• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1137-1140
• /
• 2002

A V-band low-noise amplifiers (LNA) based on the Millimeter-wave monolithic integrated circuit (MIMIC) technology were fabricated using high performance 0.1 $\mu\textrm{m}$ $\Gamma$-shaped pseudomorphic high electron mobility transistors (PHEMT＇s), coplanar waveguide (CPW) structures and the integrated process for passive and active devices. The low-noise designs resulted in a two-stage MIMIC LNA with a high S$\sub$21/ gain of 14.9 dB and a good matching at 60 ㎓. 20 dBm of IP3 and 3.9 dB of minimum noise figure were also obtained from the LNA. The 2-stage LNA was designed in a chip size of 2.3 ${\times}$1.4 mm$^2$by using 70 $\mu\textrm{m}$ ${\times}$2 PHEMT’s. These results demonstrate that a good low-noise performance and simultaneously with a high gain performance is achievable with GaAs PHEMT's in the 60 ㎓ band.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.115-122
• /
• 2004

Diff-Serv is a mechanism by which network service providers can offer differing levels of network service to different traffic, in so providing quality of service (QoS) to their customers. Because this mechanism has been deployed just for fixed hosts with the Token Bucket mechanism, DiffServ have been suggested can not satisfy the mobility service or the differential serrlce for Individual traffics. In this paper, we suggest WFQ mechanism for traffic conditioner and scheduling method for monitoring the AggF(Aggregate Flow) which will be controlled in edge nodes and border routers. So it will control traffic rate dynamically and suggest efficient usability of bandwidth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.3
• /
• pp.815-834
• /
• 2012

Recently, along with the innovative development of wireless communication techniques and mobile devices, mobile P2P services in mobile wireless networks have gained a lot of attention. In this paper, we propose a resource discovery scheme with data dissemination over mobile P2P networks. In the proposed scheme, each peer manages a local information table, a resource index table, and a routing table in a local database to enhance the accuracy and cost of resource discovery. The local information table stores the status of a mobile peer, and the resource index table stores the resource information of the neighbor peers via the ranking function. The routing table is used to communicate with the neighbor peers. We use a timestamp message to determine whether or not the resource index table will be changed before the resource information is exchanged. Our ranking function considers the interest and mobility of the mobile peer and prioritizes the resource information transmitted from the neighbor peers. It is shown via various experiments that the proposed scheme outperforms the existing scheme.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.274-278
• /
• 2006

무선 네트워크 기술의 발전으로 인해 매우 상이한 특성을 가지는 다양한 무선 시스템이 등장하였으며, 이들 무선 시스템은 상호 중첩된 영역을 가지기도 하면서 공존할 것으로 예상된다. 한편, 두 개 이상의 에어 인터페이스를 갖추고 다양한 서비스를 동시에 받을 수 있는 이동 단말들도 등장하고 있다. 이와 같은 환경에서 이동 사용자는 로밍하면서 끊김없는 통신을 지속할 뿐만 아니라 여러 개의 공존하는 무선 엑세스 시스템을 효과적으로 활용함으로써 응용의 서비스품질 요구에 대한 만족도를 높일 수 있다. 이에 본 논문에서는 차세대 네트워크 환경에서 이동 사용자가 여러 개의 서비스를 동시에 받는 경우 각 서비스에 대하여 서비스 품질을 보장하기 위한 새로운 종단 간 이동성 지원 방안을 제안한다. 이를 위해 본 논문에서는 종단 간 이동성 관리를 수행하는 IP agent 모듈을 새로이 정의하고, 핸드오버 시, 각 응용의 특성을 고려하여 응용 별로 가장 적합한 액세스 네트워크를 선택하여 핸드오버를 수행한다. 시뮬레이션을 통하여 응용 별 특성을 고려한 종단 간 이동성을 지원하는 제안하는 방안이 기존 방안들에 비해 서비스 품질의 보장이 더 잘 이루어짐을 알 수 있었다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.523-529
• /
• 2008

In this paper, we proposed mobile LCD module test device on embedded based, when operating the existing LCD, divide flicker clearly in full frame, and configuration so as to support between other CPU interface, MDDI, SPI, 24Bit RGB interface, etc. that is based on a high-speed CPU. In addition, when demand to test about each pixel of LCD, it is possible to change IP design of H/W, FPGA, but proposed system is application possible without other design changing. Proposed system is made smaller and equipped with battery, so secure with mobility for effective test the LCD/OLED module and it is able to test the pattern by the client program, for example exiting picture, mpeg, simple pattern test and test per pixel, scale, rotation, Odd/Even pixel per video, etc. From now on, if integrating with independent test system and it is configured that is able to mutual communication and test, it is expected to reduce consumption of human resources and improve productivity for LCD module test.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.355-364
• /
• 2010

A session transfer method, referred to as a Recipient Serving-call session control function (S-CSCF) Assured (RSA), is proposed in order to support both session mobility and consistency in IP multimedia subsystem (IMS) based next generation network (NGN). RSA session transfer simplifies a basic session transfer operation specified in [1] by using the user agent client (UAC) like characteristics of an S-CSCF. To show its efficiency, the session transfer delay and the traffic cost of RSA session transfer are investigated and compared with those of existing session transfer applications, including Assured and Consultative session transfers, by practically considering multiple session transfer failures. It is shown that RSA session transfer can further improve user experience by reducing session transfer delay as well as traffic cost than Assured and Consultative session transfers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.485-497
• /
• 2009

In this paper, we described DVB-S2 system for mobility. cross layer coding technique are needed to maintain the performance in deep fading channel. Cross layer coding is divided into two kinds of level. First level is Physical layer coding and, second layer is link layer or upper layer coding. Fixed on DVB-S2 short frame coding method as a physical layer, we simulated the various coding method as an upper layer coding. Furthermore, we analyzed the performance of each coding method on according to mobile vehicle speed, data rate, interleaving memory size, and IP packet size.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.554-563
• /
• 2014

The burgeoning growth of real-time applications, such as interactive video and VoIP, places a heavy demand for a high data rate and guarantee of QoS from a network. This is being addressed by fourth generation networks such as Long-Term Evolution (LTE). But, the mobility of user equipment that needs to be handed over to a new evolved node base-station (eNB) while maintaining connectivity with high data rates poses a significant challenge that needs to be addressed. Handover (HO) normally takes place at cell borders, which normally suffers high interference. This inter-cell interference (ICI) can affect HO procedures, as well as reduce throughput. In this paper, soft frequency reuse (SFR) and multiple preparations (MP), so-called SFRAMP, are proposed to provide a seamless and fast handover with high throughput by keeping the ICI low. Simulation results using LTE-Sim show that the outage probability and delay are reduced by 24.4% and 11.9%, respectively, over the hard handover method - quite a significant result.

• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.46-55
• /
• 2008

As a mobility support for IP have studied, Internet Engineering Task Force(IETF) standardized the Mobile IPv6(MIPv6) protocol. When a mobile node moves between subnets, MIPv6 maintains connectivity to network and supports seamless communication, and these processes are called a Handover. Whenever the mobile node moves between subnets, the Handover is performed. The mobile node can not communicate during the Handover. This period is Galled Handover latency. To reduce this latency, mipshop working group standardizes Fast Handovers for Mobile IPv6(FMIPv6), but latency which the mobile node registers its new care-of address to a home agent and a correspondent node is still long. To solve this problem, we propose a scheme that the mobile node registers the new care-of address to the home agent and initiates Return Routability procedure in advance during layer 2 handover, based on FMIPv6 and IEEE 802.11. We analyze MIPv6, FMIPv6 and the proposed scheme in term of packet transmission cost during the Handover. Compared to MIPv6 the proposed scheme gains 79% improvement, while it gains 31% improvement compared to FMIPv6.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.146-153
• /
• 2009

Recently, the research relative to NGN(Next Generation Network) is progressing in 3GPP(The 3rd Generation Partnership Progect), IETF(Internet Engineering Task Force), and so on. Although user needs frequently mobility which is various service pattern, In accordance with the development of these various applications, IMS(IP Multimedia Subsystem) and hierarchical networks ie, Femtocell/WiBro/3G etc is constructed for more user demands which provide service in anytime, anywhere. It is necessary to optimum network selection criterion which consider to wireless signal quality add to user service profile and service network traffic balance. NGN also needs a method to perform heterogeneous handover and to constraint Ping-pong phenomenon when using existing terminal-based handover decision. This paper proposes scheme for network selection and heterogeneous handover procedure in hierarchical wireless multi-access network based on SIP-MIH(Session Initiation Protocol-Media Independent Handover) with IMS by using user service profile that the considerations are dealing with not only selection and registration of various access network but also easy of developing the terminal.