• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1992-2001
• /
• 1999

We address the frequency management in the IMT-2000 CDMA system. The system characteristics such as multiple classes of services, multiple kinds of channels with different bandwidths, overlaid cell structure, etc. are examined to make way for the problem definition. The problem is formulated as a constrained optimization model, the objective of which is to consume as narrow bandwidth as possible while satisfying various multimedia demands with required QOSs. A solution algorithm is developed which generates two sets of optimal decisions: 1) which combination of service classes to assign to each cell, 2) which set of frequency channels of varying bandwidths to allocate to each cell. The effectiveness of the proposed deployment policy is demonstrated via computational experiments.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.197-200
• /
• 2002

본 논문에서는 IMT-2000용 AB급 대전력 증폭기를 설계 및 제작하였다. 전력증폭기의 주파수 대역은 IMT-2000용 순방향 주파수인 2110MHz-2170MHz에서 AB급으로 동작하도록 하였고, 고효율성과 우수한 선형성 소자인 LDMOSFET를 사용하였다. 설계 특성에 맞는 최적부하를 찾아 마이크로 스트립 회로로 입력 및 출력 정합 회로를 구현하였다 임피던스 정합 방법으로는 소자를 실제 측정상태에서 입력단과 출력단에 튜너를 삽입하고 기본 주파수에서 최대 출력상태를 만족하는 임피던스를 튜너로 구현한 후, 튜너를 제거하고 튜너의 입력 임피던스를 Network Analyzer로 측정하여 최적 부하 임피던스를 추출하는 로드풀 방법을 사용하였다. 대전력 증폭기의 측정결과로는 2-톤 인가시 40.57dBm의 출력결과를 얻을 수 있었고 30.61dBc의 상호 혼변조 특성을 확인하였으며, 원신호의 하모닉(Hamonic) 주파수 성분과는 21.46dBc의 차이를 보였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.121-123
• /
• 2001

최근 이동 통신의 급격한 성장으로 인하여 동일한 통신 서비스간의 간섭 뿐 아니라 서로 다른 서비스간의 간섭 문제가 통신 서비스의 품질을 저하시키는 주된 요인으로 작용하고 있다. 특히, CDMA-based 시스템은 간섭에 의해 용량이 제한되므로 CDMA-based 시스템인 기존의 IS-95 및 PCS 서비스, 그리고 차세대 이동 통신인 IMT-2000/CDMA 시스템의 용량 개선을 위한 연구 및 효율적인 무선망 설계를 위한 연구가 필요하다. 본 연구에서는 IMT-2000/CDMA 시스템의 효율적인 링크 분석(Link Analysis)을 하는데 필요한 시스템 성능 평가와 시스템 통화용량을 산출하는 프로그램을 개발하고자 한다. 여기서, 시스템 성능을 예측하기 위해서는 신호 대 잡음 전력비 (E$_{b}$N$_{o}$ )의 개념이 요구된다. 시스템 통화용량은 잡음 특성이 매우 이상적인 상태를 기준으로 하여 역방향 최대 용량을 산정하는 Pole Capacity 산출 방식과 호차단율(B1ocking Probability)로부터의 통계적 산출 방법인 Erlang Capacity 산출 방식을 적용한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.1
• /
• pp.24-36
• /
• 2003

The digital mobile communication will be developed till getting multimedia service in anyone, any where, any time. Theses requiring items are going to be come true via IMT-2000 system. Transmitting signal bandwidth of IMT-2000 system is 3 times as large as IS-95 system. That is mean peak to average of signal is higher than IS-95A system. So we have to design it carefully not to effect in adjacent channel. HPA(High Power Amplifier) located in the end point of system is operated in 1-㏈ compression point(Pl㏈), then it generates 3rd and 5th inter modulation signals. Theses signals affect at adjacent channel and RF signal is distorted by compressed signal which is operated near by Pl㏈ point. Then the most important design factor is how we make HPA having high linearity. Feedback, Pre-distorter and Feed-forward methods are presented to solve theses problems. Feed-forward of these methods is having excellent improving capacity, but composed with complex structure. Generally, Linearity and Efficiency in power amplifier operate in the contrary, then it is difficult for us to find optimal operating point. In this paper we applied algorithm which searches optimal point of linear characteristics, which is key in Power Amplifier, using minimum current point of error amplifier in 1st loop. And we made 2nd loop compose with new structure. We confirmed fabricated LPA is operated by having high linearity and minimum current condition with ACPR of -26 ㏈m max. @ 30㎑ BW in 3.515㎒ and ACLR of 48 ㏈c max@${\pm}$㎒ from 1W to 40W.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.75-82
• /
• 2000

In this paper, described is the comparison of performances based on the computer simulation under IMT-2000 environment between multicode and multicarrier CDMA system for the design of wireless systems using wideband CDMA technology. From simulation results, it can be concluded that both multicode and multicarrier CDMA scheme show comparable performances. Diversity scheme of RAKE receiver is indispensible for both multicode and multicarrier CDMA systems under IMT-2000 outdoor B and vehicular B channel environment. Either Hadamard matrix or PN sequence can be used as the orthogonal code as far as the orthogonality is kept. Finally, with increasing chip rate and less users, performance is getting better.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.2
• /
• pp.56-63
• /
• 2003

We investigate some implementation factors that affect the performance of multi-rate parallel interference cancellers (PICs) for the international mobile telecommunications-2000 (IMT-2000) 3rd-generation partnership project (3GPP) system. We consider the simple multi-rate PIC [1,2] that can remove effectively multiple access interference (MAI) through block-based detection and sample-based cancellation in asynchronous user environments. The PIC structure has significantly lower complexity as compared with that of the existing scheme, especially as the number of users increases. We analyze the effects of timing error, oversampling rate, unsynchronized users and/or outer-cell interference, and the number of Quantization bits on the PIE performance through extensive computer simulations. The models for such factors and the optimum parameters are drawn. Finally, we evaluate the receiver complexities of the PIC receivers employing using the advanced removal scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.853-864
• /
• 2001

In this paper, system model is based on proposed standardization by 3GPP(Asynchronous IMT-2070 system), and we have analyzed the performance of the DS-CDMA/QPSK which cancelled self-interference, so that occurs when the received signal time is delay by multipath fading. We proposed the new scheme that designed for self-interference cancellation and the system performance is calculated in Rician fading and Rayleigh fading channel. The proposed rake receiver can be achieved a gain of about 1 [dB]∼6 [dB] more than generally rake receiver, and will be a very effective method to improve the performance of IMT-2000, and these data can be available for modem design of DS-CDMA.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.829-832
• /
• 1999

In this paper, We propose design and implementation method of Modulator for IMT-2000 over reverse link. Parameters necessary for each block use those specified in cdma2000, i.e. standard for third generation cellular mobile communication which is proposed in currently North America. As software tool for modulator design, We implemented using MAX＋PLUS II that ALTERA support. Our System is totally composed of eight block and make it possible to transmit four channels(PICH, FCH, SCH, DCCH) simultaneously. Also the system is designed to make it possible to transmit data up to maximum 384kbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1314-1321
• /
• 1999

This paper presents a performance comparison of commercial realtime operating systems which is widely used and guarantees short response time for call processing in IMT-2000 base station. For this, we analyzed wireless call process and extracted primitives which have strong influence on the performance of the system are derived. Constructing and running a test-bed for call processing on the basis of the analysis, we tested if there's a bottleneck in the performance of the system and compared the performances among the commercial realtime operating systems.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.77-80
• /
• 2002

In this paper, we analyze a physical layer of W-CDMA .system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance with different channel estimation algorithm in Jakes fading channel environment. For the channel estimator, we used the WMSA(Weighted Multi-Slot Averaging) algorithm, EGE(Equal Gain Estimation) algorithm and SSE(Symbol-to-Symbol Estimation) algorithm. This study will be useful in the analysis and design of W-CDMA system.