Mg, Cu 200ppm solution에 대한 filtration 능력을 확인 하였다. As, Cr, Cu, Mg 의 제거율이 각각 약25%, 35%, 45%, 65%인 것을 확인 하였다. 이 수치는 시중에 판매되는 제품들과 비교했을 때 300%~500% 향상된 수치 이다.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.354-363
• /
• 2011

Quantum-chemistry study was explored to investigate the electronic structures, absorption and phosphorescence mechanism, as well as electroluminescence (EL) properties of three red-emitting Ir(III) complexes, $(fpmqx)_2Ir$(L) {fpmqx=2-(4-fluorophenyl)-3-methyl-quinoxaline; L=triazolylpyridine (trz) (1); L=picolinate (pic) (2) and L=acetylacetonate (acac) (3)}. The calculated results show that the HOMO distribution for 1 is mainly localized on trz moiety due to its stronger ${\pi}$-electron acceptor ability, and HOMO for 2 and 3 is the combination of Ir d- and phenyl ring ${\pi}$-orbital. The higher phosphorescence yields and differences among 1-3 are investigated in this paper. In addition, the reasons of higher EL efficiency of 2 than 1 and 3 have been rationalized.