• Journal of the Mineralogical Society of Korea
• /
• v.2 no.1
• /
• pp.47-55
• /
• 1989

The Commission on New Minerals and Mineral Names (hereafter abbreviated as CNMMN) of the International Mineralogical Association was established in 1959 for the purpose of controlling mineral nomenclature, All proposals for introducing new minerals, changing mineralogical nomenclature, and discrediting or redefining existing minerals and mineral names should be submitted to the CNMMN for approval before publication. If approval is withheld, the proposal should not be published. This report incorporates material from previous reports on mineral nomenclature and procedures of the CNMMN (Fleischer, 1970; Donnay and Fleischer, 1970; Embrey and Hey, 1970; Hey and Gottardi, 1980; and Mandarino et al., 1984), and represents an attempt to consolidate this information and to present a there are differences between this report and the earlier ones, this versionis to be regarded as the correct one.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.3
• /
• pp.225-233
• /
• 2013

Purpose: This study was performed to evaluate the impact of the lesser toe operation on the overall clinical outcomes, and to analyze the clinical results of concomitant surgery for hallux valgus and lesser toe deformities. Materials and Methods: Forty-six cases underwent surgery for hallux valgus with concomitant lesser toe deformities were followed up for at least 1 year. Lesser toe deformities consisted of 9 crossover toes, 10 claw toes, 12 hammer toes and 15 bunionettes. Clinical evaluation was performed according to AOFAS (American Orthopaedic Foot and Ankle Society) score, patient's satisfaction score, and pain VAS (visual analogue scale) score. Hallux valgus angle (HVA), intermetatarsal angle (IMA), and period to union were measured. Preoperative expectation about lesser toe deformities, postoperative satisfaction, complication rate, hospitalization period, medical expenses, and frequency of outpatient follow-up were analyzed. Results: AOFAS score, VAS score, HAV and IMA had improved significantly. On preoperative expectation of patients, correction of lesser toe deformities was ranked third, following the improvement of big toe(bunion) pain and the correction of hallux valgus. Patient's satisfaction score was average 92.8 points, and the importance of lesser toe operation was 30.2%. When compared to hallux valgus operation only, there were average 2.5 days of additional hospitalization, 2.4 times of additional outpatient follow-up, 386000 won of additional medical expenses. Conclusion: Combined operation for hallux valgus and concomitant lesser toe deformities showed good clinical results. When compared to hallux valgus operation only, there were longer hospitalization, more frequent follow-up, more medical expenses, more complications. However, lesser toe deformity correction in patients underwent hallux valgus operation is considerable, because of high preoperative expectation and postoperative satisfaction.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.267-276
• /
• 2020

Poly(epichlorohydrin) copolyol series (PECH copolyols) were synthesized via cationic ring-opening copolymerization (ROCP) of oxirane-based monomers and effects of reaction temperature, solvent type, and initiator were studied. As a comonomer, two types of alkylene oxides were used, and polymerization conditions were conducted both with diethylene glycol (DEG) as an initiator in methylene chloride (MC) solvent and tripropylene glycol (TPG) in toluene solvent. In order to induce the active monomer (AM) mechanism in the ring-opening copolymerization reaction, the monomer was injected by an incremental monomer addition (IMA) method using a syringe pump, and the polymerization was performed at -5 ℃. PECH copolyol, a synthesized ephichorohydrin (ECH)-based copolyol, was converted to glycidyl azide-based energy-containing copolyol (GAP copolyol) by azadizing the ECH unit through a substitution reaction. It was confirmed that the synthesized azide copolyol had little effects on changes of the solvent and the initiator. Also, the molecular weight increased 500 after the azide reaction, thereby the GAP copolyol was polymerized as designed. As the content of the comonomer increased, both the T_g and viscosity tended to decrease due to the influence of the alkyl chain length. It is possible to fundamentally prevent CH₃N₃ amount produced in the azide reaction process, and it is expected that a large-scale process could be achievable.

• Journal of Chest Surgery
• /
• v.25 no.8
• /
• pp.837-843
• /
• 1992

The most common deformity of the sternum is the depression deformity, variously calid pectus Excavatum, funnel chest, schwusterbrust, trichterburst, thorax en entonnoir. During the period 1983 to 1991 a total of 15 cases of funnel chest were treated surgically at Department of Thoracic Surgery, Hanyang University Hospital. The age at the time of operation ranged from 4 to 26 years 73.3 percent of the patients were under 12 years of age They all had symptoms of feeling Inferiority about chest deformity. The concavity on the funnel chest varied in its Extent, and the severity, which was measured by water volume filled into it, varied from 45ml to 100ml. We have Experienced 15 cases of pectus Exc-avatum with several operative method, i.e., Ravitch operation in 2 cases, Taguchi operation in 3 cases[using by Both IMA], Adkins operation in 5 cases, Modified wada operation [sternal costal cartilage Elevation Technique] in 5 cases. After surgery, follow up vertebral Index showed 44%, preoperatively and 29% postoperatively, average decrement of 15%. We Reported 15 cases of funnel chest and the surgical results of thease cases were satisfactory Except one case of Ravitch operation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.185-190
• /
• 2006

The correct estimation of the ionospheric delays is very important for the precise kinematic positioning especially in case of the long baseline. In case of triple frequency system, the ionospheric delays can be estimated from the measurements, but, in case of dual frequency system, the situation is not so simple. The precision of those supplied by the external information source such as IONEX is not sufficient. The high frequency component is neglected, and the precision of the low frequency component is not sufficient for the long baseline positioning. On the other hand, the high frequency component can be estimated from the phase range measurements. If the low frequency components are estimated by using the external information source or pseudo range measurements, a more reasonable estimation of the ionospheric delays may be possible. It has already been discussed by the author that the estimation of the low frequency components by using the external information source is not sufficient but fairly effective. The estimation using the pseudo range measurements is discussed in the present paper. The accuracy is not sufficient at present because of the errors in the pseudo range measurements. It is clarified that the bias errors in the pseudo range measurements are responsible for the poor accuracy of the ionospheric delays. However, if the accuracy of the pseudo range measurements is improved in future, the method would become very promising.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.111-111
• /
• 2001

목적： To evaluate the feasibility of the event-related functional MR study using power grip studying the hand motor system 대상 및 방법： Event-related functional MRI was performed on a 1.5T MR unit in seven norm volunteers (man=7, right-handedness=2, left-handedness=5, mean age： 25 years). A single-shot GRE-EPI sequence (TR/TE/flip angle： 1000ms/40ms/90, FOV = 240 mm matrix= 64$\times$64, slice thickness/gap = 5mm/0mm, 7 true axial slices) was used for functiona MR images. A flow-sensitive conventional gradient echo sequence (TR/TE/flip angl 50ms/4ms/60) was used for high-resolution anatomical images. To minimize the gross hea motion, neck-holders (MJ-200, USA) were used. A series of MR images were obtained in axial planes covering motor areas. To exclude motion-corrupted images, all MR images wer surveyed in a movie procedure and evaluated using the estimation of center of mass of ima signal intensities. Power grip task consisted of the powerful grip of all right fingers and hand movement ta used very fast right finger tapping at a speed of 3 per 1 second. All tasks were visual-guid by LCD projector (SHARP, Japan). Two tasks consisted of 134 phases including 7 activatio and 8 rest periods. Active stimulations were performed during 2 seconds and rest period were 15 seconds and total scan time per one task was 2 min 14 sec. Statistical maps we obtained using cross-correlation method. Reference vector was time-shifted by 4 seconds an Gaussian convolution with a FWHM of 4 seconds was applied to it. The threshold in p val for the activation sites was set to be 0.001. All mapping procedures were peformed usin homemade program an IDL (Research Systems Inc., USA) platform. We evaluated the activation patterns of the motor system of power grip compared to hand movement in t event-related functional MRI.

• Journal of Korean Foot and Ankle Society
• /
• v.7 no.2
• /
• pp.174-178
• /
• 2003

Purpose: The purpose of this study was to evaluate the radiographic results and complications after the proximal dome osteotomy for hallux valgus. Material and Methods: 127 cases of clinically moderate to severe hallux valgus from October 1994 to September 1997 were included in this study. All had been surgically corrected with proximal dome osteotomy, bunionectomy, and distal soft tissue release. We compared the hallux valgus angle(HVA) and intermetatarsal angle(IMA) at preoperative, postoperative 3 weeks, postoperative 6 weeks, and postoperative 3 months. Also we reviewed the postoperative com plications. Result: The HVA averaged $34.1^{\circ}$ at preoperative, $4.3^{\circ}$ at 3 weeks after operation, $8.1^{\circ}$ at 6 weeks after operation, and $10.2^{\circ}$ at 3 months after operation. The lMA averaged $14.6^{\circ}$ at preoperative, $5.1^{\circ}$ at 3 weeks after operation, $5.6^{\circ}$ at 6 weeks after operation, and $7.3^{\circ}$ at 3 months after operation. We experienced 7 cases of malunion, 5 cases of limitation of motin at the first metatarso-phalangeal joint, 3 cases of hallux varus deformity, 2 cases of delayed union. Conclusion: Proximal dome osteotomy for moderate to severe hallux valgus deformity was considered as one of the effective treatment methods. And we try to avoid limitation of motion at the first metatarso-phalangeal joint after operation.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.54-67
• /
• 2005

This paper provides an evaluation of an optimization-based, multiple-input double-output (MIDO) run-to-run (R2R) control scheme for general semiconductor manufacturing processes. The controller in this research, termed adaptive dual response optimizing controller (ADROC), can serve as a process optimizer as well as a recipe regulator between consecutive runs of wafer fabrication. In evaluation, it is assumed that the equipment model could be appropriately described by a pair of second-order polynomial functions in terms of a set of controllable variables. Of practical relevance is to consider a drifting effect in the equipment model since in common semiconductor practice the process tends to drift due to machine aging and tool wearing. We select a typical application of R2R control to chemical mechanical planarization (CMP) in semiconductor manufacturing in this evaluation, and there are five different CMP process scenarios demonstrated, including mean shift, variance increase, and IMA disturbances. For the controller, ADROC, an on-line estimation technique is implemented in a self-tuning (ST) control manner for the adaptation purpose. Subsequently, an ad hoc global optimization algorithm based on the dual response approach, arising from the response surface methodology (RSM) literature, is used to seek the optimum recipe within the acceptability region for the execution of next run. The main components of ADROC are described and its control performance is assessed. It reveals from the evaluation that ADROC can provide excellent control actions for the MIDO R2R situations even though the process exhibits complicated, nonlinear interaction effects between control variables, and the drifting disturbances.

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.1
• /
• pp.87-93
• /
• 2005

Purpose: We conducted this study to examine the clinical results of the proximal metatarsal wedge osteotomy using a single screw fixation and the distal soft tissue procedure in patients with moderate to severe hallux valgus deformity. Materials and Methods: Between February 2002 and February 2004, we performed these procedures on 12 patients (15 cases). The 6 cases of all patients had mild to moderate instability in the first MTC (metatarsocuneiform) joint. We estimated the clinical outcomes, the radiological findings and complications. Results: AOFAS score was improved from preoperative 41.5 points to 87.7 points lastly on average. The mean correction angle of HVA and IMA was $23.8^{\circ}$ and $6.6^{\circ}$, respectively. The mean position of tibial sesamoid was 2.67 before surgery and 0.87 after surgery. The mean shortening of the first metatarsal bone was 3.07 mm after surgery. There was no pain and complications on the first MTC joint except the breakage of screw in one case and instability of the first MTC joint was improved postoperatively. Conclusion: We obtained good clinical and radiographic outcomes in our series. So, proximal metatarsal wedge osteotomy using a single screw fixation and distal soft tissue procedure seems one of the good surgical treatments for moderate hallux valgus deformity.

• Journal of the Korean Society of Costume
• /
• v.19
• /
• pp.83-103
• /
• 1992

This thesis researched the ritual dress of Korean new religions such as Suungyo, Mirubulgyo, Taejonggyo and WonBuddhism, According to kind, color, cloth and shape this thesis analyzed the ritual dress of them on the basis of its literatures. I. The results of the ritual dress of them through its literatures are as follows: 1. In case of Suungyo, there are Songwansonbok, Togwandobok, Pulmogwan, Ch'onui, Chap'ae , Yukhwangang, Pobdae, Hakp'yo and Kyonjang in its kind. In its color there are Huk, Cha, Hoe, Chahwang, Hong, Paek, Hwang, ROk, and Nam. Chemical fiber with one layer is used in its cloth. Its shape is made by a comprise between the feature of Korean dress, chuui and that of the existing dress of Confucianim, Buddhism and Taoism. 2. In case of Mirukbulgyo, Inhwag-wan, Chongbok, P'oui, Tae, Moson, Yomju and tanju are systematized in its kind. In its color there are Paek, Huk, ch'ong,Chok, Ok and Rok, Kongdan and chemical fiber with one layer are used in its cloth. Its shape has a symbolic form of Yu'Pul and son based upon Korean dress, Chuui. In its symbol Inhwagwan symbolized Confucianism and Chongbok Taoism and P'oui Buddhism. 3. In case of Taejonggyo, there are Chusabok, Sjhobok, Yewonbok, Chusamo, Yewonmo, Tae and Hwa in its kind. In its color there are Paek(main one), Nam, Huk, Chaju, Chok, Hwang and Hoe. Kongdan with both sides is elaborately used in its cloth. Its shape thken from Korean dress means the succession of the national spirit of the white-clad folk. 4. In case of won Buddhism, there are kybok and Pobrak in its kind. In its color there are Paek, Huk and Hoe---especially, both Hwangt'o and Hwang are used in Pobrak, Anyone can use cloth at his will. In its shape Kyoblk for man is Yangbok and Kyobok for woman is Tongch'ima and Chogori, a style of Korean dress. Pobrak is a form Tanryong worm with Rakja.