• Korean Journal of Remote Sensing
• /
• v.18 no.4
• /
• pp.209-220
• /
• 2002

We carried out studies on SAR image intensity and interferometric phase over oyster sea farms. Strong backscattering was observed in amplitude images, and that was considered as a radar signal double bouncing from horizontal bars. These sea farming structures are not visible in satellite optical images except IKONOS image, so that it demonstrates the value of radar remote sensing as an effective tool in support of sea farm detection. The intensity of the image is sensitive to system parameters including wavelength, polarization, and look direction, but does not correlate to tide height. We found that the strongest backscattering can be obtained by L-band HH-polarization with a look direction perpendicular to the horizontal bar. We also succeeded in generating 21 coherent JERS-1 SAR interferometric pairs over the oyster farms. The general trend of the fringe rate of the interferometric phases appeared to be governed by altitude of ambiguity. The general trend was modeled by an inverse function and removed to have a residual phase. The residual phase showed a linear relation with the tide height. The results demonstrate for the first time that SAR can possibly be used to estimate sea level. However, the r.m.s. error of a regression line is 11.7 cm, and that is so far too large to make reliable assessments of sea level in practical applications. Further studies is required to improve the accuracy specifically using multi-polarization SAR data.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.52-55
• /
• 2006

It's used to be said that tsunami is a rare event. The recurrence time of tsunami in Sumatra area is approximately 230 years as CalTech Research Group‘s study from paleocoral. However, the tsunami occurred in Indian Ocean on 26 December 2004, 28 March 2005 and 17 July 2006, because the earthquakes still release the energy. To cope with the tsunami disaster, we have to put the much effort on better disaster preparedness. The Tsunami Reduction Of Impacts through three Key Actions (TROIKA) was suggested by Eddie N. Bernard, the director of NOAA/PMEL (Pacific Marine Environmental Laboratory). They are Hazard Assessment, Mitigation and Warning Guidance. The satellite remote sensing has potential on these actions. The medium and high resolution satellite data were used to assess the degree of damage at the six-damaged provinces on the Andaman seacoast of Thailand. Fast and reliable interpretation of the damage by remote sensing method can be used for inundation mapping, rehabilitation and housing plans for the victims. For tsunami mitigation, the satellite data can be used with GIS to construct the evacuation map (evacuation route and refuge site) and coastal zone management. It is also helpful for educational program for local residents and school systems. Tsunami is a kind of ocean wave, therefore any satellite sensors such as SAR, Altimeter, MODIS, Landsat, SPOT, IKONOS can detect the tsunami wave in 2004. The satellite images have shown the characteristics of tsunami wave approaching the coast. For warning, satellite data has potential for early warning to detect the tsunami wave in deep ocean, if there are enough satellite constellation to monitor and detect the first tsunami wave like the pressure gauge, seismograph and tide gauge with the DART buoy can do. Moreover, the new methods should be developed to analyse the satellite data more faster for early warning procedure.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.31-34
• /
• 2009

본 연구에서는 KOMPSAT-3급 고해상도 위성영상을 이용하여 전처리 후 정밀 농업 주제정보를 추출하는 방법론을 제시하고자 하였다. 분석에 사용한 KOMPSAT-3급 고해상도 위성영상은 IKONOS (2001/5/25, 2001/12/25, 2003/10/23) 3개의 영상, QuickBird (2006/5/1, 2004/11/17) 2개의 영상, KOMPSAT-2 (2007/9/17) 1개의 영상 등 모두 6개의 영상을 확보 및 각각에 대한 현장 GCP자료 및 RPC, RPB 자료를 수집하여 정사보정을 실시하였다. RMSE는 약 $0.12\sim3.18$의 값으로 분포되었다. KOMPSAT근 급 영상자료로 부터 정밀농업물재배지도를 작성하기 위해 각 벤드별 Scatter기법을 이용하여 각 밴드간의 상간관계를 살펴보고, 3개의 최적의 밴드를 선정하였다. 또한 작물별 최적의 밴드 결정을 위해 각 밴드별 픽셀 값을 사용하여 Texture 분석을 실시하였다. 그 결과 논의 경우 모든 밴드에서 분석이 용이 한 것으로 분석되었으며, 4밴드의 경우 3개의 작물(고추, 옥수수, 벼)의 분석시 매우 적합한 밴드인 것으로 분석되었다. 각 영상별 필터링 기법과, ISODATA 방법을 이용한 정밀농업 토지이용도 작성하여 기존 스크린 디지타이징 기법으로 작성한 정밀토지이용도와 비교하였다. 다양한 식생정보를 추출하는 위하여 확보된 영상자료로부터 RVI, NDVI, ARVI, SAVI 식생지수 를 추출하였으며, 그 결과를 현장자료로부터 추출한 식생지수간의 결과 값과 비교분석하였다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.6
• /
• pp.64-73
• /
• 2008

The purpose of this study is to classify urban green space, to assess an imbalance by an administrative district (Dong), and to establish the management zone of urban green spaces for the construction of an environmental city in Changwon. The spatial data of 1:5,000 digital maps, park data in Changwon, land cover by the Ministry of Environment, and IKONOS satellite images from 2003 were used for this analysis. The assessment of the imbalance of urban green spaces was analyzed with the Lorenz curve and Gini's coefficient. The establishment of the management zone was performed by network analysis of GIS. The results of this study are as follows: the urban green spaces were classified as a park green space, a natural green space, and a riparian green space. According to the results of assessment of the imbalance of green spaces, Gini's coefficient was analyzed at higher than 0.4. Thus, the spatial imbalance of urban green spaces in Changwon was evident. The management zones to solve the imbalance were established: "rich zone", "fair zone", "poor zone" and "broken zone". Therefore, the rich and fair zones which have rich green spaces must maintain the good conditions through analysis of the green network and a survey of civic attitudes. The poor and broken zones which have poor green spaces must improve quality and quantity through creation of additional green spaces, construction of an eco-industrial park, and utilization of children's parks and pocket parks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.583-590
• /
• 2012

This study proposes fusion image matching method according to land cover property to generate a detailed DEM using the high resolution IKONOS-2 stereo pair. A classified image, consists of building, crop-land, forest, road and shadow-water, is produced by color image with four bands. Edges and points are also extracted from panchromatic image. Matching is performed by the cross-correlation computing after five classes are automatically selected in a reference image. In each of building class, crop-land class, forest class and road class, matching was performed by the grid and edge, only grid, only grid, grid and point, respectively. Shadow-water class was excepted in the matching because this area causes excessive error of the DEM. As the results, edge line, building and residential area could be expressed more dense than DEM by the conventional method.

• Journal of KIISE:Software and Applications
• /
• v.32 no.7
• /
• pp.674-682
• /
• 2005

This paper proposes classification of multi-spectral satellite image based on fusion of fuzzy G-K (Gustafson-Kessel) algorithm and PCM algorithm. The suggested algorithm establishes the initial cluster centers by selecting training data from each category, and then executes the fuzzy G-K algorithm. PCM algorithm perform using classification result of the fuzzy G-K algorithm. The classification categories are allocated to the corresponding category when the results of classification by fuzzy G-K algorithm and PCM algorithm belong to the same category. If the classification result of two algorithms belongs to the different category, the pixels are allocated by Bayesian maximum likelihood algorithm. Bayesian maximum likelihood algorithm uses the data from the interior of the average intracluster distance. The information of the pixels within the average intracluster distance has a positive normal distribution. It improves classification result by giving a positive effect in Bayesian maximum likelihood algorithm. The proposed method is applied to IKONOS and Landsat TM remote sensing satellite image for the test. As a result, the overall accuracy showed a better outcome than individual Fuzzy G-K algorithm and PCM algorithm or the conventional maximum likelihood classification algorithm.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.3
• /
• pp.322-331
• /
• 2003

As the complexity of a 3D game is increased by various factors of the game scenario, it has a problem for controlling the interrelation of the game objects. Therefore, a game system has a necessity of the coordination of the responses of the game objects. Also, it is necessary to control the behaviors of animations of the game objects in terms of the game scenario. To produce realistic game simulations, a system has to include a structure for designing the interactions among the game objects. This paper presents a method that designs the dynamic control mechanism for the interaction of the game objects in the game scenario. For the method, we suggest a game agent system as a framework that is based on intelligent agents who can make decisions using specific rules. Game agent systems are used in order to manage environment data, to simulate the game objects, to control interactions among game objects, and to support visual authoring interface that ran define a various interrelations of the game objects. These techniques can process the autonomy level of the game objects and the associated collision avoidance method, etc. Also, it is possible to make the coherent decision-making ability of the game objects about a change of the scene. In this paper, the rule-based behavior control was designed to guide the simulation of the game objects. The rules are pre-defined by the user using visual interface for designing their interaction. The Agent State Decision Network, which is composed of the visual elements, is able to pass the information and infers the current state of the game objects. All of such methods can monitor and check a variation of motion state between game objects in real time. Finally, we present a validation of the control method together with a simple case-study example. In this paper, we design and implement the supervised classification systems for high resolution satellite images. The systems support various interfaces and statistical data of training samples so that we can select the most effective training data. In addition, the efficient extension of new classification algorithms and satellite image formats are applied easily through the modularized systems. The classifiers are considered the characteristics of spectral bands from the selected training data. They provide various supervised classification algorithms which include Parallelepiped, Minimum distance, Mahalanobis distance, Maximum likelihood and Fuzzy theory. We used IKONOS images for the input and verified the systems for the classification of high resolution satellite images.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.621-626
• /
• 2006

Today's commercial high resolution satellite imagery such as IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Extraction of 3D building information from high resolution satellite imagery is one of the most active research topics. There have been many previous works to extract 3D information based on stereo analysis, including sensor modelling. Practically, it is not easy to obtain stereo high resolution satellite images. On single image performance, most studies applied the roof-bottom points or shadow length extracted manually to sensor models with DEM. It is not suitable to apply these algorithms for dense buildings. We aim to extract 3D building information from a single satellite image in a simple and practical way. To measure as many buildings as possible, in this paper, we suggested a new way to extract building height by triangular vector structure that consists of a building bottom point, its corresponding roof point and a shadow end point. The proposed method could increase the number of measurable building, and decrease the digitizing error and the computation efficiency.