• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.737-742
• /
• 2014

This paper reports a customized silver ink and its inkjet printing process on a cellulose electro-active paper (EAPap). To synthesize a silver ink, silver nanoparticle is synthesized from silver nitrate, polyvinylpyrrolidone and ethylene glycol, followed by adding a viscosifier, hydroxyethyl-cellulose solution, and a surfactant, diethylene glycol. The silver ink is used in an inkjet printer (Fujifilm Dimatix DMP-2800 series) to print silver electrodes on cellulose EAPap. After printing, the electrodes are heat treated at $200^{\circ}C$. The sintered electrodes show that the thickness of the electrodes linearly increases as the number of printing layers increases. The electrical resistivity of the printed electrodes is $23.5{\mu}{\Omega}-cm$. This customized ink can be used in inkjet printer to print complex electrode patterns on cellulose EAPap to fabricate flexible smart actuators, flexible electronics and sensors.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2004

Amount of residual ink solvent on the packaging materials from Korea, Japan and Europe was measured and compared. The amount of packaging materials from Korea was much higher than that of Japan and Europe. To reduce the residual amounts of ink solvent, aging condition of printed packaging materials including aging time and temperature was modified and evaluated. Aging with high temperature and short time ($60^{\circ}C$ and 24 hours) was more effective for reduction of residual amount of ink solvent than that with low temperature and long time. To find out change of reduction pattern of residual amount of solvent according to plastic packaging material, several monolayer and multilayer packaging materials were selected. Among the monolayer packaging materials, the amount of EVOH and PET was lower than that of polyolefin plastic film including PE and PP. PP/EVOH/PET among the selected multilayer film showed the lowest amount of residual ink solvent on food packaging materials. Result of this research revealed that the residual amount of ink solvent can be reduced by proper selection of aging condition with and by appropriate application of mutilayer plastic film.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.1-9
• /
• 2005

Mixed dyeing were carried out ll"ing yellow, red and purple loess as mineral dyes verify their dyeability, color shade and fastness. The proper density of Chinese ink were 0.5, 1.0, 2.0, 2.5, $5\%$(o.w.b). The grinded chinese ink had better stainability compared with the general Chinese ink. The mixed dyeing improvement of stainability in the density of loess of $40\%$(o.w.b) among the yellow, red, and purple loess. The colors in the mixed dyeing with Chinese ink were $3.801\~8.13Y,\;0.128\~7.038Y\;and\;4.222\~9.304Y$. The colorfastness were 1-2 in the homogeneous dyeing with Chinese ink. It was improved 1-3 in the mixed dyeing. Light colorfastness of the homogeneous and mixed dyeing were excellent as a value of 5. The dry rubbing fastness in the homogeneous dyeing was 3-3.5, and 3 in the wet rubbing. As for the mixed dyeing, the dyes of Chinese ink showed poor diffusion into the fiber, resulting in low fastness due to the existence of the dyes on the surface.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.42-48
• /
• 2012

In the 21st century, the printing industry as well as the IT industry has made rapid development. However, despite these technological advancement in the printing industry, it is still harmful for the environment, the state regulation is insufficient. Therefore, we studied the printability for the existing heat-set web inks and the newly created phenol-free eco-inks. This ink was made by reacting rosin and unsaturated dibasic acid and ester reactant, ester reactant was used instead of phenol. Printability test were used in the IGT printability tester. Experimental conditions, the temperature $22.7^{\circ}C$, humidity 57% under conditions of 0.6cc of ink supply, the print speed 1m/sec, pressures were set at 250N. As results of this study, we were able to get the following conclusions. The properties of phenol-free ink is the same as the existing inks. So we are thought to improve some characteristics such as dispersion, able to replace the existing ink.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.524-524
• /
• 2006

For decades, the pursuit of volume commercialization of low-power reflective displays with a paper-like look has been an unfulfilled dream. While steady technical progress was made throughout the late 1990s, there were still no volume products incorporating electronic paper displays (EPD) on the market. Now, microencapsulated electrophoretic display technology, also called electronic ink, has moved into volume production with a frontplane laminate (FPL) display component called E Ink Imaging Film™. This film is coated roll to roll on a flexible plastic substrate and integrated into a display module. Today, all-plastic segmented displays are being shipped as well as displays with electronic ink FPL being driven by glass TFT backplanes. A roadmap to active matrix flexible electrophoretic displays is being enabled by rapid technical progress on flexible TFT backplanes by a variety companies. Each of the approaches to these backplanes and flexible active matrix displays has different advantages for the various market segments being pursued including large format flexible displays for e-news and other reader applications, rollable displays for compact readers, and high resolution small format displays up to 400 ppi that can have fully integrated drive electronics to reduce size and drive down costs. Backplane approaches include Si on plastic, organic transistors on plastic, and Si transistors on flexible stainless steel substrate. Progress is also being made on next generation inks, including more reflective inks with higher contrast ratios. A full color 6 inch, 170 pixel per inch (PPI) active matrix display using a newer generation ink has been developed and this will be described and demonstrated. Large format segmented flexible displays will also be described.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.41-48
• /
• 2012

Materials used for the inks in the printing industry is an important material following the paper. The composition of the ink is pigment and organic solvents. However, Ink is used in a variety of chemicals, they are classified as non-green. Therefore, rosin-modified phenolics manufactured by the reaction of phenol and formaldehyde can take the place of eco-phenol free resin and by experiment density, gloss, trapping, contrast and dot gain of printing has been studied as printability. The result of study can support that the properties of printing using eco-phenol free resin such as density, gloss, contrast and trapping is similar to existing ink. In the part of dot gain, the result is excellent. So we were thought to be able to improve some characteristics such as dispersion of black ink, that will be possible for the field applicability.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.31-44
• /
• 2010

Ever since the introduction of offset lithography, an operator have looked for ways to improve the process by reducing need for dampening solution. Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for lithography printing must work with dampening solution. The dampening solution may cause the emulsification of ink by the printing pressure in the printing nip. Emulsified ink changed viscosity, tack and causes problems such as bad transfer, uniform density and printed mottle. For a high quality web printing, we studied the effect of emulsified heat-set web inks on the printability, such as amount of ink transfer, printed density and uniformity. For this study, we were carried out by using IGT printability tester C1. For determination of ink properties using the spread meter and Thwing Albert Ink-o-meter, and using the densitometer and image analysis for printed quality determination. The experimental results of this study, we look forward to can be used as the basis for improve of the web print quality.

• Laser Solutions
• /
• v.8 no.2
• /
• pp.21-32
• /
• 2005

The excimer laser ablation of a polymer occurs by the excitation of chemical bonds to energy levels that are above the dissociation energy. In this process, however, fragmented debris is finally ejected explosively by the scission of bonds and accumulates on the material surface. In the present work, a process for eliminating surface debris contamination generated by the laser ablation of a polymer is developed. The proposed approach for removing surface debris utilizes an erasable ink pasted on a polymide. The ink pasted polyimide is ablated by KrF excimer laser. The surface debris ejected from the polyimide is then combined with the ink layer on the polymer. Finally, both the surface debris and the ink layer are removed using adhesive tape or alcohol solvent. The results suggest that the erasable ink method is a simple, low cost, and extremely effective debris eliminating process.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.3
• /
• pp.311-316
• /
• 2007

This study was performed to develop a functional yellow layer cake with added cuttlefish ink, by evaluating its physiochemical properties and sensory qualities. Viscosity tended to increase, and height decrease, with the addition of cuttlefish ink. The sensory evaluation revealed the addition of cuttlefish ink in the cake. Specifically, at the 0.3% level color, flavor, and gumminess were enhanced. The brightness(L) of the crumb was highest in the in the control group, at 72.76, and decreased with increasing amounts of cuttlefish ink. The crust of the yellow layer cake was highest in the control group. Furthermore, redness(a) of the crumb was lowest in the control group. but for the crust, it was highest in the control group at crust. Yellowness(b) decreased with increasing amounts of cuttlefish ink for both the crumb and crust. The hardness, cohesiveness, gumminess, and chewiness of the yellow layer cake was highest in the control group.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.21-36
• /
• 1996

With increased use of halftone dot overprints for offset color printing, it is important to study the density and ink trap of the overprints. In this research the equation to predict the density and the method to evaluate ideally the fractional ink trap are preposed. And also the halftone dot overprinting experiments of Magenta over Cyan or Cyan over Magenta under wet-on-wet or wet-on-dry overprinting using 2-color offset press show the above proposals are reasonable, and show the effect of overprinting sequence on the density and ink trap.