• Journal of Sensor Science and Technology
• /
• v.22 no.6
• /
• pp.393-399
• /
• 2013

We propose a method of sensing the rotation and distance of a camera by using a fisheye lens system as a vision sensor. We estimate the rotation angle of a camera with a modified correlation method by clipping similar regions to avoid symmetry problems and suppressing highlight areas. In order to eliminate the rectification process of the distorted points of a fisheye lens image, we introduce an offline process using the normalized focal length, which does not require the image sensor size. We also formulate an equation for calculating the distance of a camera movement by matching the feature points of the test image with those of the reference image.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.75-81
• /
• 2008

The effect of the fault could be propagated to healthy region when the fault on the power system is not cleared in time. In order to enhance reliability of the protective relay, a dual and/or backup system is adopted for the power system protection. The IEC61850 has become an international standard of the substation automation system for interoperability between heterogeneous IEDs from different vendors. This paper introduces a reliability enhancement technique for the substation automation system using characteristics of the IEC61850.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.3
• /
• pp.231-239
• /
• 2017

A novel current control technique with fast response and application in an unbalanced system is proposed in this paper. Contrary to the conventional PI and dead-beat current control techniques, the proposed method is adopted to the valley current mode control (VCMC) and average current mode control (ACMC) methods to overcome the phase delay caused by conventional methods. The advantages of the proposed system are simplicity of structure and ease of implementation. The VCMC and ACMC methods are established and applied to the buck converter, boost converter, three-phase PWM converter, and three-phase inverter. The control performances of the proposed systems are shown by computer simulations and verified by experimental results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.158-162
• /
• 2009

$Zn_2SiO_4$:Mn green phosphors doped with Ga for PDP were synthesized by solid state reaction method. Photoluminescence measurements showed a new emission peak at around 600 nm for $Zn_2SiO_4$:Mn phosphors doped with Ga. Also, the luminescent color with doping $Ga^{3+}$ in the $Zn_2SiO_4$:Mn phosphors changed to green from yellowish green. Consequently, the new peak and charge of the luminescent color in the $Zn_2SiO_4$:Mn, Ga phosphors were attributed to $^2E{\rightarrow}^6A_2$ transition of $Mn^{4+}$.

• Communications for Statistical Applications and Methods
• /
• v.22 no.4
• /
• pp.313-320
• /
• 2015

In this research, we compare the efficiency of two test procedures proposed by Prentice and Gloeckler (1978) and Park and Hong (2009) for grouped data with possible right censored observations. Both test statistics were derived using the likelihood ratio principle, but under different semi-parametric models. We review the two statistics with asymptotic normality and consider obtaining empirical powers through a simulation study. The simulation study considers two types of models the location translation model and the scale model. We discuss some interesting features related to the grouped data and obtain null distribution functions with a re-sampling method. Finally we indicate topics for future research.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.270-272
• /
• 2004

At the water supply field, high voltage induction motor is main facility of a load equipment. The motor is often out of order and its noise, generated heat, loss etc occurred occasionally. especially, transmission motor for flux control generates an amount of the harmonics then have a bad influence upon the electric power system. In this study, to analyze the total harmonics distortion of the water supply field receiving high voltage, the harmonics measured and analyzed using the PQA(Power quality Analyzer) according to the electric power system and electrical load and the reduction method presented.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.1
• /
• pp.37-42
• /
• 2001

Ridge regression is compared with multiple linear regression (MLR) for determination of Research Octane Number (RON) when the baseline and signal-to-noise ratio are varied. MLR analysis of near-infrared (NIR) spectroscopic data usually encounters a collinearity problem, which adversely affects long-term prediction performance. The collinearity problem can be eliminated or greatly improved by using ridge regression, which is a biased estimation method. To evaluate the robustness of each calibration, the calibration models developed by both calibration methods were used to predict RONs of gasoline spectra in which the baseline and signal-to-noise ratio were varied. The prediction results of a ridge calibration model showed more stable prediction performance as compared to that of MLR, especially when the spectral baselines were varied. . In conclusion, ridge regression is shown to be a viable method for calibration of RON with the NIR data when only a few wavelengths are available such as hand-carry device using a few diodes.

• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.463-468
• /
• 2006

This paper analyzed the JPEG compression performance of MTSAT-lR (Multi-functional Transport Satellite-1 Replacement), which is offering the LRIT/HRIT (Low Rate Information Transmissio/High Rate Information Transmission) service now, in order to design the system regarding LRIT/HRIT of COMS (Communication, Ocean and Meteorological Satellite). To do so, we analysed Lossy and Lossless JPEG compression performance regarding the MTSAT-1R LRIT/HRIT data for 10 days, and made comparison to the image characteristics, and understood the JPEG compression characteristics regarding JPEG compression of geostationary meteorological satellite. This result of compression performance analysis is expected to be a reference not only to the system design and realization of COMS LRIT/HRIT but also to those who develop other meteorological satellite receiving systems.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.989-993
• /
• 2001

The carbonyl stretching vibration, νC=O of 2-cyclohexene-1-one, is in Fermi resonance with a combination tone. The amount of Fermi resonance interaction between these two modes is dependent upon the amount of solute/solvent interaction due to hyd rogen bonding between the carbonyl oxygen and the solvent proton. The corrected νC=O frequency of 2-cyclohexene-1-one occurs at a lower frequency than the observed νC=O mode of cyclohexanone, possibly caused by expanded conjugation effects. The carbonyl stretching modes of cyclic ketones were also affected by interaction with the ROH/CCl4 mixed solvent system.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.11
• /
• pp.1255-1260
• /
• 2001

The expansion of two different kinds of hydrodynamic size of polymethyl methacrylate (PMMA Mw: 1.56- 2.04 ${\times}$ 106 g/mol) has been measured by dynamic light scattering and viscometry above the Flory $\theta$ temperature of the variou s solvents such as n-butyl chloride, 3-heptanone, and 4-heptanone. The expansion of PMMA chains was analyzed in terms of universal temperature parameters and also compared with previous results of polystyrene (PS) system. First it was found that simple $\tau/{\tau}c$ parameter no longer had its universality for the expansion behavior of hydrodynamic size in the chemically different linear polymer chains. However after modifying ${\tau}/{\tau}c$ parameter into $(Mw/Ro2)3}2(\tau/\tauc)$, we observed a much better universality for both PMMA and PS systems. Here Mw, Ro, $\tau[=(T-{\theta}$)/${\theta}$]$, and ${\tau}c[=({\theta}-Tc)/Tc]$ are defined as the weight average molecular weight, the unperturbed end-to-end distance, the reduced temperature and the reduced critical temperature, respectively.