• 한국광학회지
• /
• 제31권3호
• /
• pp.142-147
• /
• 2020

본 연구에서는 Yb 광섬유 레이저 MOPA (master oscillator power amplifier) 시스템을 구축하여 고출력, 고효율의 근적외선 레이저 빔을 발진시키고, 이를 주기분극반전 준위상정합 비선형 광학 소자인 MgO:PPSLT에 단일 통과시키는 방식을 통하여 고출력 고효율 연속발진 녹색 레이저 빔을 생성하는 방법을 보고한다. 자발 펄싱을 억제할 수 있는 패브리-패롯 피드백 공진기 구조를 사용한 광섬유 레이저 주공진기를 사용하여 선폭이 좁고 선형 편광된 1064 nm 레이저 씨앗 빔을 안정적으로 생성할 수 있었으며, 이를 Yb 광섬유 증폭단에서 고출력으로 증폭시켰다. 증폭된 레이저 빔을 MgO:PPSLT에 통과시켜 고출력 고효율의 이차조화파를 얻을 수 있었는데, 이때 얻은 532 nm 레이저의 최고 출력은 기본 입사광의 출력이 25.0 W일 때 11.1 W였으며, 변환 효율은 44.4%를 얻었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1023-1024
• /
• 2008

This paper proposes a pedestrian counting system using line laser. By using a line laser and IR filter, the shapes of pedestrians are easily obtained without complex preprocessing. Also, the directions of pedestrians were able to distinguish by employing gradient information. In the experiment, the proposed method successfully counted the number of people with accuracy of about 97% and with processing time of 24ms per frame.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.927-933
• /
• 2006

The structural and electrical characteristics of PLZT thin films fabricated onto $Pt/IrO_2/Ir/Ti/SiO_2/Si$ substrates by a pulsed laser deposition were investigated to develop the high dielectric thin films for capacitor layer of semiconductor memory devices The slim region 14/50/50 PLZT thin films were fabricated by PLD and estimated the characteristics for memory application 14/50/50 PLZT thin films have crystallize into perovskite structure at the $600^{\circ}C$ deposition temperature, 200 mTorr of oxygen pressure, and 2 $J/cm^2$ of laser energy density. In this condition PLZT thin films had the dielectric constant as high as 985, storage charge density 8.17 ${\mu}C/cm^2$ and charging time 0.20 ns. Leakage current density was less than $10^{-10}A/cm^2$ up to 5 V bias voltage.

• Journal of Welding and Joining
• /
• 제23권5호
• /
• pp.55-60
• /
• 2005

A precise bonding technique, transmission laser bonding using energy transfer, for polymer micro devices is presented. The irradiated IR laser beam passes through the transparent part and absorbed on the opaque part. The absorbed energy is converted into heat and bonding takes place. In order to optimize the bonding quality, the temperature profile on the interface must be obtained. Using optical measurements of the both plates, the absorbed energy can be calculated. At the wavelength of 1100nm $87.5\%$ of incident laser energy was used for bonding process from the calculation. A heat transfer model was applied for obtaining the transient temperature profile. It was found that with the power of 29.5 mW, the interface begins to melt and bond each other in 3 sec and it is in a good agreement with experiment results. The transmission IR laser bonding has a potential in the local precise bonding in MEMS or Lab-on-a-chip applications.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.791-796
• /
• 2001

Welding using lasers can be mass-produced in high speed. In the laser welding, performing real-time evaluation of the welding quality is very important in enhancing the efficiency of welding. In this study, the plasma and molten metal which are generated during laser welding were measured using the UV sensor and IR sensor. The results of laser welding were classified into five categories such as optimal heat input, little low heat input, low heat input, focus off, and nozzle change. Also, a system was formulated which uses the measured signals with a fuzzy pattern recognition method which is used to perform real-time evaluation of the welding quality and the defects which can occur in laser welding. Weld quality prediction program was developed using previous weld results and statistical program which could show the trend of weld quality and signal was developed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.474-478
• /
• 1996

Process monitoring in laser welding is essential for automation and quality control of products. Various signals from laser welding, such as plasma, sound, optical signals, etc., are utilized for monitoring the process and detecting abnormal weld conditions. In this study, both W light from plasma formed above the weld pool and IR signal from the melting pool are detected with photodiodes and PC-based A/D board, and analyzed to give a guidance about the weld quality. Experimental results show the possibility of using the signals for predicting and evaluating the weld qualify and adapting into the system for on-line process monitoring.

• 한국광학회지
• /
• 제2권4호
• /
• pp.179-185
• /
• 1991

적외선 광원으로 $CO_2$ 레이저를 사용하였고 광속을 2.5 cm의 직경으로 확대하여 Twyman-Green 간섭계를 구성하였다. 각종 렌즈는 Ge 렌즈로, 광속분리기는 ZnSe 평행판으로 택하였다. Pyro-electric vidicon camera에 의해 CRT monitor에 간섭무늬를 제시하며 image card에 의해 digitize되고 PC로 강도분포가 입력되어 data처리된다. 여기서, 적외선 간섭무늬는 thermal paper 상에 기록하였다. 가시영역에서는 He-Nefp이저를 광원으로 하고 CCD 카메라로 검출하여 CRT monitor에 제시하였다. 파면수차함수, PSF, OTF가 계산되어 3차원 그래프로 제시되며 프린트 된다.

• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.293-299
• /
• 2015

We analyzed the damage effect on Glass Fibre Reinforced Plastics(GFRP) under air flow by irradiation of continuous wave near-IR laser. Damage process and temporal temperature distribution were demonstrated and material characteristics were observed with laser intensity, surface flow speed and angle. Surface temperature on GFRP rapidly increased with laser intensity, and the damaged pattern was different with flow characteristics. In case of no flow, penetration on GFRP by burning and flame generation after laser irradiation was appeared at once. GFRP was penetrated by the heat generated from resin ignition. In case of laser irradiation under flow, a flame generated after burning extinguished at once by flow and penetration pattern on GFRP were differently shown with flow angle. From the results, we presented the damage process and its mechanism.

• 한국레이저가공학회지
• /
• 제13권1호
• /
• pp.11-15
• /
• 2010

Indium tin oxide (ITO) provides high electrical conductivity and transparency in the visible and near IR (infrared) wavelengths. Thus, it is widely used as a transparent electrode for the fabrication of liquid crystal displays (LCDs) and organic light emitting diode displays (OLRDs), photovoltaic devices, and other optical applications. Lasers have been used for removing coating on polymer substrate for flexible display and electronic industry. In selective removal of ITO layer, laser wavelength, pulse energy, scan speed, and the repetition rate of pulses determine conditions, which are efficient for removal of ITO coating without affecting properties of the polymer substrate. ITO coating removal with a laser is more environmentally friendly than other conventional etching methods. In this paper, pattering of ITO film from polymer substrates is described. The Yb:KGW femtosecond laser processing system with a pulse duration of 250fs, a wavelength of 1030nm and a repetition rate of 100kHz was used for removing ITO coating in air. We can remove the ITO coating using a scanner system with various pulse energies and scan speeds. We observed that the amount of debris is minimal through an optical and a confocal microscope, and femtosecond laser pulses with 1030nm wavelength are effective to remove ITO coating without the polymer substrate ablation.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.711-713
• /
• 2017

본 논문에서는 800nm급 펨토초 레이저와 위상마스크를 이용하여 게르마늄이 첨가된 일반 광섬유(Corning SMF-28)에 FBG 센서를 가공하였다. 제작된 FBG 센서는 누적방사선 100 kGy급 감마선에 조사하여 방사선 영향을 평가하였다. fs-FBG-2 센서는 방사선 조사 중에 불완전한 광특성을 보였지만, fs-FBG-1 센서는 누적선량 100kGy에서 Bragg 파장변화가 10pm 이하로 나타나 뛰어난 내방사선 특성을 보였다.